MMS is an instant multimedia messaging service that allows service users to mobile communications use the ability to send other subscribers texts, photos, video and audio recordings. The maximum size of files that can be sent is 500 kilobytes, and the number of characters in the text must not exceed 1000 characters. You can send multimedia messages not only to telephone number, but also to the email address. You can send MMS both within the territory of Russia and abroad. The cost of sending one message depends on the tariff and averages 7.95 rubles.

Sending MMS from Beeline via the Internet has recently been blocked, therefore, in order to be able to communicate with subscribers through multimedia messages, you need to connect and configure this service on your mobile phone.

How to connect MMS to Beeline?

You can check whether the MMS service is connected or not by contacting the Beeline support service at 8-800-700-0611, or by visiting home page your personal account where a list of connected options is displayed. If the option is disabled, you can activate it in one of several available ways:

• Dial and send the command * 110 * 181 # call from the phone. It connects a package of three services, which includes support for sending and receiving MMS messages.
• Go to your account, open the "Available" list in the "Services" menu, then select the MMS connection. In the same way, you can connect the service through a mobile application from Beeline for Android and other mobile platforms.
• Contact an employee at one of the Beeline offices with a request to connect MMS - they will help you completely free of charge.

Automatic MMS configuration

After connecting the MMS, you must correctly configure the option to be able to read and send multimedia messages. To do this, follow the steps:

1. Follow the link: MMS settings to get into the menu for automatic receipt of MMS settings for your phone model.
2. Select your phone model from the drop-down list, or enter its name yourself.
3. Click on the "MMS" button, then select "Yes, go to MMS settings".
4. If there is an option for automatic configuration, enter the phone number in the window and click the "Submit settings" button. If only manual MMC configuration is available, carefully read the instructions provided for your phone model and strictly follow its instructions (for different phones, the actions may differ).

The MMC configuration files obtained in automatic mode must be applied, and then the phone must be rebooted. In addition to the above method, you can get automatic settings for your phone for free by calling 060432.

After the reboot, the MMS service should be activated and become available for use.

Manual MMS setting

If for any reason you cannot enter the site and find out manual settings for your phone, create an MMC profile in the phone settings menu with the following data:

Save the profile with the above MMC parameters and reboot the phone. After that, you will be able to send and receive multimedia messages.

MMS are colorful, singing messages that we share with our loved ones. We choose what to send. It can be a photo, a funny picture, a screen screen, a new track, or a funny animation. In order for the phone to be able to send and download such messages, you must activate this function and save the corresponding settings.

Let's take a closer look at how to do this.

Preparing to set up MMS

Before you start, you need to check if your phone supports sending and receiving multimedia messages. This is indicated in the instructions for your device.

Then you should connect the "Package of three services" from Beeline. It includes MMS, chat. To connect, we type the following combination

After that we press the call button. In response, you should receive a message about the activation of the service by your number.

And the last thing - turn on the cellular data transfer on your phone.

Configuring MMS

You can get the settings from the operator. To do this, make a free call to the number

On the official website of Beeline, the user can get comprehensive information on setting up the MMS service.

First, we indicate the model of the device, then we select a service from those offered by the operator.

We set up the Internet, if it was previously inactive by number.
To go to MMS settings, press the "Yes, go to MMS settings" button.

Depending on which phone model you have, manual settings or automatic settings will be offered.
Automatic ones will come to the phone. To apply them, click "Save" and then restart the device.

You must enter manual settings yourself. They will be activated after restarting the phone. To make sure the service works, we send a message to any addressee.

Note to the user

It should be noted that modern smartphones do not imply the use of automatic settings, so be prepared to enter them manually.

If they are available, then do not be afraid to enter your phone number when filling out the form. This is required to send the configuration to your device. The service is provided free of charge. The Beeline online service for setting up MMS has active prompts near each of the entered fields, which ensures that the correct settings are obtained.

Posted Tue, 03/13/2012 - 16:22

In order to receive and send mms messages, as well as in order to access the Internet from the Beeline phone, you need to configure your mobile phone. There are two ways to configure GPRS connection, as well as to configure sending and receiving mms messages - manually and automatically. This article describes how to get automatic settings Beeline and setting up mms, wap, gprs, java connections in manual mode.

