The program failed to complete the installation. Windows installation program failed to configure Windows to work with the equipment of this computer.

A television

Some Windows users love to reinstall the operating system when they are not able to cope with the situation and independently find a solution to the problem. For example, in the event of an unsuccessful attempt to deploy an update that led to the transition of a computer to a cyclic reset mode with the subsequent appearance of messages "We could not configure Windows Updates. Cancel changes "or" We could not complete the updates. Cancel changes. Do not turn off the computer. " Feet that one thing is that the other is growing with Windows 7 and they will not cut them into the "top ten". But it is still possible to overcome them, and for this it is not necessary to endure the system and put it again. Enough to read this instructionin which it is written what you need to do if the OS could not install windows Update 10.

Cleaning the SoftWarDistRibution folder with Windows 10 updates

Before installing updates, the system loads them into a separate directory. In most cases, its cleaning or movement helps to overcome the mentioned errors. You can do this from under the system (if access to it), and using a USB drive with files for windows installations 10.

Clearing the SoftwaredistRibution folder in

This method is suitable if you managed to log in.

Using the Windows 10 boot flash drive to clean the SoftWaredistribution

If you can not get into the system, then you will have to use the file with files to install the folder. operating system. You can in several ways, but one way or another you will need a second computer with a steadily operating OS.

After creating boot drive Make the following:

Fixing the error failed to complete Windows Update Diagnostics Center of Updates

As you may know, there are own set of tools for diagnosing and troubleshooting. Surely you often stumbled on it, but never used. Now you have an excellent opportunity to use it to solve the problem.

If you can't get into the system, then you should try another option.

Removing a duplicate profile to correct the error failed to complete Windows updates

In some cases, the failure in the process of installing Windows 10 update can occur due to a user account duplicate. Eliminate this problem You will help the registry editor. Be careful and do not touch anything superfluous to not harm the system.

In the absence of any shift for the better after applying all the written methods, you can try with data saving.

Those users who independently download the official installation image of the operating windows systems 10, of course familiar with special utility Media Creation Tool. This is a corporate instrument from Microsoft, designed to create boot media To install and update the operating system. But sometimes you may have a problem when you start Media Creation Tool. For example, the error "Installation program failed to start correctly, restart the computer." Either the application does not start at all. The causes of such a phenomenon can be several.

The most common reason is that Media Creation Tool does not work due to the fact that it will incorrectly recognizes your security system and blocks any suspicious activity. Therefore, to start standing with what to disable antivirus program and firewall (firewall).

Check the work of Media Kriayshn Tul. Did not help? Move on. Next possible reason - Your account is missing rights to launch the program. Try clicking on its icon right-click and in the menu that appears, select "Run on the administrator name". As an option, you can try to create another account windows recording With administrative rights and try whether the utility will start now.

Next reason why Media Creation Tool does not work - these are problems with local Network. Try to do the following. Run the command prompt with administrator rights. Then enter the following commands in turn: IPConfig / Release release the IP address if it turns out from the DHCP server automatically.

Then: IPConfig / Renew this we update your IP address.

And at the end, clear the cache DNS: Ipponfig / Flushdns

Now you need to check that there is access to the Internet and then check the work of the Media Kriashn Tul.

Another way to which sometimes also gets to eliminate the problem when you start a Media Creation Tool - this is clear the system temporary system files. To do this, you need in the address bar windows Explorer Specify this address:% Temp% Press the Enter key. A folder will open in which temporary files are stored. softwarewhich works or worked in the system. It looks like this:

Fully cleaning its contents and reboot. Well, if the Media Creation Tool does not work after that, then the output is one single - download the installation image and create boot disk On another computer, and then you already go to this and reinstall OS.

set-os.ru.

Windows 10 Technical Preview Build 10049 is already available!

And again we get a new assembly on the FAST update channel! The company really moved to the scheme of faster updates. The new assembly received the number 10049 and is available for download from the Windows Update Center.

Recall that the previous assembly was at number 10041, which means that the current build received only minor changes and improvements, because just a little more than a week. But, in this assembly, the new browser Spartan is included!

This assembly, as usual, not without errors. From the famous can be noted:

After logging in to the system you can see blue screen, instead of desktop. Block the computer with a hardware button, or press the Win + L key combination and log back to the system. You can also try to open the task manager with the CTRL + SHIFT + ESC keys.
Checking new messages in Outlook does not work
At this assembly it is impossible to run virtual machines Hyper-V. This error will be fixed with the update on the SLOW channel.
Not consistently working Visual Studio. 2015. Do not work emulators, the XAML constructor. This problem will also be corrected with the update on the SLOW channel.

