ISO Orion includes 116 instruments and devices and 33 software products, but the principle of building the system is easy to understand using a simple three-level model.

At small in size or complexity objects, ISO "Orion" is limited to the use of one or several devices in an autonomous mode of operation (lower level). In this case, the capabilities of the system are determined by the functionality of each device. So it is possible to implement security and fire alarm systems, simple access control and fire alarm systems, local automation of gas and powder fire extinguishing. Integration in this case is limited to the simple transmission of signals from one system to another using the relay outputs of the instruments. The user can control such systems directly at the installation site using built-in or plug-in devices: buttons and readers. All devices, as a rule, are mounted in one protected room - at a security post or in a control room.

To switch to a "distributed" security system, the middle level of ISO "Orion" is used, in which a control panel (network controller) and auxiliary devices are added to the devices of the lower level: keyboards, relay modules, display units, etc.

The control panel performs two main functions: 1) hardware integration of individual devices and devices using a single system RS-485 interface and communication lines; 2) information integration of equipment using a common information exchange protocol. Additionally, the control panel has a built-in keyboard and indication used by the user for centralized remote control of the security system. Communication lines due to various configurations ("bus", "tree", "ring") expand the topology of simple radial alarm loops and allow to increase the distance from the guard post to the extreme detector by several kilometers. The user uses auxiliary devices to control the system and obtain the necessary information from it in the desired form anywhere in the facility. To ensure high reliability, the main instruments of the Orion ISO have a function of switching to autonomous operation in the event of a communication failure with the control panel.

Thus, the average level of construction of the Orion ISO is characterized by the following qualitative features:

• all devices communicate with the control panel
• devices with different functions without loss of interconnection can be spaced across the territory of the facility, mounted in separate rooms (control rooms) or in places inaccessible to outsiders (ceiling space)
• the possibilities of managing the burglar alarm are expanded by combining alarm loops into groups (security sections)
• a centralized key database appears in the access control system
• the number of devices and auxiliary devices in the system is determined by the capabilities of the control panel
• cross logical connections are formed between the alarm loops of one device and the relay outputs of another
• information commands transmitted over a common communication line replace relay control signals and associated connecting cables
• automated procedures for managing security sections (groups of alarm loops) and groups of relay outputs
• the integration of the video surveillance subsystem is limited to the use of relays
• integration between security subsystems operates at the level of interconnection between several events, while the system response is formed using standard control algorithms set in the control panel

The upper level of building ISO "Orion" is fully based on the use of system software. The software is usually used in the following cases: 1) the facility requires the organization of a round-the-clock security post or control room with automated workstations; 2) the facility is so large that there is not enough equipment serviced by one control panel to equip it, and it is required to combine several local systems. The use of software, as a rule, implies the use of the local area network of the facility, which significantly expands the territorial topology of the security system. The local network allows you to organize many workplaces with different functionality throughout the site.

The upper level of the Orion ISO construction is characterized by the following features:

• several local ISO "Orion" with their network controllers are combined using a computer, have a consolidated database and general interaction
• mass arming and disarming procedures are performed in one click or automatically - according to scenarios and time schedule
• the number of users in the access control system reaches six digits, limited only by the size of the Database table
• access control supports complex algorithms for passage and accounting
• flexible reporting system fully meets the needs of security and operations
• to the integration capabilities of the video surveillance subsystem at the relay level, interaction at the software level through the local network is added
• it becomes possible to programmatically interact with engineering systems
• control scripts are expanded to the level of a set of commands that are launched automatically by events or by operator's command

AWS "Orion Pro" is a software package for the hardware-software complex ISO "Orion", which implements security alarm systems, access control and management, video surveillance, automatic fire-fighting systems, coupled with engineering systems of objects - the system is quite interesting. Once I had to deal with it and during the installation some nuances arose, which will be considered in this note.

1. Installing the server part "Orion Pro"
2. Installing "Orion Pro" on the client.
3. Connection of the Orion Pro client to the server.

We have two PCs.

One has Windows Server installed (it will act as a server, respectively), and the second has a regular user Windows (operator's / guard's PC).

