TP LINK TL WR841N Reset settings. Reset TP-LINK router - how to return the factory settings? Why make reset settings on a Wi-Fi router

the Internet

There are cases when, with incorrect operation of the router, it is necessary to change the parameters or configuration in the administrative panel of the device. However, access to it is lost. For example, you changed the standard entry data (factory Admin / Admin setting) and forgotten new values. Also on some models, access to the control panel can be blocked after multiple incorrect entry of this data (3-5 times in a row). Although it allows you to protect the admin panel from hacking by selecting a password, but sometimes such excessive vigilance prevents the owner of the router itself. Reset settings in this case will be the best solution.

No less common cause to restore the standard parameters of the device is to change its owner, or the desire to set up everything from scratch. If the previous router configuration does not work on your network or you want to reset the password for the entry, a reasonable solution will be the restoration of the factory setting.

Another case when you want to reset the data before the initial values \u200b\u200bis the inability to find the control panel page. All manufacturers of these devices are laid in the firmware universal address to enter the device configuration page. It does not depend on the local IP, which is used by the router, and is executed using a separate Internet address. For example, a universal address for Wi-Fi routers TP-LINK: TPLinkLogin.net. If it also does not work, and you cannot connect to the network to clarify the IP address of the router by software methods, you will help reset the settings.

Tip! Do not hurry to restore the factory parameters with any difficulties that have arisen. Often, a simple restart of the device can help. To do this, use the button on the router, or turn it off from the network and turn on again.

Reset settings using the button

This method is the easiest way, because it does not require the entry into the control panel. To reset all the router parameters, connect the device to the network, locate the "Reset" button on the rear panel and click it. At various models and stamps, only the duration of pressing the button and its location may differ. On most devices, hold the button in the pressed state more than 10 seconds. When the data reset will be executed, the device will signal simultaneously flashing LEDs located on the front panel.

For information! In addition to the light notation, routers can report successful resetting of settings and other methods. For example, by a one-time turning on the first LED to the last.

As for the type of the button - it happens the outer and inner (recessed into the body of the machine). The location of the button inside the case is necessary so that the data reset is not completed by accident, when connecting cables into ports. And if the outer button can be pressing with a finger, then a thin oblong item will need for pressing the internal button. The most optimal choice is a match or toothpick, but other items are used: clip, ampoule from ballpoint handles, nail, needle.

Make sure that the router reset is successfully completed, you can if you enter its control panel with standard account data data (ADMIN / ADMIN). After that, you can configure the router again. Most models provide a fast installation function that allows 3-4 steps to set the basic Internet connection settings, Wi-Fi network and access protection. A more subtle configuration is performed at the following steps when the connection is already installed.

Tip! When configuring the device, do not forget to enable Wi-Fi encryption and enter a new wireless network key. Recommended method: WPA2-PSK, the key must contain letters, numbers and characters. Such protection will help protect the network from the hacking method by selecting a password in dictionary.

On some routers, the reset button of the settings is on the bottom panel. If you have a back of the device, next to the ports, you cannot find the desired button, it is recommended to flip the router. In addition to the standard name "RESET", it may be called "Restore Factory Settings" (Restore the factory settings).

Reset settings in the control panel

Reset parameters in the admin panel is made only if you have access to it. For example, to reset the settings on the TP-LINK router, use the "System Tools -\u003e Factory Settings" menu. After clicking on the "Restore" button and the command confirmation will be rebooted.

In devices of various models, reset the settings is almost the same. And although the specific menu item depends on the device version, even if you have a non-standard firmware, data reset in most cases is in one of the last menu items.

Standard menu items to reset the parameters to factory on different brands of routers:

TP-LINK.: "System Tools -\u003e Factory Settings -\u003e Restore";
ASUS.: "Administration -\u003e Setup Management -\u003e Factory Settings -\u003e Restore";
D-Link: "System -\u003e Restore Factory Settings";
Huawei.: "Service -\u003e Device Management -\u003e Restore Factory Parameters";
Zyxel: "Parameters -\u003e return to factory settings";
Upvel.: "Administration -\u003e Manage Parameters -\u003e Restoration of factory settings."

