The Rostelecom remote control can be used to configure and control the set-top box and directly the TV, but before that you need to configure it.

Rostelecom remote control scheme

The vast majority of all buttons on the device are similar in functionality to any other television remote control. Although the company decided to ditch the four standard button colors - red, blue, green and yellow - that can be found on almost every model. So, in addition to the numbers from 0 to 9, here are the keys for turning on / off the TV and set-top box. The arrows control the main menu. In addition, "to the left" calls up additional control tables, and when manually entering characters, it also erases unnecessary letters and numbers.

You cannot do without buttons on the remote control that are responsible for returning to the last visited television channel. For example, after watching the 25th channel you decided to watch 51, and by pressing this button you can return to # 25 again. It is also provided for switching channels to adjacent: next and previous.

As with any remote control, there are buttons for pause, play, rewind and fast forward. The device is convenient for viewing and managing recordings. The buttons for increasing / decreasing it, as well as zeroing and returning to the previous level are responsible for the sound.

Another function of the Rostelecom remote control is the cancellation of the last performed action, switching to the “Audio” or “Video” mode, setting up “Interactive TV”, changing the viewing mode in the device menu, confirming the selection and calling additional setting panels when watching TV.

Setting up the remote control using the manufacturer's code

Main note: during selection, the TV must be turned on!

Algorithm of the setting action:

Automatic tuning

You can also configure the Rostelecom remote control by enumerating codes in automatic mode. So, for this, the following operations should be performed:

1. Simultaneously press and hold the buttons for two seconds TV + OKto enter the keypad programming mode. The change will be signaled twice by the LED on the device.
2. Dial the three-digit code on the remote control - 991 ... It gives rise to the selection of the optimal combination of device and number dialing.
3. Press buttons to switch TV channels. Each time you press, the TV will select one of the codes in the database and give the command to turn off.
4. When the device turns off after pressing CH + again, press OK. The operation will help maintain a suitable combination for the job. The successful saving of the four-digit code is usually indicated by two flashes of the LED on the remote control. This completes the TV setup algorithm.

How to reset settings

If you need to reset the settings, you must do the following:

1. Press and hold the above buttons TV and OK until the LED on the first one blinks twice. Thus, the gadget starts functioning in a new mode.
2. When the remote control enters it, you must enter 997 ... Correct entry will be reflected by four flashes of the diode located on the POWER button. After that, all previously existing settings will be deleted.

Eliminate hardware conflict

What is meant by this concept? It is not uncommon for one button of the Rostelecom remote control to give signals to both the TV and the set-top box. In this case, most likely, the digital codes for the two devices coincided. This problem can be solved by changing the originally laid down numerical combination. After all, the operation of the set-top box and the TV depends on these codes.

You can eliminate this problem as follows:

1. Connect the console.
2. Point the remote at the device and press OK + Power. Keep both buttons until TV blinks twice. This will start the system programming mode.
3. Manually enter one of the listed codes - 3220-3224. After that, the new combination is installed.
4. After that, you must make sure that the conflict is settled. You should check the operation of all those buttons that previously caused the operation of two devices at once. The situation has not changed? Then you need to select some other numeric code and repeat the described steps.

As you can see, setting up a remote control from Rostelecom is quite simple. After reading this manual, you can carry out the necessary operations yourself. If all the steps are followed accurately, the setting should not cause any problems.

How to set up a universal remote control?

If I still knew which remote, which manufacturer, it would be possible to say more precisely. Although, the principle of setting up a universal remote control is similar in most cases.

So, we want to teach the remote control to operate several devices.

Here's the usual way:

• First of all, we find on the remote control the buttons that we will teach ”(TV / DVB, Radio, DVD, VCR, etc.)
• We find the SET button (it can also be called LEARN). We will need these two buttons to configure our device.
• In the book for the remote control we find the CODE of our device. The code can be 4-5 digits long. It is advisable to use the code for the exact model of the device that we have. If this particular model is not on the list, the code of the earlier model is usually suitable. But it is possible that some advanced functions will not work as they should.
• So, start programming... Click on the button SET and TV at the same time and hold until the lamp / indicator on the remote lights up (usually next to the POWER button).
• Then we set the code that was previously found in the instructions. After that, the light should go out and you can immediately use the remote control in connection with the selected device.