Well, successful update! And if you are going to wait for images, they will be laid out in a few hours!

Write your reviews about the new assembly in the comments. You can discuss it both in the VKontakte group and on our forum.

Download / download:

Windows 10 Build 10049 Pro russian 64-bit:

Windows 10 Build 10049 Pro Russian 32-Bit:

Windows 10 Build 10049 Pro english 64-bit:

Windows 10 Build 10049 Pro english 32-bit:

Attention! File size is really less than usual. This is due to the fact that it was converted to receiving an image not with install.wim, but with install.esd. That is exactly the difference in size. Installation with image data is carried out in normal mode, which was checked by portal administrators.

Found a mistake? Highlight it and press Ctrl + Enter

thecommunity.ru.

Windows installation program failed to configure Windows to work with equipment

When restoring the system to a new HDD discs Recovery Architecture and sections content is restored to the factory state. But at the moment - the start of installing Windows (preparing Windows to the first launch) occurs:

Installing equipment -100%

MESSAGE:

"Windows installation program failed to configure Windows to work with the equipment of this computer."

I click OK, the computer reboots, the installation starts again ...

and again everything stops,

MESSAGE:

"Failed to complete the installation process. To install Windows, restart the installation program. " I click OK, setting the installation again

and again everything stops

MESSAGE:

"Failed to complete the installation process. To install Windows, restart the installation program. "

All you need to do when the message "Windows installation program" could not configure Windows to work with the equipment of this computer "or" failed to complete the installation process. To install Windows, restart the installation program "So it does not press the" OK "button

But a black window with a command line will appear to press the keyboard shortcut. It must be registered in it to the executive file and run it. File is called msoobe.exe and the full path to it bucks look like:

C: \\ Windows \\ System32 \\ Oobe \\ msoobe.exe

When installing on the laptop, you must press the FN key

A window should appear with the proposal to enter the name. account.

P.S. By the way, everything will work if your computer really supports Windows 7, although most likely it is.

One of the frequent problems windows users 10 - message "We could not configure Windows Updates. Cancel changes "or" We could not complete the updates. Cancel changes. Do not turn off the computer »After rebooting the computer to complete the installation of updates.

In this instruction - in detail how to correct the error and install updates in this situation. different ways. If you have already tried a lot, such as the methods associated with cleaning the SoftwaredistRibution folder or the Windows 10 update diagnostics of Windows 10 update, below in the manual you can find and additional, little where the problem solving options described.

Note: If you saw the message "We could not complete the updates. Cancel changes. Do not turn off the computer "and watch it in currently time, while the computer reboots and shows the same mistake again and do not know what to do - do not panic, but wait: perhaps it is a normal cancellation of updates that can occur with multiple reboots and even a few hours, especially on laptops with slow HDD . Most likely, as a result, you will fall in Windows 10 with canceled changes.

Clearing SoftwaredistRibution folder (Windows 10 update cache)

All Windows 10 updates are loaded into the folder. C: \\ Windows \\ SoftWaredistrationTribution \\ DOWNLOAD and in most cases cleaning this folder or renaming the folder SoftWaredistribution. (So \u200b\u200bthat the OS creates a new and upgrade) allows you to correct the error in question.

Two scenarios are possible: After cancellation of the changes, the system is loaded normally or the computer restarts endlessly, and you all the time you see a message that you failed to configure or complete Windows 10 updates.

In the first case, the steps to solve the problem will be as follows:

In the second case, when a computer or laptop is constantly rebooted and canceled changes does not complete, you can do as follows:

After that, you can log in - update and security and check whether updates will be installed without errors. If Windows 10 is updated, not reporting that you failed to configure updates or complete them, go to the folder C: \\ Windows And delete the folder SoftWaredistribution.old. From there.

Windows 10 Upgrades Diagnostics

Windows 10 has built-in diagnostic tools to correct update problems. Just as in the previous case, two situations may occur: the system is loaded or Windows 10 is constantly rebooted, all the time reporting that it was not possible to complete the update setting.

In the first case, follow these steps:

In the second situation more difficult:

Run items 1-3 from the section about cleaning the update cache (get to the command line in the recovery environment running with boot flash drive or disk).
bCDEDIT / SET (DEFAULT) SafeBoot Minimal
Restart the computer S. hard disk. It should be opened safe mode.
In safe mode in command line Enter the following commands in order (each of them starts the troubleshooting tool, first go first, then the second one).
mSDT / ID BITSDIAGNOSTIC
mSDT / ID WindowsPedAdiagnostic
Turn off the secure mode command: bCDEDIT / DELETEVALUE (DEFAULT) SAFEBOOT
Restart the computer.