The exact path may vary in firmware, but when searching for the desired partition, you should focus on this data. As a rule, the reset of the router settings is not performed without confirmation of the command. In some models, even the password of the administrator account is repeatedly entered. So accidentally delete the data you will not work.

Educational Video: Reset Routher Settings on the example of TP Link WR 740

To browse the password from Waifa is bad, but to know it is simpler simple. But if you forgot the password from the router, it can become a serious problem, especially if you have already managed to change the standard password from the router and forget. But this problem is solvable, so do not rush to despair.

Use the factory password

If you suddenly do not know, you can enter the web interface of the router by entering the Internet browser in the address bar 192.168.1.1 (for models from TP-Link - 192.168.0.1).

And the login, and the password installed by the manufacturer, as a rule, are the word Admin, but it does not always happen. On the RouterPasswords.com website you can familiarize yourself with the full list of standard logins and passwords for routers of any manufacturer and any specific model. Although the popular TP-LINK brand in the base of manufacturers, there is about two hundred, for some reason it does not appear.

If on this resource you did not find data for your model, look at the user manual, because the login with the password manufacturer may indicate there (either on the sticker on the bottom of the device).

Reset

If the standard password has long changed, the easiest way to get access to the device is to reset the settings to the factory. As you understand, configure your Wi-Fi router after that will have to be from scratch, so do not use this method, without being confident that you can independently set all the settings. If you have not yet changed my mind to reset, then you look at the device's small button on the case of the machine, press it and do not release it within 10-15 seconds. Now you can enter the router interface using the standard login password (read above).

Helpful advice: By resetting the router settings, you can set a new login-password bundle. Login You can leave the standard (Admin) or specify the name of the PC user account instead. And instead of a password, you can use the serial number of the router or its MAC address. This data is indicated on the identification sticker under the bottom of the device, so that you need to remember or write anymore. Forgot your password - just take a look at the sticker.

How to change the password from the router

To change the password of the router, you need to go to the appropriate section of the menu. However, the menu interface in devices of different manufacturers looks different. Consider some popular models of different brands:

RouterPassView program

It is only a sense to use this way only if you saved the device configuration file in advance. After buying and setting up the router, it is worth it first of the same queue, since this file will help if you restore not only the password, but also all other router settings, if they suddenly drop for one reason or another.

You can save the configuration file in the router settings. You can find it at different items menu settings, depending on the router model you use. So, for the Huawei HG8245H device, this path is as follows: The System Tools tab from above - the Configuration File string on the left - the SAVE button.

If you have a saved device configuration file, download the RouterPassView program, which will help pull out the login and password from the web interface of your router from the data file.

It's easy to use it: select the File menu item, then click Open and select the configuration file or drag it to the program window.

The more common model you have, the faster you can restore the necessary information. True, a list of supported routers is limited to just a few dozen models, most of which are of TP-Link and D-Link manufacturers.

Router Password Kracker utility

The whole charm of this software product is that it does not require the presence of a saved file with the router configuration, which can be obtained, just knowing the password from the device. It is enough to have only connected to the router (Wi-Fi or wired - no matter) and that's it. Just enter in the program window to the desired IP router fields, login and press the Start Crack button.

However, this utility has a minus: it uses a complete extinguishing method (T. Brute Force), so that the search for a password can be very tightened. But if it is not possible to restore the forgotten data in another, you will have to be patient.

To completely reset the router settings enough:

turn on the router and wait for it to download (wait 2 min)
find on the back of the device a special hole, inside there is a mini button RESET
take something thin, for example, toothpick or dismissed clip, and click on the button in the hole
must go out, blink or swing all the light bulbs on the front panel, or just wait 15 seconds
router will boot with factory settings

The password and settings of the Wi-Fi or ADSL router will be discarded by default.

Hardware and software reset

Settings can be reset hardware and software methods.