If the code did not fit or it was not possible at all to find a similar model, many remotes have an autosearch function. For example, if you press the same SET + TV buttons, and wait until the indicator flashes, the remote control itself will start trying to establish communication with the device. If he picked up the code and some action occurred on the device, then you should immediately press any button on the remote control in order to confirm the found code.

These steps apply to almost all universal remotes without a display. If someone wants a little more comfort in controlling their equipment, then you can purchase such a miracle device as the Logitech Harmony Touch Remote. This remote control practically does not need to be configured, as it recognizes any device with infrared control. By the way, the remote control is able to convert the IR signal into a Bluetooth signal, which allows using the remote control at a greater distance without pointing it directly at the device. And it works even through cabinet doors and from another room.

Perhaps, now you cannot find a single living space or office where modern household appliances are not used. When it comes to television and radio equipment, then they always come with remote controls. And there are more and more such devices that make our life interesting, comfortable and diverse.

In order not to be confused every time, which remote control, from which device, you can purchase one, but capable of turning on and off absolutely all household appliances in your home. Such technical devices have long been in common use, but many people are frightened by the fact that they do not know how to set up a universal remote control.

The differences between a regular remote control for a certain type of equipment and a universal one lies in the fact that inside a small plastic box there is a certain microcircuit that allows you to expand the memory of this device and write commands not to one receiver, but to several at once. Let's see how this can be done.

Where to begin?

If you do not know how to set up a universal remote control for TV, DVD and other home gadgets, then, first of all, you should look into the box from the purchased remote control. Most often, there is a specific instruction that will help you figure out how to configure this particular remote control.

On this piece of paper, which is an instruction, you can find codes with the help of which even a person who does not know how to set up a universal remote control for a TV, stereo or air conditioner can do it without any problems on their own.

Codes are four-digit combinations of numbers that correspond to a specific brand of household appliances. For each of them, several codes are provided, and in case of failure with the first set of numbers, you can try the following.

Active buttons

To set up the universal remote control, we need only a few of the many buttons located on the work surface. These are the TV, SET (or DVB) and POWER buttons. In addition, an important indicator when configuring the remote control will be a signal light, which is present on each universal remote control and is absent on a regular one.

Getting started setting up

There are several ways to set up your remote and if you fail with the first, you should go to the second and so on. The main thing is not to rush and understand the sequence of actions:

The same algorithm of actions should be carried out with all other household appliances, which can be controlled using a multifunctional remote control.

List of R-TV2 codes

Some time ago, the Sokol 37TC6150 TV remote control broke down. I had to buy a universal R-TV2 remote control (aka RTV-02). After I programmed it, I foolishly threw out the instructions as unnecessary, relying on excellent memory and the Internet.

But when this instruction was needed again, I doubted that I was entering the correct code and no information was found on the worldwide network.

After 2 days of active searches, a solution to this problem was still found. And this entry is more like a memo for yourself (just in case). Well, maybe it will come in handy for someone too.

R-TV2 Instruction (RTV-02)

R-TV2 (RTV-02) is a universal remote control, which contains more than 800 TV codes of various brands, including codes for modern LCD TVs. The remote control stores the selected codes even when the batteries are removed.

A. Model search.

1. Click the button SET and hold the button of the required brand for 5 seconds. The indicator should flash.
2. Release the buttons when a signal appears VOL on TV.
3. Check the basic functions of the remote control. If they work, the installation is complete. If they do not work, repeat step 1 or use the second search and installation method.

B. Manual entry.

1. Press simultaneously the key SET and the key POWER
2. Enter three digits of the code on the numeric keypad of the remote control. After dialing the third digit, the indicator turns off - the installation is complete.
3. If you want to stop tuning, release the key SET for a while.

C. Manual code search.

1. Press simultaneously the key SET and the key POWER and hold until the indicator turns on.
2. Press the key VOL + until maximum volume is reached. Then press the key SET to save and exit the mode.

D. Automatic code search.

1. Hold the key SET about 5 seconds. The search will start when the indicator turns on.
2. When appears on the screen VOL , release the key and test other function keys. If switching occurs, the setting is complete. If not, repeat step 1.