Configure the Internet, auto-tuning via request.

Number to send or send phone settings, to receive mms and sms on the beeline phone.

1. Automatic settings Beeline receiving via SMS.

In order to receive SMS with automatic GPRS-Internet settings for Beeline on your phone, call the number 0880 ... Password for saving settings 1234 .

To receive automatic MMS settings, you must order them on the Beeline website (link below) or by toll free number 0604 32 in the "Settings" section.

Save automatic settings on your phone. Reload your mobile phone , to do this, turn it off and then turn it on. Make sure in the parameters mobile internet it is the settings that are selected as active Beeline GPRS.

2.1. Order receiving SMS with automatic settings MMS for your phone on the site
mobile.beeline.ru .

2.3. Order receiving SMS with automatic Beeline GPRS settings for your phone on the website mobile.yandex.ru .

3. Manual configuration of the phone for MMS, Wap, GPRS, Internet.

Manual Beeline settings for receiving and sending MMS, settings for Internet access via WAP or GPRS.

3.1. GPRS Internet configuration.

In order to configure the phone manually. You need to do the following. Open the menu in the phone "Settings" and select the item with the Internet connection parameters. Depending on the phone model, this item may be called "Connection", "Internet Options" or "Data Transfer". Enter the parameters shown below.

Beeline Internet
http://wap.beeline.ru
GPRS
internet.beeline.ru
beeline
- Password: beeline

3.2 Setting up sending and receiving MMS.

Find the item on your phone Setting up MMS and enter the following parameters:

Profile name: Beeline MMS
- Home page / Message server: http: // mms /
- data channel (Data Bearer): GPRS
- Access point name (APN): mms.beeline.ru
- IP address: 192.168.094.023
8080 (or 9201 for WAP phones 1.x)
- User name: beeline
- Password: beeline

After manually setting up your phone you need to send a test MMS message any addressee (for example, yourself). This is necessary to register you in the Beeline network as a user of the MMS service.

Show more

3.3. WAP connection setup.

Important, configure Internet access via WAP compound not recommendedsince Until recently, the cost of WAP traffic compared to GPRS traffic was several times more expensive. This information can be clarified in the Beeline company by calling the short reference number 0611 Beeline. The call is free. It is best to access the Internet via a GPRS connection, for this set up your phone according to point 3.1.

To set up a WAP connection, you need to go from the main menu of the phone to the settings section and create a new access point with the following parameters:

Profile name: Beeline WAP
- Home page: http://wap.beeline.ru
- data channel (Data Bearer): GPRS (or CSD for WAP 1.x phones without GPRS support)
- Access point name (APN): wap.beeline.ru (not specified for WAP 1.x phones without GPRS support)
- Switching number: 0671 (indicated for WAP 1.x phones without GPRS support) - IP address: 192.168.017.001
- Port number: 8080 (or 9201 for WAP phones 1.x)
- User name: beeline
- Password: beeline

The names of the menu items and the number of settings may depend on your phone model.

If when creating profiles Beeline Internet, Beeline MMS, Beeline WAP These profiles are already in the phone settings, then you do not need to re-create them, but you need to go to these profiles and check the correctness of the settings.

P.S .: After receiving the settings, you must make surethat your tariff plan allows access to the Internet, as well as sending MMS messages. You can find out about this by calling the Beeline help desk at a free number 0611 .

How to order and get free automatic Internet and mms settings for beeline on your phone. How to set up a phone to access the Internet, set up mms on a beeline.

One of the key mobile messaging services, which is responsible for the transfer of multimedia files, has become the MMS. This abbreviation cannot be deciphered in the Russian version, since it is just a tracing of the English version: MMS - Multimedia Messaging Service. The size of such a message, into which you can insert an image, animation, audio track, does not exceed one megabyte in the Beeline network and 500 Kb for sending to users of other operators. Otherwise, several mms are sent. In addition, you can send text up to a thousand characters in mms.