The first thing to do is to insert the keys with Orion licenses into the PC and download the program itself from the site.

1. Installing the server part "Orion pro"

Install "Orion Pro" on the server by checking the box when requesting to install MS SQL Server (only if MS SQL was not installed earlier). The installer will download and configure MS SQL Server itself and no action is required.

All other installation items can be left as default.

It is better to set directly from the properties of the server, monitor, server control, etc. run as administrator by default.

We check the connection to the server. To do this, run "Server Management" (default password is 73173100) and the window should be "Connection: established".

Then we launch the "System Shell" and start adding data to the DBA (Database Administrator).

If swears about connecting to the database

and an error crashes after starting the shell (as I had)

Then you need to do the following.

We find in the manager of the central server in the DB menu the item "Attach the database to the server".

Click "Forward".

In the field "Name of the alias of the connected database" enter any name in English. layout, you can leave the default - Orion.

In the "Database file name" field, select the file in the C: \\ ORIONBASE \\ MSDE2008 \\ "or orion1202.mdf or orion1201.mdf folder to choose from.

As a result, there should be no messages or errors.

We go into the DBA and create a client computer. We need to enter the client's ip-address, select the settings and its name.

This completes the installation and configuration of "Orion Pro" on the server.

NVP "Bolid" (stands for research and development enterprise) is a domestic company, one of the leaders in the industry of technical security systems production. For 25 years of presence in the market of technological services, it has become a recognizable brand, and its products are in demand in the foreign market.

Currently, the company produces, develops and supplies software and equipment for security, alarm and fire alarm systems, access control systems, fire automation, video surveillance, building and structure dispatching and vehicle control.

The company works in constant collaboration with production partners and consumers. Direct communications make it possible to take into account all their wishes to the maximum extent, anticipate changes in market requirements and take preventive measures to meet new demand conditions. During its existence, the company has managed to assemble a close-knit team of highly professional employees who can resolve issues of any complexity.

Integrated system "Orion" - description and capabilities

Today the integrated security system "Orion" is a whole complex of instruments, devices and software that are interconnected. Thanks to this, it is possible to build a security system of almost any complexity, from a small facility to a network of large industrial and military facilities scattered over a large area from each other.

The most important principle of such a system is modularity. You only use the devices that you really need. If it is necessary to equip the object with only burglar alarms, please use only security devices. As soon as the system needs to be expanded by adding access control and fire alarms, it can be done without any difficulty. Most importantly, at the first stage, you do not need to buy any extra devices and wires. You buy only what you need.

Benefits of using ISO "Orion"

• You can implement all currently existing security systems - burglar alarms, fire, access control, video surveillance, management of engineering systems, etc.
• The size of the object doesn't matter. For a small object, you can use one universal device, for medium and large a number of devices, different in functionality, but combined into one system;
• The lowest cost of an integrated security system on the market at the rate of 1 alarm loop per 1 m2 of protected area;
• Significant savings in the cost of cable and equipment due to a large number of devices and one RS-485 communication line;
• Reliability is guaranteed by 25 years of production experience and a large number of facilities where ISO Orion works;
• More than 90% of all design and installation organizations have experience with the equipment of this system.

ISO "ORION" functionally unites 116 devices and instruments and 33 software products, but for any variant a universal principle of system construction is used:

• Upper level... Several local ISO Orion, with their network controllers, are combined into a single database using a PC;
• Middle level... The control panel, also known as the network controller, integrates the entire system, and the devices exchange information with it;
• Lower level... These are mainly universal devices that support an autonomous mode of operation.

The structure of the ISO "Orion" system

On small-sized objects, the burglar alarm system at the Bolid base is limited to the lower level. The more complex the object, the higher the level of system construction.

A group of devices with radial stubs (not an addressable system)

The first group of devices is devices with radial loops, to which non-addressable detectors of any manufacturer can be connected. Below are some of them:

The main types of radial security loops in the Bolid alarm

For all devices, several types of security zones can be programmed, depending on the connection diagram of the sensors and the functions they perform.