Remote control for Rostelecom TV

Continuing a series of articles about Rostelecom TV (IPTV from Rostelecom), I decided to take a closer look at the remote control. Remote control on a new platform Rostelecom TV goes the same for all consoles that SML-282what do iptv-hd-101 from Promsvyaz.

In principle, this is the right approach - after all, the platform is one, the functionality is also the same, and accordingly, there should be one remote control. It is more convenient for both subscribers and technical support. Separately, I note that the remote control turned out to be unusual, but very ergonomic and easy to use. By the way, when developing the concept of the remote control, the developers immediately left the standard menu control through four colored buttons - red, green, yellow and blue, making their own control scheme.

The meaning of each button on the remote control home TV Rostelecom can be seen in the diagram ( the picture is clickable):

Rostelecom TV remote easily programmed for most modern TVs - either through a special code or through autosearch. Let's try both ways to configure the remote:

During setup, the TV must be switched on!

Setting up the remote control according to the manufacturer's code:

step 1. Push buttons OK and TV lED on TV button will not blink twice - by this action you switched the remote control to programming mode.

step 2. Then, using the remote, we dial 4 digits of the code corresponding to your TV model from the table under the spoiler below.

step 3. If you entered the code correctly, the LED on the remote control will blink twice. If the LED lights up for a long time, repeat steps 1 and 2 again.

step 4. Trying to control the TV from the remote control - add the sound volume. If the volume on the TV has increased, then the code is set correctly and the remote control is ready to control both the TV and STB set-top box. Otherwise, try another code from the table.

TV codes:

Setting up the remote control by automatic enumeration of codes:

step 1. Push buttons OK and TV simultaneously and hold it for two seconds until lED on TV button
step 2. Enter the code 991 from the remote control.
step 3. Press the channel switch button CH +... At every button press CH + the remote will select a code from the internal list and send the TV off command.
step 4. As soon as the TV turns off, press the button OK to save the code. If the code is saved successfully, lED on TV button blinks twice. The console is ready to be operated.

If necessary reset remote control settings Rostelecom TV - we do the following:
step 1. Push buttons OK and TV simultaneously and hold it for two seconds until lED on TV button will not blink twice to switch the remote to programming mode.
step 2. Enter the code 977 from the remote control. LED on the POWER button blinks 4 times.
step 3. All special console settings have been removed.

Note:
If, when controlling an STB set-top box with the remote control, the TV is simultaneously controlled, i.e., for example, you switch channels on the TV when the volume on the set-top box is changed or vice versa, then this means that the control code of the set-top box and the TV control code match ... To fix this, you need to change the code by which the console controls the prefix.
This is done as follows:
To change the code, do the following:
step 1. We direct the remote control to the console.
step 2. Push buttons OK and Power simultaneously and hold it for two seconds until lED on TV button will not blink twice to switch the remote to programming mode.
step 3. Choose one of the codes:
3220
3221
3222
3223
3224
and enter it from the remote control.
step 4. You have installed a new code.
step 5. Let's try to press a button on the remote control, which causes a control conflict with the TV. If the conflict is not resolved, select another code from the table and repeat steps 1-4.

How to set up a universal remote ...

The 10 in 1 universal remote control is a multifunctional remote control. With this remote control you can control devices made in the USA, Japan and Taiwan (about 400 brands in total). 1. Control of ten types of devices: TV, VCD, DVD, CD, LD, VCR, CABLE, AMP, TAPE, SAT. (TVs, video recorders, DVD-players, MP-4 players, stereos, amplifiers, satellite tuners, combined devices, air conditioners, etc.

Where to find codes for universal TV remotes

The Vivanco Universal Remote is a remote control designed for TVs and other devices that receive and transmit an analog or satellite TV signal. The universal remote control does not reproduce all the functions of the original device, but it is suitable for solving basic control tasks - switching channels, changing the sound volume and starting video. All that is required before using it is to configure the required parameters.

How to set up and connect a universal remote control to the TV ...

The days when it was possible to switch the TV only manually are long gone: today all TVs have a remote control, and sometimes not one. Unfortunately, the remote control is quite fragile: it can break or get lost, and buying a new one can be a serious problem.

