Windows 7 installation cannot be completed. Windows 7 installation process could not be completed

Telephone

Some Windows users like to reinstall the operating system when they are unable to cope with the situation and find a solution to the problem on their own. For example, if an unsuccessful attempt to deploy an update resulted in the computer going into a cyclic restart mode, followed by the message “We were unable to configure Windows updates. Undoing changes in progress ”or“ We were unable to complete the updates. Cancellation of changes. Don't turn off your computer. " The legs of one and the other are still growing with Windows 7 and they still cannot be chopped off in the top ten. But it is still possible to overcome them, and for this it is not at all necessary to demolish the system and install it again. Enough to read this manual, which describes what to do if the OS was unable to install the Windows 10 update.

Clean up SoftwareDistribution folder with Windows 10 updates

Before installing updates, the system downloads them to a separate directory. In most cases, clearing or moving it helps to overcome the mentioned errors. This can be done both from under the system (if you have access to it), and using a USB drive with files for windows installations 10.

Clearing the SoftwareDistribution folder in

This method is suitable if you managed to log in.

Using a bootable Windows 10 USB stick to clean up SoftwareDistribution

If you cannot get into the system, then you will have to use the drive with files for installation to clear the folder operating system... there are several ways, but one way or another you will need a second computer with a stable operating system.

After creation boot drive do the following:

Fixing the error Failed to complete Windows update by Update Diagnostics

As you probably know, Windows has its own set of diagnostic and troubleshooting tools. You've probably stumbled upon it a lot, but never used it. Now you have a great opportunity to use it to solve a problem.

If you can't get into the system, then you should try another option.

Remove Duplicate Profile to Fix Windows Updates Failed to Complete Error

In some cases, the Windows 10 update installation process can fail due to a duplicate user account. Eliminate this problem the registry editor will help you. Be careful and do not touch anything unnecessary so as not to harm the system.

In the absence of any improvement after applying all the prescribed methods, you can try with saving the data.

One of the common problems windows users 10 - message “We were unable to configure Windows updates. Undoing changes in progress ”or“ We were unable to complete the updates. Cancellation of changes. Do not turn off your computer "after restarting your computer to finish installing updates.

Windows 10 has built-in diagnostics for fixing update problems. Just as in the previous case, two situations may arise: the system boots or Windows 10 constantly reboots, all the time reporting that it was not possible to complete the update configuration.

In the first case, follow these steps:

In the second situation, it is more difficult:

Follow steps 1-3 from the section on clearing the update cache (get to the command line in the recovery environment launched with bootable flash drive or disk).
bcdedit / set (default) safeboot minimal
Restart your computer with hard disk... Should open safe mode.
Safe mode in command line Enter the following commands in order (each will run the troubleshooter, go through one first, then the second).
msdt / id BitsDiagnostic
msdt / id WindowsUpdateDiagnostic
Disable safe mode with the command: bcdedit / deletevalue (default) safeboot
Restart your computer.

Perhaps it will work. But, if the second scenario (cyclic restart) has not been able to fix the problem by now, then you may have to use reset windows 10 (this can be done while saving data by booting from a bootable USB flash drive or disk). More details - (see the last of the described methods).

Windows 10 updates failed to complete due to duplicate user profiles

There is one more, little-where described cause of the problem "Failed to complete updates. Cancellation of changes. Do not turn off your computer "in Windows 10 - problems with user profiles. How to fix it (important: what is below is on your own responsibility, you can potentially spoil something):

After completing the procedure, restart your computer and try installing Windows 10 updates again.

Additional ways to fix the error

If all the proposed solutions to the problem of canceling changes due to the fact that it was not possible to configure or complete the Windows 10 updates were not successful, there are not many options left:

Try it, delete content SoftwareDistribution \\ Download, re-download the updates and start installing them.
Delete third party antivirus, restart the computer (required for the uninstallation to complete), install updates.
Maybe, useful information can be found in a separate article:.
Try long way to restore initial state Windows Update components described on the official Microsoft website

And finally, in the case when all else fails, it may be the best option.

You are trying to install an update in Windows 10, but a notification is displayed that it could not be completed, after the system starts undoing the changes. Let's learn more about how to fix this error.

Errors that cannot complete the installation are not new to users. Many have encountered an error in Windows 7, in which the system notifies that the updates could not be completed, and then the process of undoing the changes starts. Since some time, more and more users have been observing this problem in Windows 10.

The system downloads the updates correctly and displays the information that they are ready to be installed. If you ignore the installation, then after a while the OS itself "throws out" a notification that Windows should be updated, offering to restart the computer to complete the operation.