Perhaps it will work. But, if on the second scenario (cyclic reboot) to date failed to correct the problem, then it is likely to be used reset Windows 10 (This can be done with data saving, booting from the boot flash drive or disk).

Could not complete Windows 10 updates due to duplicate user profiles

Another, little where the problem described the problem "could not complete the updates. Cancel changes. Do not turn off the computer »In Windows 10, problems with user profiles. How to eliminate it (important: the fact that below - under its responsibility, you can potentially spoil something):

Upon completion of the procedure, restart the computer and again try installing Windows 10 updates.

Additional ways to correct the error

If all the proposed solutions to the cancellation problem are due to the fact that you could not configure or complete Windows 10 updates were not successful, options remain not so much:

Perform integrity check system files Windows 10.
Try to execute Clear Download Windows 10, Delete Content SoftWaredistribution \\ Download., re-download updates and run them.
Delete third-party antivirus, Reload the computer (you need to end the deletion), install updates.
Try long way By restoration source state Windows update components, described on the official Microsoft website

And finally, in the case when nothing helps, it is possible that the optimal option becomes automatic reinstalling Windows 10 (reset) with data saving.

Somewhere a month ago, a familiar brought a laptop with a broken operating system. I did not ask the superfluous question about what exactly happened to the laptop, but he did not want to load. Unfortunately I can not remember the mistake. Since the data on the hard disk was not needed, "and honestly there was nothing except the operating system," I connected uSB flash drive, and started installing the operating system.

Installing the Windows 7 operating system passed in a calm and usual mode, but at the last stage (100% installation) suddenly hooked an error: Windows installation program failed to configure Windows to work with the equipment of this computer (unfortunately did not do)

I did not give this error much value, and the computer performed a reboot. As it turned out a little later, Windows 7 refused to load.

Once again I had to reinstall the system, but alas before the conclusion I get the same error "Windows installation program failed to configure Windows to work with the equipment of this computer.".

First decision

During installation of Windows as soon as jumped out this error, do not press the "Continue" button. Click on the keyboard shortcut the Shift + F10 keys. You will open a window with a command line.

We need to go to the folder C: / Windows / System32 / Oobe /and launch the application msoobe.exe.. To switch between folders we use the command CD. Just perform all actions as in the picture, and you start setting up windows.

CD /
- CD Windows / System32 / Oobe / (use the reverse slash instead
- msoobe.exe.

Fill in the fields and can in conventional method Complete Windows installation.

Second decision

At that time I did not know that the error could be related to the BIOS settings, but I just encountered a similar problem for a long time. Before boot windows I have

One of the frequent problems of Windows 10 users is a message "We could not configure Windows Updates. Cancel changes "or" We could not complete the updates. Cancel changes. Do not turn off the computer »After rebooting the computer to complete the installation of updates.

In the first case, follow these steps:

In the second situation more difficult:

Run items 1-3 from the section for cleaning the update cache (get to the command line in the recovery environment running from the boot flash drive or disk).
bCDEDIT / SET (DEFAULT) SafeBoot Minimal
Restart the computer from the hard disk. A secure mode will be opened.
In safe mode, in the command prompt, enter the following commands in order (each of them will start the troubleshooting tool, first, first, then - second).
mSDT / ID BITSDIAGNOSTIC
mSDT / ID WindowsPedAdiagnostic
Turn off the secure mode command: bCDEDIT / DELETEVALUE (DEFAULT) SAFEBOOT
Restart the computer.

Perhaps it will work. But, if, on the second scenario (cyclic reboot), no time to correct the problem, then it is likely to use the reset of Windows 10 (this can be done with data saving, booting from the boot flash drive or disk). Read more - (see the last of the described methods).

Could not complete Windows 10 updates due to duplicate user profiles

Upon completion of the procedure, restart the computer and again try installing Windows 10 updates.

Additional ways to correct the error

If all the proposed solutions to the cancellation problem are due to the fact that you could not configure or complete Windows 10 updates were not successful, options remain not so much:

Try, delete content SoftWaredistribution \\ Download., re-download updates and run them.
Delete third-party antivirus, restart the computer (you need to delete), install updates.
Maybe, helpful information There is a separate article :.
Try a long way to restore the original state of the Windows update center components, is described on the official Microsoft website

Finally, in the case when nothing helps, it is possible that the optimal option becomes.