How to set up a universal remote

One of the few remotes with a very large number of codes for TVs, VCRs, DVDs, receivers, computers, etc. Life began with MAK 2000 and then, as codes were added and new models were released, the numbers changed for the year in which it was published. At MAK MAXIM, the development of the remote control has ended, with modern equipment, it does not work very correctly, it does not perform all the functionalities, we have to take other remotes, but with a large mass of equipment that still work in our house for 10-20 years, there is no better analogue ...

How to set up a universal TV remote?

Typically, a universal remote control (RC) is a small box with LEDs, circuits, and buttons. It works due to the fact that the infrared sensor on it transmits the desired code to the same sensor in another device. With it, for example, you can adjust the volume of the sound, switch channels, change the power of a particular device, and much more. It differs from the usual universal remote control in that several electrical appliances can be simultaneously recorded in its circuit. Today we'll take a look at how to set up a universal TV remote control.

How to set up the TV 139F universal remote control for ...

Now it is difficult to imagine our life without electronic household devices. We use them all the time: both for entertainment and for solving everyday issues. Often these devices are equipped with a remote control function using remotes. Every year the number of electronic equipment in our homes is increasing, and with this, the number of remotes for them too. But very often the remotes are lost, and you have to search for them for a long time.

How to program the universal remote

Tired of juggling three or four different remotes to control your home theater? Use one universal remote control (RC) to control multiple devices at once. Universal remote controls are usually programmed in two different ways: either by entering a known code, or by searching for a code.

How to set up a universal remote?

Not so long ago, people could only dream of a remote control that would allow the viewer to truly relax, without getting up every time from the warm sofa to change channels, adjust the volume or turn off the TV. In our time, a new problem has arisen. The modern owner of video and audio systems becomes hostage to competition between different manufacturers who use special codes in wireless systems that differ from others. Because of this, even a universal remote, if not trained, cannot control competitive components.

How to set up a universal remote control for a TV?

This article provides detailed instructions on how to set up a universal remote for all TVs. One such device can easily replace all other remote control devices in the house. The UPDU can set commands to different equipment thanks to a special microcircuit that can generate several pulses at once.

How to set up a universal remote? All universal remotes for TVs, players, air conditioners, barriers and gates work according to the same principle. Each button of such a remote control, when pressed, can generate a code for a certain sequence of IR pulses of the remote control, one code out of many. The codes for the remote controls are stored in non-volatile memory. The question of how to set up a universal remote control boils down to choosing from a variety of codes one that corresponds specifically to your TV, barrier or other device.

Manufacturers of equipment try to equip each of their devices with a remote control so that the user is comfortable using their products. You don't need to get up to turn off the light, adjust the operation of the air conditioner, fan, or turn on / off the TV, everything can be done while sitting on the couch. This is, of course, convenient, but over time, coffee tables become cluttered with different remote controls, which creates a certain confusion and annoyance.

If you do not yet know that there is a universal remote control that can be configured to control several devices at once, then in this article we will tell you about all its capabilities and provide instructions on how to use and how to properly configure it.

If you have become a happy user of digital television, then a new device with a remote control has appeared in your apartment - a receiver set-top box. And in order not to add another remote control to everyday life, let's figure out how to use a universal remote control.

Despite all the breakthroughs in technology, remote controls have not changed at all. They can have different shapes, but the design of any remote control still consists of a body, electronic circuit, buttons, LEDs, and an autonomous power supply.

The universal remote control has an identical internal structure, only it can be configured to control several devices at once. For example, having bought such a device, you can remove the television, set-top box and multimedia remote control in the closet, and register all their functions in the universal remote control.

Can any remote control be universal? Not. Although outwardly they are similar, their internal electronic circuit is different. Only devices designed for this can be configured to control multiple devices.

Difference between original and universal remote

A TV remote control, for example, a Tricolor TV, is a useless device in itself, it can only be used in tandem with another device - a TV receiver, for which it was created.

The principle of operation of the remote control is based on three actions:

• When you press a button on the device, you mechanically activate a microcircuit in which a certain sequence of electrical impulses is created;
• The LED element of the remote control converts the received command into infrared radiation with a wavelength of 0.75-1.4 microns, and sends a signal to the paired device;
• The TV has a phototransistor that detects this IR signal and converts it into its electrical impulse, transmits it to its control unit, so that the command you specify is executed.

