When working with a computer, failures often occur. Some of them can lead to bad consequences, up to a complete system failure. To fix it this problem you need to roll back the system. In this article, we will tell you how to rollback windows 7 system to a specific date. It is quite possible to perform such actions and there is nothing beyond natural in this.

Reasons There are many reasons for this. First of all, it is the incompetence of the user himself. Knowledge about the computer and working with it is not enough, but the desire to delve into the folder under named windows, where all the information about this system is stored, takes over. There are situations when, due to inexperience or carelessness, the necessary data is deleted and, starting from the first reboot, the computer stops working.

The second reason is viruses. The computer is constantly exposed to a significant number of virus attacks, and viruses can easily enter the system. This should never be forgotten, especially when working with the Internet.

Recover using system tools Recover the system using standard program quite real, if, nevertheless, the reason is not a viral damage to the operating system. Before rolling back, you need to check your computer for virus infection. If this is the case, then the system just needs to be cleaned. After complete removal all virus programs can begin to rollback the system.

Actions begin by going to the Start menu. Next, you need to click on the line "All programs" and find the "Standard" section. After opening the section, click on the "System" folder. In the menu, select the section "Windows 7 System Restore". After that, the system will scan the computer for a few minutes and open the system recovery program. In the pop-up window, select the date to which you want to rollback. Then click Next and wait until your computer restarts.

It is worth noting that a system rollback cannot be carried out for a certain time, since for this you need to create restore points. To successfully complete the process, you must make sure that the computer system itself has the ability to create restore points. Usually this feature is enabled by default at the factory settings of the computer. In addition, there are programs that allow you to create such points yourself.

Rollback using disks Use this method in cases where an attempt to rollback using system tools is unsuccessful. To do this, you need a recovery disc. It is necessary after turning on the computer to insert the media and boot the first stage. Further, you just need to consistently execute the commands according to the instructions that appear on the screen. Everything, the system is rolled back!

Conclusion Now you know how to rollback windows 7 to a specific date. It is advisable to create a restore point yourself or check if it exists at all before installing each program. Thus, you can avoid serious consequences by keeping the previous settings and programs installed earlier.

noblefox.ru

How to rollback windows 7

Each of us, in the course of using a computer, faces various problems, it simply cannot be avoided. Someone catches a virus, someone has a program failure, or even a system failure, problems can be described for a long time. They cope in different ways, someone calls specialists, someone is looking for a suitable antivirus, or reinstalls something. But the easiest way is to roll back the system to the date before the problems.

System rollback will restore the system files to the date when the restore point was created, and the programs installed after will be removed from the system. Documents, files, music, films will not be affected. Therefore, I recommend creating them manually from time to time. The operating system itself creates them once at a certain time and before installing programs that may affect system files.

And so press start - all programs - standard - service - system restore

System Restore will start, click Next

At the next step, you will see all the current restore points, if you need everything at all, including the old ones, then check the box next to "Show other restore points". Then select the desired restore point and click next. Please note that there is a description for each restore point, sometimes it is very useful. (for example, "The point was created before installing such a program")

At the next step, confirm the decision by clicking on the "DONE" button

ya-computer.ru

How do I restore the system to an earlier date?

In this article, I will talk about how to restore the operating system to a working state if any problems started in the system.

Sometimes it happens that after installing an unknown program or updating the driver, the system starts working incorrectly or stops starting altogether.

In most cases, such problems are solved by restoring the system at an earlier date.

That is, before installing some programs or drivers on the system partition hard disk a restore point is created or updated. This is done so that you can roll back the system in case of problems.

If the system suddenly starts working incorrectly, then you should first use the last good configuration or safe mode. Here's how to do it.

If the first method did not help, then you need to perform a system restore.

How do I restore the system?

After the operating system is installed, recovery is enabled by default. It is highly discouraged to turn it off, because if there are no restore points, you will have to reinstall the OS in case of malfunctions ...

In order to enter the system recovery menu, you must first open the control panel and select Recovery. If you have windows 7, then System Restore is located both in the Control Panel and in the Start / All Programs / Accessories / System Tools.

A window with the following content will appear:

System recovery menu

Creating a recovery disc - recording the operating state of the operating system to a flash drive or DVD disc. A useful thing that will help to restore the stable operation of the system, even if it cannot be started. Recovery is performed using a bootable image.