And this is where the problem begins. The update is theoretically installed, but at some point a warning about a possible failure appears. A notification "We were unable to complete the updates" appears, and below the screen displays "Canceling changes" - Windows 10 begins the uninstall procedure and rolls back the system to the state before it was installed. And so over and over again, with each attempt to update the OS. How to fix?

Method number 1. Windows Update Troubleshooter

To get started, you can use the tool automatic elimination problems in Windows 10. This is an official tool that can be downloaded from the Microsoft website. The utility diagnoses the system area for faults, and then tries to solve them using basic methods. The effectiveness may be less or more, depending on the problem, but it is always worth giving this program a chance when we start solving problems.

Download troubleshooting tool

Once downloaded, launch the utility and follow the instructions on the screen. The program will automatically search for problems and then try to fix them.

If a notification appears that "" has been restored, you can try updating the system.

Method number 2. Clearing the SoftwareDistribution folder

The SoftwareDistribution folder contains update installers. The problem may be due to the fact that they are damaged or a compatibility error. Therefore, it is worth deleting the contents of this folder and restarting the service.

To be able to do this, you must temporarily stop the service, otherwise file deletion will be blocked.

Press the Win + R keyboard shortcut and enter the command:

Find the service in the list, right-click on it and select "Stop". The service will be suspended.

Press the Win + R keys again at the same time, enter the path to the directory below and press Enter:

C: \\ Windows \\ SoftwareDistribution

All contents of the SoftwareDistribution directory must be deleted - it must remain empty.

After deleting all files from the folder, open the list of services again (enter the command "services.msc" in the run window), find, right-click on it and select "Run".

Now try updating your system.

Those users who independently downloaded the official OS installation image windows systems 10 are of course familiar with special utility Media Creation Tool. It is a proprietary Microsoft tool for creating bootable media to install and update the operating system. But sometimes you may have a problem launching the Media Creation Tool. For example, the error "Setup was unable to start correctly, please restart your computer." Or the application does not start at all. There may be several reasons for this phenomenon.

The most common reason is that the Media Creation Tool does not work due to the fact that it is incorrectly recognized by your security system and blocks any suspicious activity. Therefore, it is worth starting with what to disable antivirus program and a firewall (firewall).

Checking the work of Media Creation Tool. Did not help? Go ahead. Next possible reason - Your account does not have enough rights to run the program. Try right-clicking on its icon and in the menu that appears, select "Run as Administrator". Alternatively, you can try to create another account windows entry with administrative rights and try to see if the utility will start now.

The next reason why Media Creation Tool does not work is problems with local area network... Try the following. Run Command Prompt as Administrator. Then enter the following commands in turn: ipconfig / release Release the IP address if it is obtained from the DHCP server automatically.

Then: ipconfig / renew This will renew our IP address.

And finally, clear the DNS cache: ipconfig / flushdns

Now you need to check that you have access to the Internet and then check the work of the Media Creation Tool.

Another way that sometimes it also turns out to fix the problem when starting the Media Creation Tool is to clean up temporary system files. To do this, you need in the address bar windows explorer register this address:% TEMP% Press the "Enter" key. The folder where the temporary files are stored will open softwarethat works or has worked on the system. It looks something like this:

We completely clear its contents and reboot. Well, if the Media Creation Tool does not work after that, then the only way out is to download the installation image and create boot disk on another computer, and then go to this one and reinstall the OS.

set-os.ru

Windows 10 Technical Preview Build 10049 Available Now!

And again we get a new build on the Fast update channel! The company has indeed moved to a faster update scheme. The new build is numbered 10049 and is available for download from Windows Update.

Recall that the previous build was numbered 10041, which means that the current build received only minor changes and improvements, after all, just over a week has passed. But, this build includes the new Spartan browser for the first time!

This assembly, as usual, is not without errors. Well-known ones can be noted:

After logging in, you can see blue screeninstead of the desktop. Lock the computer with the hardware button, or press the Win + L key combination and re-enter the system. You can also try opening Task Manager with the Ctrl + Shift + Esc keyboard shortcut.
Checking for new messages in Outlook does not work
It is impossible to run on this assembly virtual machines Hyper-V. This bug will be fixed with an update on the Slow channel.
Doesn't work stably Visual Studio 2015. Emulators don't work, XAML designer. This issue will also be fixed with an update on the Slow channel.

Well, happy update! And if you are going to wait for the images, they will be posted in a few hours!

Write your feedback on the new build in the comments. You can discuss it both in the VKontakte group and on our forum.

Download / Download:

Windows 10 Build 10049 Pro Russian 64-bit:

Windows 10 Build 10049 Pro Russian 32-bit:

Windows 10 Build 10049 Pro English 64-bit:

Windows 10 Build 10049 Pro English 32-bit:

Attention! The files are actually smaller than usual. This is due to the fact that they converted to obtain an image not from install.wim, but from install.esd. This is the difference in size. Installation from these images is carried out as usual, which was verified by the portal administrators.