Hardware - using the RESET button (WPS). This method is universal for all Wi Fi Routers. This is the only option if:

you do not know / Forgot your login and / or password to enter the router settings
you do not know or changed and forgot the IP address of the router
after "some" settings, it does not allow log in to the web interface

The only minus - you need to have access to the router.

Software is via the web interface of the router

Those. Using its built-in menu for setting up. Conveniently, if you can enter the web interface and you know the username / password. This method is suitable for cases when it does not work or maybe.

To enter the home router settings you need to be connected via cable or Wi-Fi to a computer or laptop. The Internet is not needed for this. Then in the address bar you need to type its IP address, by default it is:

192.168.0.1

192.168.1.1

The IP address, login and password for entering the administration can be printed on the router at the bottom:

Also, these are the parameters that will be applied after reset, both software and hardware. In most cases:

password: Admin.

We enter the password and fall into the control panel.

Different producers it is different, but the essence is the same.

How to Reset Password on TP-Link Routers

We go to the menu " System Tools -\u003e Factory Defaults"And press the" Reset "button. Reboot, ready:

Reset Password and Settings on D-Link Routers

We pass along the path menu " Maintenance -\u003e Save and Restore -\u003e Restore Device" Click the button:

Or menu " Management -\u003e Restore Default -\u003e Restore Default Settings»

ASUS devices

Also very popular devices. You need to go to the menu " Settings Management -\u003e Administration -\u003e Factory Settings -\u003e Restore»:

Drop the zyxel routers settings

If you are a happy owner of such a device, you will probably see a similar admin panel:

Pass " System -\u003e Configuration -\u003e Reset" After rebooting, all options come to a default state.

That's all

Before resetting the settings, I advise you to rewrite the current network settings in the text file, if you understand what I mean. These are the parameters that were introduced by the Internet Provider. And you did everything? Write comments.

Good day Dear blog readers Website. Recently, I began to face a very often with a phenomenon when a person using a wireless WiFi router in his apartment is simply forgetting the password from him, which further leads to problems with the connection. Either after the expiration of time and, in this case, many believe that a reboot should help. If the user is not quite competent then, most likely he will ask for help to a computer master. That for a certain amount will solve all problems. Today I will try to tell how to reset the router to the factory settings yourself.

There are several ways to reset the router settings. For most models, they are almost the same, since external switches are on all models. And the interface of the internal program is very similar.

How to reset the router to factory settings using external switches

Most have a standard set of switches on the back or side. In fact, it is: Power on / off buttons, WiFi turn on / off, WPS (automatic configuration of a mobile device connection to the router) and the RESET button "Restart" (here it is just necessary for us).

In order to reset the router settings to the factory it must be turned on. Otherwise, the internal program will not be able to determine what any actions were made.

I would like to celebrate one nuance. There are such models of routers where one switch carries several functions. For example, its short-term pressing includes the WPS function, and the long-lasting reboot.

The images below present two types of buttons. In the first case, it has a double purpose and an external location, and its press is carried out with a finger.

In the second case, in order to reset the router to the original state, it is necessary to use any subtle item. The fact is that the button is reset to protect the device from a random reboot. A broken clip can be searched, a needle or as shown in the figure below it is enough to use a pencil.

To reset, you need to click the above button and keep not allowing within ten seconds. The indicator that the router restarts will be a one-time highlighting of all indicators on the front panel. Then the sequential turn on all device modules.

How to reset the router settings through the inner firmware

This method is used very rarely, since the easiest method is just described above. Reset the router to the factory settings through the firmware can only if you are connected to the router itself. Such a need appears when at the time of the setup you made incorrect actions. Below I will describe how to do this on the example of two different manufacturers of ASUS and TP-LINK routers. The fact is that at the moment the device of these firms are the most popular. If you have a router of another company, then do not despair, most interfaces are intuitive. And after reading this article, you can reset the settings on any device.

How to lose a router asus

Since these actions are similar for all models of ASUS manufacturer devices, we will not consider each model separately, and consider a generalized description.