Launching System Restore - Cancels all performed actions on the system and restores the last working state until the OS was affected by any application or user action.

At startup, a window will appear with the choice of previous dates and times when the system worked normally. In order to restore, select the date you need and follow the path - further. You will have to wait a little while until the system rolls back.

Also, you can see which programs may be affected after recovery.

System recovery settings

In the settings, you can choose on which partitions the restore points will be created, the amount of disk space for creating points and directly creating a point right now.

Protecting the system from unwanted changes

When you click the Configure button, you will be presented with a choice between enabling or disabling recovery (of course, it is recommended to enable it), as well as a choice of disk space.

Recovery settings

You can leave the default size or choose a larger one (for better effect). After that, space will be reserved on the C: / drive and will be filled as required.

Also you can see the occupied space by the restore point.

If it is not possible to boot the operating system, then insert the installation disc with the OS and preload it (it must be set in the BIOS in the BOOT CD-DVD ROM section first in the list, otherwise the disc will not boot, but the OS will boot. The first in the list should be stand for an optical drive or flash drive, and the second - hDD (HDD)). After loading the disk in the initial window for installation at the bottom will be the item "System Restore". This menu will be the same as described above.

pc-optimize.ru

How to create a restore point in windows and roll back the system

Regularly working with a computer, there is a high probability of "catching" a virus that will affect the stability of the operating system. If removing all threats with an antivirus program and uninstalling recently installed programs and drivers did not help, you will have to use Windows 7 system rollback.

Today I will tell you about several ways to do this. Don't think it's hard. Any novice user can handle it.

What is a rollback point?

A rollback point (TO) or a restore point (TV) is a version of Windows OS hidden in the archive (What is data archiving). It can be used in the future to resume computers. TO is created either automatically by the system (after each installation of new software or drivers), or independently by the user. No point windows recovery this process cannot be performed.

We create TO for our own safety

If you do not want to worry about the safety of your own data, create a TV before installing new programs and drivers and if you plan to make changes to the registry or BIOS configuration. To create a backup archive, you need to follow a few simple steps. This is done in a few minutes.

Click the "Start" button (located in the lower left part of the screen) and follow the path: "Computer - Properties - System Protection". The following should open:

Through this window, not only the creation of TO takes place, but also the direct restoration of the operating system. Before starting, check that protection is activated on the system disk. If not, click the "Configure" button. A window will open in which you need to select the desired partition and the amount of memory that will be allocated for backups (3-5 GB is enough).

Now we turn to the process of forming a restore point. As many of you have guessed, it begins with clicking the "Create" button.

In the field of the window that opens, enter a description. For example, if you plan to install the "Example" program, you can specify its name. If it comes to a rollback, it will make it easier to navigate. It is worth noting that TO can be stored in a computer from several weeks to several months. Therefore, if you created it a few days ago, you can easily use this point.

We carry out a rollback through "Start" and "Run"

If your computer has stopped working stably, but it starts up, then you can restore it directly from the windows interface. First you need to open system utility... This can be done in two ways.

The first one is to go to "Start" and type "restore ..." in the search bar. An issue will appear where you need to select the "System Restore" application. Second - through command line... To open it, press the key combination Win (located between CTRL and ALT) + R. In the line type "rstrui.exe" (without quotes). Using any method, the required program will open, which looks like this:

The next page will display a list of available restore points. Select the one you need (be guided by the description and creation date).

At the final stage, you need to select a system drive and click the "Finish" button. Another window will appear. In it, click "Yes". The rollback will take place over the next few minutes. It will end after rebooting the system. Information about the end of the return of the previous parameters should appear on the opened desktop. If no changes have occurred, try repeating the process, but with an earlier TV.

Using Last Known Good Configuration

If the malfunction is so critical that operating system does not start, you have to use this method. In fact, it is the simplest one. It is necessary to take a minimum of steps to return your PC to work.

Reboot the PC and, after loading the BIOS (when the start screen picture ends), press the F8 key several times (located at the top of the keyboard above the standard numbers). This will open the page for selecting additional OS startup parameters. Here you must select Last Known Good Configuration.