The communication method used in remote controls is called PCM, or Pulse Code Modulation. Its peculiarity lies in the fact that each command is assigned a separate 3-bit sequence, for example:

000 - turn off the TV;
001 - select the next channel;
010 - return the previous channel;
011 - increase the volume;
100 - decrease the volume;
111 - turn on the TV, etc.

That is, when you press a button on the remote control, the electronic circuit turns on the IR LED according to the preset pattern: “111” - ON, ON, ON, with a clear signal step length, for example, 3 milliseconds. If you have selected the volume control button, which has the code 011, then the LED will perform three such actions with a predetermined delay: turn off, turn on and turn on again.

There are three different types of remote controls on the market:

• Original;
• Unoriginal;
• Universal.

Original and non-original remotes are control devices created for one specific model of technical devices. The only difference is that the first type is produced by its own manufacturing plant, where the TV itself was assembled, and non-original remote controls are produced by different companies under license.

Universal remote controls (UPDU) are learning control devices that:

• Can be customized;
• Suitable for many TV models;
• Can be used instead of the lost remote control for any technical device.

The universal remote control can be chosen in shape, size, color, design, depending on personal preferences. Inside such a device there is a special program and a special code base that allow you to determine signals from almost any TV.

The most common brands of universal remote controls are Supra, Huayu and Beeline.

How to find the TV code

To set up a universal remote control for your TV, it is advisable to know the three- or four-digit code of a specific model. You can find such codes either in the technical passport of the TV, or on the manufacturer's website, or in special ones. It's called that - "Code for setting up the remote control".

But how do you set up your remote to your TV if you can't find the correct code for your model? For this, each UPDU has an automatic setup function with a program code search. You just need to press the desired combination of numbers, after which the auto-selection command will start.

Setting up universal remote controls

The first step is to insert the power supplies into the remote control. Some remote controls are sold without batteries, so you have to buy them extra. You can stay on batteries, or you can immediately purchase rechargeable cells. The second option will cost more, but they can be recharged hundreds of times from the mains.

Then turn on the TV, which will be paired with the remote control. On the remote control, select the desired mode: TV, DVD, PVR or AUDIO (to set up the TV - button "TV"). Hold the button for 3 seconds to turn on the indicator on the front of the instrument.

But the next steps will be different: if you do not know the model code of your TV, then go to the next section of automatic setup, and if you know the code, then read the instructions for manual setup.

Automatic

On the digital panel of the UPDU dial the number "9999" without removing your finger from the "9" key until the TV receiver turns off. After that, the procedure for automatic selection of channels will begin, which can take up to 15 minutes.

This method is used if the code for the brand of your device is not in the list of brands. However, if there is a conflict of control buttons (the function of one button extends to several devices), then their correction will be impossible if a search has been started in the entire database (with the combination "9999").

In different models, the combination of buttons may be different, it is better to look at the information on the packaging from the remote control or in the instructions attached to it.

To set up the SUPRA (Supra) remote control, which is most often used to control TVs TM LG, Samsung or Philips, the algorithm will be as follows:

• Turn on the TV;
• Direct the remote control at him;
• "Power" and hold it for 5-6 seconds until the LED lights up;
• Wait until the volume icon appears on the screen. Try to change the sound setting, if the TV responds, then the setup was successful.

HUAYU UPDU is configured according to the following scheme:

• Turn on the TV;
• Press the button on the remote control panel "Set"followed by the button "Power", and then release both buttons at the same time;
• Press the key again "Power";
• Make sure the volume symbol appears on the screen;
• To exit the programming mode, press the key 2 times "Set".

There is also a third auto-tuning option, implemented in some models of universal remotes:

• Turn on the TV set;
• Click the button "TV" and hold it until the LED lights up;
• Press and hold the button "Mute" to connect search;
• Wait until the end of the process and check the operation of the remote control with any command: if the TV reacts, then the remote control is configured successfully.

