How to set up mms beeline messages on your phone. Connecting and configuring mms to beeline

Popular mobile service MMS Beeline opens up an excellent opportunity to send instant multimedia messages to other subscribers, which contain: photos, texts, videos, as well as various audio recordings. The allowed size of files that can be sent is 500 kilobytes, and the limit for text characters is 1000 characters or less. MMS can be sent to both phone numbers and email... This procedure is available not only in the Russian Federation, but also outside its territory. The payment for the transmission of one message is directly dependent on the tariff used and is approximately equal to 7.95 rubles.

The transmission of MMS Beeline when using the Internet was not very long ago blocked, therefore, in order to gain access to communicate with other subscribers using MMS, you will need to connect and configure this service on a mobile phone.

The procedure for connecting MMS to Beeline

In order to clarify information on connecting the MMS service, you need to call the support service by phone 8-800-700-0611 or go to your personal account, where you can see the list of connected services. In that situation, if this option is not enabled, then you can use any of the options to activate it:

• Dial on the phone and then send the command *110*181# a call, as a result of which a package of three services will be connected, among which there is an opportunity to send and receive MMS.
• Visit your personal account on the Beeline website, where you need to open the "Available" list in the "Services" menu, in which you select the MMS connection item. As a result of these actions, it is possible to connect the service via mobile application from the Beeline operator for Android, as well as other platforms.
• Ask a representative in any of the Beeline offices to connect this service absolutely free.

Configuring MMS Beeline in automatic mode

After connecting the MMC, you should make the correct setting of the option in order to open access for reading and sending messages. For these purposes, the following actions will be required:

• Click on the link: MMC Beeline settings to go to the menu for providing MMC settings in automatic mode for a specific phone model.
• In the list that opens, select the required phone model or in manual mode type its name.
• Click on "MMS" and then on "Yes, go to MMS settings".
• If there is an automatic setting, you need to dial the phone number in the window and click on special button "Send settings". In that situation, if setting is possible only in manual mode, then you should read the instructions for a specific phone model and then follow it sequentially (for different models actions are great).

Apply the MMC configuration files, which will be automatically sent, and then reboot the phone. In addition to the option discussed above, free receiving of settings in automatic mode for the phone can also be carried out as a result of a call to phone number 060432 .

After the reboot is complete, the MMS service becomes active for its use.

Configuring MMS Beeline in manual mode

In a situation where it is not possible to go to the site and get data on how to make the MMC Beeline settings in manual mode for a specific phone, then you can create an MMC profile in the settings menu of your own phone.

Information for creating a profile:

• Name: Beeline MMS;
• APN: mms.beeline.ru;
• Login and password: beeline;
• MMSC: http: // mms;
• MMS port: 8080;
• MMS proxy: 192.168.094.023;
• Protocol: MMS;
• APN type: mms;
• Authentication type: PAP.

After saving the profile with the specified MMC data, you need to reboot the phone, as a result of which a very simple procedure for sending and receiving MMC becomes possible.

Today, the MMS service is no longer something unusual and new, remains one of the most popular, because it allows you to transfer files with maximum convenience, including photos and various images.

Many users specifically try to choose exactly those operators cellular communicationwhich provided for batch mms messages. For example, the MTS company has packages for ten, twenty, or even fifty messages offered to customers, "MMS +" is a discounted service, and special tariff plans with unlimited MMS messages. There is even a free MMS show in the arsenal!

You have to set up MMS on Android for two reasons:

• Purchase of a new smartphone;
• If the settings have been reset to factory defaults.

In any of these cases, you will have to change the configuration for the service to work. This can be done in 4 ways.

Automatic tuning

Here, as the name suggests, our participation is minimal, which is very good. The bad news is that you can use this setting only once - when the device is first registered in the network of the selected mobile operator. After that, everything should already be configured, and, as a rule, you do not need to re-receive data. The algorithm of our actions is as follows:

• Installing a SIM card;
• Turning on the device (if necessary, enter the pin code). After registration is complete, the required values \u200b\u200bare searched for in the database of your operator, and the information is sent to your device.
• After receiving the configuration profile, we accept it and save it. Automatic configuration is complete.

Operator assistance

This method, like manual input, can be used an unlimited number of times. But! As you understand, it will not work exactly to sit on the fifth point, since you have to perform certain manipulations.

Each operator mobile communication has a consultation number (the service is free):

• Beeline - 0611;
• MTS - 0890;
• Megaphone - 0550;
• Tele 2 - 611 (or 679);
• Motive - 111.

Further, following the instructions of the automatic informant, we establish a connection with the operator and order required settings, accept them, and save. Then we reboot the device. Sometimes the service needs to be activated, then we call again and ask the operator to activate the service on this number. This completes the MMS setup.

Configuring mms on android on our own

What if I can't get through to the operator? In this case, you will have to act independently and set the settings manually.