If everything is normal, then stable work will be resumed. When you restart your computer after selecting the above item and returning to the previous black screen, you must use the method that I will describe below.

We activate "Safe Mode" to rollback Windows

If the methods described earlier did not help, use this. Start the reboot again and press the F8 key several times after activating the BIOS. You will see the already familiar section with a black background, where you need to select "Safe Mode":

The system will start, but with serious restrictions. I will say right away that it will not work to interact with many applications, since this mode is intended for system actions (in particular, for rollback). Run the "System Restore" utility, as we did in the first method. Only here, in the first step, you need to manually select maintenance:

Further, the algorithm of actions is already familiar: select the desired point and the system disk and agree with all subsequent conditions. After rebooting, the correct operation of the Windows OS should resume. But provided that you created the backup before the problem occurred.

We roll back the system with the installation disk and to the factory settings

Go to this method if the previous ones did not help. To use it, you must have a flash drive or disk with windows required versions how to burn an image boot disk I have already told you earlier. That is, if you have a "seven" and a disc with a "ten", then you will not be able to roll back from 10 to 7. To start, insert a disc or flash drive, restart your computer. After activating BIOS, press F9 or F11 several times.

The Windows OS installer should start. On the start page, click on the "System Restore" button.

A well-known utility will run, where you need to select a restore point, a system disk and agree with all subsequent warnings. It is possible to roll back to factory settings. But it depends on the features of the PC and the installer. This can be done at the stage of choosing a recovery tool (see the screen above):

In the next step, select the first item:

Once the process is complete, the computer will restart and you will have to re-specify the system configurations. It is worth noting the main disadvantage of this method - after it all files on the hard disk will be deleted. Don't forget to save them to the cloud.

Of course, it is better to never face such a thing, but no one is immune from the activities of modern hackers. If you want to protect yourself from modern threats, use the Dr.Web Security Space 11 antivirus program. You can buy it in a large online store software AllSoft.

Now you know where the tools needed to rollback windows 7 are located. With this knowledge, you can easily restore the correct operation of your computer if any problems arise. My article today is coming to an end.

System Restore is a critical function of the Windows operating system that allows you to restore your system to a healthy state by rolling back to a previously saved backup. It is called a rollback or restore point and is a snapshot of the system registry, some system files and installed / uninstalled programs before uninstalling or installing them, respectively.

Rollback points are created in automatic mode Windows 7 itself before making changes to the system registry (installing software, updates, unsigned drivers) or manually by the user himself at a convenient moment for him. Rollback - replaces the current system files, registry files and applications with the original ones stored in the backup. Many people wonder where these backups are stored. Physically, they are located in subdirectories of the System Volume Information folder at the root of the partition for which the protection function is activated.

Administrator privileges are required to access this directory, although there is nothing interesting for the user in it.

Before considering how to create a restore point in Windows 7, we will learn how to activate the system protection function, because in many assemblies of Windows 7 (and most users prefer to use them instead of the original copies of the OS) it is turned off in order to save disk space and other resources.

A rollback point cannot be created when system protection is disabled for a specific volume. Usually it is included only for the system partition, because backups do not affect user data (games, multimedia and text files, archives). Yes, rollback points should be created for each partition separately. Basically, they are done only for the system disk, but if applications are installed on a different volume, it is worth turning on system protection for it.

1. We open context menu directory "My Computer" and click "Properties" in the drop-down menu.
2. In the "System" window, click on the "System Protection" link, which is located in the vertical menu on the left.

The second way to call this interface element is through the control panel, which is a little longer.

1. We call it and go to the "System and Security" section, if the view of the panel items is switched to "Category".

1. We click on the icon or inscription shown in the screenshot, and we get into the known window.

1. In the tab that opens, select the required disk (as a rule, this is the system volume) and click "Configure".

1. Move the checkbox to the desired position:

• Restore system settings and previous versions of files;
• Restore previous versions of files - system settings will not be affected.

1. Below, using the "Used now" slider, set the maximum amount of disk memory of the selected volume that will be used for storage backups.

Upon reaching the specified volume limit, the oldest points will be overwritten.

The "Delete" button will delete all previously added backups for the current disk.

1. Click "OK".

How to create a checkpoint

To take a photo system settings manually is no more difficult than activating the function of creating resuscitation points. There are three ways to manage resume points in Windows 7.