Manual

All TVs have their own pairing code, and knowing it, you can quickly set up a universal remote control. Find out your model code and do the following:

• Turn on the TV receiver;
• Press the button on the UPDU "Power" and, without releasing it, enter the code of your TV model;
• When the LED of the device blinks 2 times, release the button "Power".

• To enter programming mode, press two buttons simultaneously: "Power" and "Set" and wait for the constant illumination of the PU indicator;
• Enter a four-digit code;
• The indicator should go out, the exit is done by pressing the “Set” button.

UPDU Beeline

• Turn on TV;
• Press 2 buttons: "C" and "Setup";
• Wait until the initialization is complete and after the indicator blinks 2 times, the buttons can be released;
• The performance check is carried out with the "Vol" button.

If you do not have time to enter the code within one minute, the TV will be switched to normal mode and the setup will need to start over.

No code

You can also set up a universal remote to control your TV using the code search. To do this, follow these steps:

• Turn on the TV and point the remote control at it;
• Press two buttons at the same time: "TV" and "OK"... Keep them active for 2-3 seconds until all buttons on the remote control light up. Wait until only the numeric buttons remain lit;
• Slowly press the channel switch button "CH +" until the TV turns off, this will mean that the code has been picked up;
• Click the button to save the settings. "TV".

Please note that the code selection speed is different for each TV model, therefore, while pressing "CH +", wait a couple of seconds to notice the reaction of the TV set.

Smartphones with universal remote function

Did you know that the latest models of some smartphones already have a universal remote function? You don't have to buy another remote control, but simply set up your phone to control all devices in your apartment, but only those that have the SMART option.

To set up a universal remote on your smartphone, you have to visit the Playmarket and download the mobile app. There are a lot of them, so read the reviews and find the most suitable one for you.

After starting the program, you will be offered a list of equipment (set-top box, media streamer, TV, player, smart home, etc.). Choose what you want to manage. Next, you will need to indicate the manufacturer and the pairing method (Wi-Fi, Bluetooth, IrDA).

The program will start searching for equipment, and as soon as you see the name of your equipment on the phone screen, select it. A special confirmation code will appear on the TV display, which will remain to be entered into the program on the smartphone. Now you have in your hands not just a phone, but also a remote control.

This setup is extremely simple and straightforward. All instructions appear sequentially on the phone, and you just have to confirm your actions. For such a setting, you do not need to know the code and automatic search is also not required. Remote communication is established using the selected wireless communication technology with specific devices in your apartment.

Having a single remote control for all equipment in the house is very convenient. And as you understood from our article, setting up a universal remote control is quite simple and quick.

Note.

When purchasing a modern TV, you usually buy a remote control for it, since it comes with the device itself. However, in life, all sorts of situations are possible when you already have a TV, but there is no remote control for it.

For example, your branded "remote control" could be out of order, or the television receiver came to you through third hands. Or something else. In each case, the so-called “universal remote control” will help - a remote control suitable for literally any TV model.

You can buy such a device completely freely, since it is not the result of the amateur creativity of homemade masters, but the same product of the modern electronic industry, like everyone else.

Moreover, universal consoles appeared a very long time ago, long before the spread of the current digital broadcasting format began. After all, the need for such equipment has been felt on the market from the very moment when it became possible to control televisions and other household appliances from a distance using an infrared signal.

It is not enough to buy such a device. You still need to learn how to use it. With consoles of the old formation, everything was simpler - a standard set of approximately equally marked keys would hardly slow down the aspirations of even the most technically illiterate person.

The new TV has become, on the one hand, more functional, and on the other, it has become more complex. And no efforts of developers of intuitive interfaces to solve this problem are still able to.

That is why we have dedicated this article to setting up a universal "remote control" for a digital TV. Depending on the model of the remote control, this can happen in different ways, although some common points of this process are common to all models. How to set up the remote control - read on.

Setting up remote controls with labeled buttons

It so happens that the names of famous brands like Samsung, Daewoo, Sony, LG and so on are found on the keys of the universal remote control. If so, use the first of our instructions:

• We turn on the TV.
• We de-energize all nearby devices that can interfere with our work (for example, a DVD player).
• We direct the remote control towards the television receiver.
• Click on the one of the buttons that is marked with an inscription with the name of your TV model.
• Hold the key down for a while.
• After a few seconds (maybe 10) your TV will react to the remote control signal and adjust so that you can work with it remotely. This is indicated by the TV turning off, the volume icon or setting options appearing on the screen. In a word, we are waiting for some noticeable reaction and immediately release the remote control button.