Found a bug? Select it and press Ctrl + Enter

thecommunity.ru

Windows Setup was unable to configure Windows to work with hardware

When restoring the system to a new one HDD disks restore the architecture and content of the partitions are restored to the factory state. But at the moment - the beginning of the installation of Windows (preparing Windows for the first start), the following happens:

Installation of equipment -100%

MESSAGE:

"Windows Setup was unable to configure Windows to work with the hardware on this computer."

I click OK, the computer restarts, the installation starts again ...

and again everything stops,

MESSAGE:

The installation process could not be completed. To install Windows, restart the installer. " Click OK, the installation starts again

and again everything stops

MESSAGE:

The installation process could not be completed. To install Windows, restart the installer. "

All you need to do when you see the message “Windows Setup could not configure Windows to work with the hardware on this computer” or “The installation process could not be completed. To install Windows, restart the installer "so do not click the" OK "button

But press the key combination will appear a black window with a command line. In it, you need to register the path to the executive file and run it. The file is called msoobe.exe and the full path to it will look like:

C: \\ Windows \\ System32 \\ oobe \\ msoobe.exe

When installing on a laptop, you must also press the FN key

A window should appear asking you to enter a name account.

P.S. By the way, everything will work if your computer really supports Windows 7, although most likely it is.

One of the common problems for Windows 10 users is the message “We were unable to configure Windows updates. Undoing changes in progress ”or“ We were unable to complete the updates. Cancellation of changes. Do not turn off your computer "after restarting your computer to finish installing updates.

This manual provides details on how to fix the error and install updates in this situation. different ways... If you have already tried a lot, for example, methods related to clearing the SoftwareDistribution folder or diagnosing problems with Windows 10 Update, below in the guide you can find additional, rarely described solutions to the problem.

Note: if you see the message “We were unable to complete the updates. Cancellation of changes. Do not turn off the computer "and watch it in this moment time, while the computer restarts and again shows the same error and you do not know what to do - do not panic, but wait: perhaps this is a normal cancellation of updates, which can occur with several reboots and even several hours, especially on laptops with slow hdd ... You will most likely end up in Windows 10 with your changes reverted.

Clearing the SoftwareDistribution folder (Windows 10 update cache)

All Windows 10 updates are downloaded to a folder C: \\ Windows \\ SoftwareDistribution \\ Download and in most cases clearing this folder or renaming the folder SoftwareDistribution (in order for the OS to create a new one and download updates) allows you to fix the error in question.

Two scenarios are possible: after canceling the changes, the system boots normally, or the computer restarts indefinitely, and you always see a message stating that Windows 10 updates could not be configured or completed.

In the first case, the steps to solve the problem will be as follows:

In the second case, when the computer or laptop is constantly rebooting and the undoing of changes does not complete, you can proceed as follows:

After that, you can go to Options - Update & Security and check if the updates will download and install without errors. If Windows 10 updates without reporting that updates could not be configured or completed, go to the folder C: \\ Windows and delete the folder SoftwareDistribution.old from there.

Troubleshooting Windows Update 10 issues

In the first case, follow these steps:

In the second situation, it is more difficult:

Follow steps 1-3 from the section on clearing the update cache (get to the command line in the recovery environment launched from a bootable USB flash drive or disk).
bcdedit / set (default) safeboot minimal
Reboot your computer from the hard drive. Safe mode should open.
In Safe Mode, at the Command Prompt, enter the following commands in order (each will launch the troubleshooter, go through one first, then the second).
msdt / id BitsDiagnostic
msdt / id WindowsUpdateDiagnostic
Disable safe mode with the command: bcdedit / deletevalue (default) safeboot
Restart your computer.

Maybe it will work. But, if the second scenario (cyclic reboot) has not been able to fix the problem by now, then you will probably have to use Windows 10 reset (this can be done while saving data by booting from a bootable USB flash drive or disk).

Windows 10 updates failed to complete due to duplicate user profiles

After completing the procedure, restart your computer and try installing Windows 10 updates again.

Additional ways to fix the error

Check integrity system files Windows 10.
Try to run clean boot Windows 10, delete content SoftwareDistribution \\ Download, re-download the updates and start installing them.
Remove third-party antivirus, restart your computer (required for the uninstallation to complete), install updates.
Try the long way to restore the original state of Windows Update components, described on the official Microsoft website

And finally, in the event that nothing helps, it may be the best option to perform an automatic reinstalling Windows 10 (reset) with data saved.