Step by step it looks like this:

• We go to the application menu;
• We select the item "settings";
• Go to the opened menu in the "network" (on some devices "more");
• We choose "mobile networks";
• Go to "access points", tick "mobile data";
• We get to the section "Internet access points", click on "new access point";

We perform the following actions in accordance with those indicated in the table:

We leave everything else as it is. Please note that some devices have a "save" function. After installation, we reboot the device.

We order settings on the website of the operator of a specific region

To use this option, we change our phone to a computer, connect to the Internet, find the page of our operator through the search engine. We select the desired model of the sartphone, enter our mobile number and captcha. We press "send". Within a few minutes we receive information, save it, and install the necessary profiles. Upon completion of the process, we do a complete reboot of our device.

If it still does not work, then you need to look for an error, as a rule, in your actions.

In our material, which you read carefully, we talked about all possible ways MMS settings for android for different operators. Obviously, there is nothing super complicated in coping with the described process yourself. Follow the instructions in the instructions and enjoy the possibilities of the popular MMS Messenger. Good luck!

The mms option is a service that allows you to send to other mobile users various filese.g. audio recording, photo, text message large volume and more. Today, such a service is not particularly relevant, because with the development of modern technologies and the availability of all kinds of applications, either social networks, to exchange the above files, pay sending mms just impractical.

But nevertheless, there are situations when there is no way to go to the Internet, but it is simply necessary to send a file, then mmski are very helpful. Very often, when trying to send a multimedia message, subscribers encounter an error and do not understand why it occurs.

The point is, in order to successfully send mms, you must first configure this service in your phone. This process is easy and not time consuming. There are two options for customizing mms messages. The first is to order automatic settings on your mobile, and the second is manual settings. IN this review we will consider in detail two methods so that in the future subscribers will not have any difficulties in working with the mms service.

It should be noted right away that the mms service itself is a basic option for a subscriber's SIM card and is connected by default for all clients mobile network... But there are times when it can be disabled. Perhaps the subscriber has previously turned off Internet access and so on. But you can always reactivate mms, especially since the connection of such an option is absolutely free. To activate the service, you need to go to your personal account, select the appropriate section and click "connect". Or dial * 110 * 181 # from your phone. Then you will receive an SMS confirming the activation of the service. Then the next stage comes - this is the order of automatic settings. To do this, the subscriber can use several methods, namely:

• call the beeline support service at 060432, indicate your phone model and get the settings, or contact the operator and set up your phone in the phone conversation mode;
• go to your personal account and independently place an order for settings;
• contact the customer service center and set up your phone personally with the manager;
• on the official website of the company, select the section "mms service", from the list, click on the model of your cell phone, and then send the settings to your phone.

But that's not all, you need to know how to set up the work of mms on the beeline, when the settings are received automatically. With any option for ordering automatic settings, the subscriber receives an SMS message, the phone will request to save it. After completing this procedure, it is imperative to restart the device, that is, turn off the phone, and then turn it on so that the new profile is activated. That's all! Now you can send successfully mms messages... So that in the future you can also receive them, after the phone is set up, you need to send the first mms. If the first message is not sent, the person simply receives a regular SMS with a link where he can familiarize himself with the information in the sent mms. In the future, the service works correctly, but if the phone model changes or there was a temporary installation of a SIM card from another operator, then the entire setup procedure must be repeated again.

Manual setting

But there are often cases when SMS with automatic settings does not arrive at the subscriber's phone. There is only one reason - the billing system mobile operator cannot recognize the model of your phone, this happens with models of Chinese cell phones, or with mobiles that were brought into the country without a license. There is only one way out - this is manual settings mms beeline.

The principle of operation is the same as with automatic ones, only all the data must be entered manually in your phone. To do this, we order an SMS with manual settings, where the access point, correct network, proxy, etc. will be indicated, after which these data must be registered in your phone. The list of actions is as follows:

• go to the menu of your phone and select the settings for mms messages;
• then open the menu for entering data;
• in the profile name field, enter beeline mms;
• in the field access point mms.beeline.ru;
• all other fields, as a rule, are already indicated, they are standard, they are corrected only if they do not match;
• then we choose to save the new profile;
• after saving, a green pendulum (button) should light up opposite the required access point.

At the end of the manual configuration, we restart our phone and send the first test SMS message to any subscriber.

In case of various difficulties with the settings of MMS messages or Internet access, you can always call the operator of the company and get advice, also contact the customer service center of the company with a passport and a telephone.

Although this option is rarely used in the modern world, the clients of the "yellow-white" operator are regularly interested in the method of setting up MMS Beeline, because sometimes only this method of transmitting multimedia content is available. Here is one of the cases of using the service: a grandmother asks her grandchildren to teach her to send photos. Using advanced communication methods through smartphone applications is already too difficult for her, and sending photos via MMS from a regular push-button telephone - just right.