First you need to get into the inner firmware WiFi router. I will not sign all the subtleties here, since more detailed information can be obtained from the article we assume that you have read the above article and went into the inner menu. Now it is worth paying attention to the lowest section on the left "Administration". Opening it at the top of the screen, select the "Settings" tab and click "Restore" opposite the factory settings.

How to reset TP-LINK router settings

In fact, the principle is very similar to the previous manufacturer. The only thing that is different is the interface. In order to get into the Handbook, I advise you to read the article where it is described in an affordable language. After you have fallen into the internal program, we safely go to the "System Settings" section and open the "Factory Settings" tab. After that, it is enough to click the "Restore" button and confirm the actions performed.

If you hit the menu of your wireless device, then I advise you to check and update the firmware for the completeness. These actions will eliminate certain errors and optimize the operation of the device. About how to do it in a separate on my blog pages.

Well, as I promised nothing difficult to reset the router settings. This will be able to figure out even a novice user. However, if you have any questions, I am always ready to help you. I propose on the example of the TP-LINK TL-WR841N router to figure out how using external switches to reset the router to factory settings.

Wireless networks were deeply entered into our life, and the Wi-Fi router can be seen in almost every home. However, as with other home appliances, many users in using the router are limited to on / off functions. Although you know how to install and how to reset the router settings is really useful.

Methods for resetting parameters

In each modern router there are two options for returning to the initial state:

Use a special "Reset" button that is on the housing.
Relief through the device parameters.

So, let's analyze both ways how to reset the router to the factory settings.

As a rule, the "Reset" button on the router is recessed into the housing: to press it, you need a needle, toothpick or thin needle.

To reset the router settings, you need to press the "Reset" button and continue to hold it about 10-20 seconds (with the device turned on). When you click, see the power indicator - it should blink or go out, depending on the router model.

The "Reset" button on the router has another essential function: using it, you can start the flashing mode if the router is not reset to the factory settings, because there is no possibility to enter its parameters.

In this case, we carry out the following:

Disconnect the router.
Click on the "Reset" button and hold it about 15 seconds.
Then, without releasing the "reset", turn on the router - insert the power supply into the outlet.
Next, simply connect to the device using a cable.
Run your favorite browser to the PC and in the address bar, you will prescribe the address of the router; As a rule, it is 192.168.0.1 or 192.168.1.1. Sometimes manufacturers use other addresses. It is possible to see the factory sticker, in the instructions or the box itself, in which the gadget was sold.
Now it remains only to specify the path to the firmware, and then confirm the action.

After the firmware, the router will have to configure again. So the actions described can be considered one of the options, how to restore the router settings before the initial state with the firmware update.

Zeroing through parameters

Reset the router settings to the factory through the parameters is performed quite simple. We will consider further actions on the example of D-Link DIR 615.

But before proceeding to the question, how to reset the Wi-Fi settings of the router, let's find out how to enter its parameters. Where to watch the IP address of the device, you already know.

There you will find a login and password to enter. By default, the manufacturer sets the ADMIN login and the Admin password. If you changed these meanings, you know only you.

We recognize the IP router

There is an alternative way:

To begin with, connect to the router (for - or with cable 45).
After that, on the computer, run the command line.
We prescribe in it the ipconfig command.

Below the parameters of your network will open. Here you just need to find the "Main Gateway" string - this is the IP address you need. Remember it, and even better - rewrite.

Now go to the main question: how to return the router to the factory settings.

How to reset the router settings: video

Instruction

We start the browser, we prescribe in the address bar - the router, I have it 192.168.0.1.
When the page is loaded, you will see that you need to enter a login and password.

As a rule, then the parameters immediately open. In my case, you still need to click the "Advanced Settings" button.

Now we find the section "System Settings" or "System", or, as in my case, "configurations".

Here you see the "Factory Settings" button. Click it and wait for the end of the procedure.

Now you know how to reset the router settings. The above instruction will help you navigate in any interface, regardless of the Access point model. Often people ask a question that will be if you reset the router settings. The answer is simple: you have to re-configure the device.