1. Through Start - go to "Standard", then to the "Service" directory.

• Through system properties, as shown in the previous section.
• Through the search for the Start menu.

1. In the window that opens, click "Create".
2. In the text field, you should specify the name of the rollback point, by which you can understand the reason and conditions for its creation, after which we press Enter.

1. We are waiting for the completion of the process of copying the registry files.

1. In the dialog box with information about the successful completion of the operation, click "Close".

System state rollback

Did it fail or get errors after installing anything? It's time to use the function of returning Windows 7 to a previously saved state.

1. We call the "System Protection" window in any convenient way.

The fastest way to do this is through the Run dialog.

• We open it using the Win + R combination or the link in the Start.
• We enter and execute the "rstrui" command to call the control dialog.

1. In the first window, we get acquainted with the information of the program and click "Next".

1. Choosing a rollback point.

If the user has any problem with the computer (which usually happens as a result of recent changes in the OS or a virus infection), do not rush to reinstall it. The first and often helpful step is to roll back windows 7. What does this mean? This means returning to a previous state of the OS and restoring its settings and system files to a time when there were no failures in the computer.

Rollback points

Rollback points (TO) or in another way restore points (TV) - this is what the Windows 7 system rolls back from in case of any malfunctions in its operation. Everyone can ask where they come from. And they are created in two ways:

• They are created automatically by the operating OS itself;
• They are created by a person who cares about the "healthy" state of his computer.

The OS independently creates a TV when making critical changes to the OS, for example, when installing new software (programs and drivers).

This process cannot be controlled, therefore, below we will consider only the actions of a reasonable user to maintain the working state of his computer.

Receiving TV by user

Anyone who thinks about preserving the performance of their pet should be advised to create new TVs in the following cases:

• Before installing any new software;
• Before changing critical OS parameters (for example, operating modes of audio and video drivers, changing BIOS settings, etc.);
• Before editing the OS registry;
• Before cleaning the OS, any of the programs performing this action.

To create a TV (both your own and automatic), you need to perform a number of actions.

Click "Start", right-click "Computer", then "Properties", then "System Protection", a window appears like this:

This is a multifunctional window with which you can control both the creation of a TV and the restoration from the previous TO. The first thing to do is to make sure that the protection function is enabled on the system disk, that is, the ability to receive TO and TV and restore from them. If it is not enabled, then you will have to click "Configure" and in the pop-up window specify the disk for which this protection function is needed, and the size of the area allocated on it for creating TO.

Creating a TV in this window is done by clicking "Create", while the following window is displayed:

in which it is necessary to give a description of the created TV (for example, "Before reinstalling the AUDIO driver") and click "Create". After a short time, the OS will complete receiving the TV and display an appropriate message, in which you must click "OK".

The total size of such points is difficult to predict (especially when they are automatically created), so you should set the area size for TV within reasonable limits, for example, within a few GB, depending on the total size of the OS boot disk.

Rollback to the previous state

This action is performed in the same window in which the TV was created, only now you need to press the "Restore" button. When you press it, a window is displayed:

which contains a list of previously created TV. Usually, only one automatic TV created by the OS is displayed in this list. To see the complete list, select the Show other restore points checkbox in this window. After that, a complete list of them will be displayed, which is shown in the figure.

In this window, you need to select the appropriate TV and click "Next". Then the system will restore its state from the specified TV, reboot and display a message confirming the completion of the completed task, which should be answered by clicking "OK".

Other recovery methods

There are several more ways to solve this problem:

• If the OS does not boot and it is impossible to roll back in the already described way, then this can be done by booting in safe mode;
• Use TV created third-party programse.g. Acronis True Image Home, but this requires installing it and launching this program to create another TV. This will take a certain amount of time, depending on the speed of the system.

The Windows system is constantly updated, new features appear, bugs are fixed. It so happens that after switching to new version the computer or laptop begins to malfunction. Wrong user actions also disrupt the work. To fix these problems, you can roll back windows system 7 back.

Recovery point

The first way that will roll back the system a few days ago as of. This feature is suitable for those cases when recently installed program changed Windows configuration settings.

You can also fight few viruses with system restore points. They contain knowingly good files and drivers that are put in their places.