Receiving MMS (in the form of a text link that can be opened in a browser) is available to any Beeline subscriber, even if he has not activated the service and has not configured the phone. But to send multimedia messages, these steps will have to be performed in order.

Activation of the option is available in a special "Three-Service Package", which is a combination of 2G-4G Internet access and MMS transmission (the third service is WAP, but it is outdated and not used).

"Three services" are available by default for everyone new SIM... If they were once deactivated and you want to activate the package again, just type on the keyboard uSSD request * 110 * 181 # and press the call button. Now it remains only to set the parameters of access to the MMS system for the "cellular".

How to set up MMS on Beeline automatically

The most efficient way to start using multimedia messages is to get the MMS settings of Beeline on a smartphone ready-made. This is done on the yellow-and-white website at the link:

1. Open the section "MMS Settings" of the Beeline website in your browser or simply follow the link above.
2. Specify the manufacturer and then the model of the device.
3. Click on the "MMC" label, make sure that the operator offers autotuning for your device.
4. Indicate the subscriber number, click "Send" and wait for the service SMS from the operator.
5. If there is no possibility to request auto tuning for this unit, the manual tuning algorithm will be displayed on the screen.

Another way is to dial 0880, after which an SMS will also be sent to this number. When a service message arrives, a request will appear on the display of the device to apply the obtained parameters, then a field for entering a password. Agree to the request and enter the code "1234". Reboot your phone. Hooray, now you can send MMS!

Settings for MMS Beeline manually

If autotuning for your model is not presented on the website, or the device does not want to accept them for technical reasons, MMS Beeline settings are also available for self-installation.

Here are the main parameters, which are enough to make the option work:

• Profile name: BeelineMMS
• Access Point Name: mms.beeline.ru
• Name / password: beeline
• ProxyServer: 192.168.094.023
• Port: 8080 (for very "ancient" devices - 9201)
• MMSC: http: // mms

The suggested manual settings are indicated in the communication section on different phones items can be named differently. Let's consider examples for common operating systems.

MMS Beeline settings for Android

An approximate algorithm for this "operating system" will be as follows:

1. Select "Settings" from the main Android menu, then tap on "More ...".
2. Find the section “Mob. network ”and check the box next to the“ Data transfer ”parameter.
3. Open the list of access points and create a new one.
4. Enter all the connection parameters above.
5. Save changes and restart the machine.

How to set up MMS for iPhone

Let the settings on an iOS phone be slightly different:

• Open the "Settings", go to the "General" menu.
• We are looking for the inscription "Network", and then the subsection "Cell. data transmission network ".
• We activate the item "Cellular data".
• Enter all the necessary parameters, save.
• We send the smartphone to reboot.

The ability to send multimedia messages is distinctive feature modern mobile communications. ММС Beeline are information messages that may contain graphic and sound files, text documents and links. In this case, the volume of files will be about 500Kb, no more. When sending such a message, you can show your writing skills in all its glory, because the total amount of text characters allowed for sending is more than one thousand characters. You can send MMS not only to any mobile phone in Russia and abroad, but also to e-mail. The cost of sending a message depends on the basic tariff of the subscriber and is usually about 7.95 rubles.

If you have an Internet connection, then the MMS Beeline service may not be available to you, or rather disabled by default. To send multimedia messages, you will have to make the necessary changes yourself.

How to connect MMS Beeline?

• To activate this messaging system, you just need to call 0611 and follow the instructions in the voice menu. You can also just go to your personal account and just check the services connected to your tariff. If of this service you do not have, then you can connect it in the following ways:
• Use the usual USSD command *110*181# ... The system for sending and receiving MMS will be connected instantly, and you will receive an informational notification about the activation of the service.
• You can also connect the service in the corresponding menu of your own personal account... Simple follow Services \u003d\u003e Available, select MMS from the list.
• To simplify service management, you can use special application for smart devices "My Beeline".
• If you go to the local Beeline customer service office, then specialists will definitely help you.

Automatic activation of MMS Beeline

The MMS profile will require correct settings, which can be obtained automatically from Beeline. The procedure is as follows:

Find your phone model in the search system and then use the link "MMS Settings Beeline", which is also in the SIM card menu. When you click on the link, the system will automatically send you the necessary settings.

The system will prompt you to continue setting up MMS. Just follow the instructions.

Enter your phone number and request the required settings. In rare cases, automatic configuration of system parameters is not possible. Then you will have to look for a way to activate MMS for a specific phone model. Usually all the information you need is in the user manual. The setup procedure will vary depending on the phone model.

After receiving the special file with the system configuration, you will need to launch it and then reboot the device. You can also get the necessary settings by calling the number 060432.

If all settings were activated correctly, you can send and receive MMS immediately after activating the service.

Manual MMS settings Beeline

If you are not able to use the methods listed above, you can independently create a new MMS profile from scratch and write the necessary configuration parameters into it. Here's what data you need to add to your profile to make it work.