All this is needed in order to bind the remote control to the TV receiver. After the end of this simple procedure, the TV remote control should function as intended.

If there is documentation for the device, be sure to study it. So you can learn about the very useful, but not obvious capabilities of your universal device.

If there are no labels on the buttons?

In this case, the configuration takes place in a different scenario. Remote controls of this class must be supplied with instructions in paper form. The most important point in this manual is a table of TV models and the so-called remote activation codes.

If the instructions are in English, look for a sign with a title like this: "Code list for TV" or something like that.

Pay attention to the body of the remote control, there is necessarily a small LED indicator that reflects the current state of the device - we need it when setting up.

• We find in the table the code for your receiver model (usually a four-digit number).
• We turn on the TV.
• We direct the remote control towards the TV and press simultaneously on two buttons: turn on the TV and the key with the inscription “Set”.
• Next, by clicking on the channel numbers, enter the code.
• If after that the light on the remote control went out, then our work was crowned with success - the setting is completed. If this does not happen, we try other suitable codes from the table in the instructions.

It may happen that the "Set" keys are not found among the buttons on the remote control. No problem. This means only one thing - your remote control is designed to work not only with television receivers, but also with other multimedia equipment: players, satellite dishes and other equipment.

Then, instead of the "Set" button, you can use any other key.

For example, with the name "TV". This concludes our review, and you have learned how to set up a universal remote control for your TV.

How to set up a universal remote remote control? When you buy a universal remote control, the seller explains to you how to set it up for your TV or dvd player model. If they did not explain to you for some reason, or you bought the remote control in an online store, or once they explained to you how to set up a universal remote control, but eventually you forgot all this, then read this article.

I will say right away that there are quite a few universal consoles, all sorts of different modifications and configurations that differ from each other, that is, let's say there are a hundred pieces of consoles and they are all called universal, but they look differently externally, and are also configured differently. Now I will describe some of the most common ways to set up a universal remote.

Method one: If the buttons of the universal remote control have inscriptions: Samsung, LG, Sony, Daewoo and so on and if the name of your TV is written on the button of the universal remote, then you can try to set up the TV with a quick setting, for this you need to turn on the device to which you will configure the universal the remote control if another device is turned on nearby, such as a dvd player, then it must be turned off to avoid interference. Your TV is turned on, you point the universal remote at the TV and press the button on the remote corresponding to your brand of TV and keep the button pressed for a few minutes until something happens, for example, the TV should turn off at this moment, release the button immediately or the volume sign will appear on the screen after release the button, the entire TV set should be tuned.

Method two: When buying a universal remote control, the box should contain a small book or a piece of paper folded several times, it contains instructions for setting up a universal remote control and many more different numbers. Let's dwell on the numbers. The numbers written in the book are codes for setting up the remote control. As a rule, a universal remote control has a small indicator light that informs about the status of the remote control. If you are already ready to start setting up the remote control, then open the code book, find the codes you need, for example, the codes for the TV are signed on top of "CODE LIST FOR TV" if you need a code for the TV, look for the brand of your TV in this list, opposite your brand the TV will already have written codes for your TV, there are many codes for each brand, several codes, but you only need to enter one code into the remote control, it often consists of four numbers. Then, when you find the code for your TV, turn on the TV, direct your universal remote control to the TV, press the "SET" button and the (on / off) button of the TV at the same time, the lamp should light up, then dial the code for your TV remote control the lamp should go out. The entire console is configured. If the code did not fit which you entered first, then you can try to enter another code in the same sequence.

Note: if your universal remote control does not have a button with the name "SET", then most likely you have a multifunctional remote control and is configured for a TV, dvd player, satellite dish and so on. In this case, it is necessary to simultaneously press another button instead of the "SET" button. For example, if you set up the remote control for a TV, then simultaneously press the "TV" button and the (on / off) TV button, then the indicator light should light up and you enter the code as described in the second method for setting up the universal remote control.