Usage cost

• “Beeline” clients can start using the mms exchange service absolutely free of charge. The cost of an outgoing message depends on the specific tariff plan and varies from one and a half rubles to 6.6. So, the lowest bar corresponds to the tariff "Monster of communication +" (1.5 rubles), 3.95 is to send one MMS in the "First Children's". For all users of other plans from the Beeline operator, the current price is 6.6 rubles.
• No subscription plan is charged, meaning the service is generally free.
  As part of using tariff plans from "Beeline" you can send multimedia messages to customers of all operators Russian Federation, as well as beyond its borders. Moreover, the cost does not exceed the domestic one.
• You can receive MMS within the "Beeline" network absolutely free of charge.

How to activate the service: configuration steps

In order for the connection to be successful and, as a result, in a certain situation, the user was able to timely send the corresponding photo or melody, several points should be observed:

1. It is necessary to find out if receiving and sending mms is supported in a particular device. For owners of modern smartphones, this item is redundant, but those who have old-generation phones should pay attention to it. You can check the availability of the function on the device packaging. If it is not there, you need to find the corresponding item directly in the phone in the "Settings" section.
2. It is necessary to connect the "Package of three services" from "Beeline", which includes the ability to use not only mms, but also mobile GPRS. To do this, directly from the gadget, you need to dial the command: * 110 * 181 #.
3. Next, you need to make the necessary settings in the device. This can be done not only on the official website of the "Beeline" company, but also by calling 0604 32. If you choose the last option, you will need to go to the "Settings" section during the call. If you give preference to setting up through the Beeline website, you will be prompted to select a gadget brand, then a specific model. After that, settings are provided for each individual device, which must be registered manually.
4. When all the basic steps are completed, you need to restart your phone. It is very easy to check if the settings are correct - you just need to send your first mms.

Subscribers have to independently request MMC Beeline settings since the operator cellular communication disabled automatic connection. Fortunately, it is quite easy to do it yourself, even if your phone model is designed for manual data entry.

What is MMS

MMS is a multimedia version of SMS. In addition to text, it can be used to send photos, audio recordings, short videos. The size of such a message is limited to 500 KB, which is equal to 1000 characters text message... The price of such a service depends on the tariff plan used by the subscriber. However, most often it is about 8 rubles, and in some, a package is given to use MMS for free. You can find out how much it costs to send one multimedia message within Russia and abroad by calling hotline and on the website. One of the advantages of MMS is the ability to send a message to email.

Unfortunately, this type of communication has not become as popular as SMS, so Beeline continues to include it in the Three Servants package, but it sends MMS settings only upon request.

In some cases, the data comes in the form of messages to the phone. The configurations must be run and saved, after which the phone must be rebooted. However, more and more users are faced with the need to manually configure MMS in Beeline.

Automatic tuning

Before connecting the MMS, you need to make sure that the phone is actually not currently working in this mode. You can check in two ways:

• on the hotline 0611 (88007000611);
• in Personal account on the Beeline website or in mobile application in the section "Services".

If the function is not active, then you can connect MMS to Beeline using the USSD command * 110 * 181 # or via the link in the LC. The first step is to get the so-called package of three services, which also includes Internet settings. As soon as you get access to this package, you can proceed to further actions.
You can set up MMS on Beeline only taking into account the phone model that will be used to receive and send messages. In mobile mode, you can call the 060432 line, where, using the prompts of the autoinformer, the subscriber chooses his own device and sends himself the settings.

The cost of the message, which is requested to install MMS, is 0, the same as the cost of setting up in the company's office.

Setting up MMS via the Internet works in a similar way. On the page with the connection of the service, the phone model is selected, the number is entered and data for a specific gadget is sent to it. In case of automatic settings, it is enough to save everything and restart the device.

Manual MMS configuration

Sometimes not automatic settings are sent to the smartphone, but text instructions on how to set up MMS on Beeline. You need to follow this plan, which is usually not very difficult. One has only to create an MMS profile and register certain fields there:

manual settings for MMC

Unspecified fields are left blank. For those who have had to set up the Internet on their own, this instruction will seem very familiar. However, if these actions cause difficulties for the subscriber, it is worth contacting the employees of the Beeline service office, who will help set up MMS on Beeline. They will also tell you how much it costs to send messages.