Automatic creation of recovery points (TBC) is performed during risky operations, for example, when updating Windows through the appropriate Center or when installing and uninstalling many applications. This allows confidently undo changesintroduced by unwanted or malicious programs. FA can also be created manually. Note that this rollback method affects program and driver files. Some of them are removed, while others are installed back. User-generated content is not affected - this is one of positive sides TVS.

Since there can be several such points, this allows you to restore the computer to a specific date or return the settings a day ago. You can also perform this operation in safe mode if you experience severe difficulties, such as constant reboot or freeze.

To store information for recovery through TVS, a certain area is allocated on the system disk. If its volume is small, then you can reduce this parameter to make room for better functionality.

Rollback tools

The Windows system has an application that solves various problems that interfere with normal startup and operation. It is stored on installation media that can be burned onto a laser disc (CD / DVD). If a computer fails to start due to serious violations or damage in important files and drivers, you can try to restore it using the appropriate program. You can also roll back Windows to a previous version if the hardware is incompatible with a more recent one. This often leads to the loss or deterioration of the device's performance after the update.

To rollback Windows 7 from the installation disc, you must:

The same functionality is available in more fresh versions... The procedure for starting Safe Mode is slightly different. To restore Windows-8, you need to go to the system setup program by checking the necessary boxes, or force restart the computerby turning it off and on three times. After that, a menu becomes available through which you can perform the required operations using a restore point or image. As in previous windows versions, experienced users can use the command line to work with particularly advanced resuscitation tools, such as DISM.

Other nuances

It is worth noting that in addition to the main files and drivers, the system image may also contain additional content, for example, personal documents and downloads, which must be protected from loss. They will carry over when recovering from a replacement computer or a failed hard drive.

A restore point only stores system and program files and drivers. So with all these tools and utilities system rollback can be guaranteed on Windows 7 and newer versions. And also to restore its performance and preserve the contents important for the owner of the computer.

Sometimes Microsoft professionals make mistakes and an update released to fix the errors only harms the computer or just makes changes that are inconvenient for the user. There are several ways to rollback Windows 7 updates. Exactly how to do this depends on the presence or absence of the required checkpoint.

Control point creation

A checkpoint is a prerequisite for recovering a system after a failure, so you need to know how to make a rollback point. It's quite simple to create it:

• Open the control panel and click on the "Recovery" section:

• In this section, click on "System Restore Settings";
• A window with system properties pops up. Selecting a disk on which the system is installed, and click "Create", as shown in the screenshot:

• To simplify orientation, we enter a description of the point (preferably detailed).

We are waiting for the completion of the creation process, which takes no more than a minute.

It should be remembered that this is the creation of a point to which you can roll back, only a prudent measure. The user does not always think about such a useful thing or does not know about it at all.

Comment. Windows 7 has the ability to automatically create rollback points after installing programs that affect system settings.

Removing problematic Windows updates

One way to roll back Windows updates is to uninstall them. This method is the simplest and does not take much time.

The first thing to do is go to safe mode... To do this, restart the computer and click on the F8 key during system boot. A window with additional boot parameters will appear, in which you must select the "Safe Mode" item.

In order to remove problematic updates and restore windows work you need the following:

For the convenience of users, by default, all updates are ordered by download date, so the latest downloaded programs are the culprits due to which crashes began to appear in Windows.

Unfortunately, such a rollback is not always possible to carry out, since the update can completely block the entrance to user interface systems.

Alternative OS rollback

If after windows updates does not start, then the only way to "revive" it is to use the recovery tool launched through the installation disk or windows image 7.

To boot the OS from external media, you need to bIOS setup... For this:

• While starting the PC, press the BIOS call button. This key may vary depending on the device model. For example, F1, F4, F11, but Delete predominates on modern computers;
• On the main top panel, we are looking for the Boot section and in the Boot Device Priority subsection (in the 1st Boot Device list) in the first place we put the device from which we want to start the download. For a disc, this is a CDROM.

Comment. You can find the BIOS call key in the instructions for the computer or on the manufacturer's official website.

Now let's move on to the recovery itself. Algorithm:

The article lists the main ways to conduct rollback windows after unsuccessful updates. It does not touch upon such radical methods as returning the system to the factory state or reinstalling the OS. Such actions should be taken only in the most desperate situations.