Below are the most commonly used types:

System central controllers

Central controllers, they are also control panels, are used in the ISO "Orion" system to unite all devices via the RS-485 interface into a single network, as well as for centralized control of the system. One remote control can control up to 127 devices, all operation logic is programmed into it using the free program Pprog. There are the following types of controllers:

Information exchange interface

The RS-485 interface is used to exchange information between the security devices of the Bolid company; it is a standard interface used in many systems of other manufacturers. At the same time, the "communication" protocol itself is closed; devices with an RS-485 interface from other manufacturers will not be compatible with ISO Orion-based alarms.

The RS-485 interface consists of three wires, A and B, and the third unites the zeros of the panels. The interface is half-duplex, i.e. the A-B line is receiving and transmitting. Its maximum length is 3 km, if you need more, you can use repeaters. If the length of the RS-485 line is more than 100 meters, it must be laid with a twisted pair.

For stable operation on the first and last device, inside the rs-485 interface, terminating resistors - 620 Ohm must be installed. On most instruments, this resistor is jumper activated next to the A-B terminal block.

Addressable signaling

In addition to devices with radial stubs, the Bolid company produces a two-wire controller S2000-KDL, which allows you to connect address sensors. In addressable signaling, the location of the violation is determined by the location of the detector and its sensitivity zone, which significantly increases the accuracy.

127 addressable security, fire and technological detectors can be connected to one S2000-KDL. The advantage is that we can run only two wires, which provide power and data transmission, through all rooms, and at the same time we will know the exact location of each sensor.

Now the following addressable detectors are produced:

• S2000-IR... Infrared optical-electronic addressable detector, volumetric type. Available in several versions, with animal protection and an additional “corridor” type lens;
• S2000-SHIK... Infrared room with narrow action, such as "curtains" for protecting doors and window openings;
• S2000-PIK... Infrared volume, ceiling version;
• S2000-ST... Glass break sensor;
• S2000-PIK-ST... One housing combines two types of detectors, reacts to penetration and glass breakage, ceiling version;
• S2000-B... Vibration sensor designed to protect walls, ceilings, floors, all kinds of storage facilities, safes and more;
• S2000-STIK... Combined wall-mounted detector. It combines acoustic and optoelectronic detection principles. It occupies two addresses;
• S2000-SMK... Magnetic contact, used to protect window and door openings;
• S2000-CT... Alarm annunciator for alarm signaling, otherwise by a simple panic button;
• S2000-SP2... Signal-start relay block;
• S2000-AR1,2,8... Addressable expanders for one, two or eight zones. It must be remembered that the expander does not supply power to the conventional sensor;
• Insulator Breeze... Allows you to isolate closed sections, after removing the short circuit, the lines are automatically restored.

On medium and small objects, the addressable burglar alarm Bolid is quite convenient.

Dialers and Transmitters

Dialers and notification transmission devices are used to notify the system owner about any events - arming / disarming, alarms, service messages. In addition, they can transmit signals to the control panel of the security company.

The following models are used:

Power supply

All the main panels of the Bolide are universal, they can be powered with voltage from 10.2 to 28.4 V. Each board provides two inputs for power supplies for 12 and 24 volts.

The company produces its own backup power supplies, some of them are equipped with an RS-485 interface, others have relay outputs. For example, models RIP-12 RS, RIP-12-3 / 17P1-P-RS, RIP-24 isp.01P and others.

The creation of security systems in most cases involves the organization of the operator's workplace, who will constantly monitor and monitor all devices and devices.

The Bolid company provides us with a wide selection of software designed to organize workplaces with various capabilities. The required set of software is selected separately for each object, depending on the system configuration and the required additional user functions.

AWS "Orion"

For the implementation of one workplace, the most relevant will be the use of the software AWS "Orion", which is produced in several modifications -,. The version number indicates the maximum number of system devices that the software can control - 4, 10, 20 and 127, respectively. AWS "Orion" consists of software modules "Operational task", "Database administrator", "Report generator", "Time tracking", "Personal card", each of which performs its functions in the system.

The "Operational task" module allows you to monitor the state of all devices and zones on the floor plans, manage the arming and disarming of zones, implement flexible system control scenarios, organize interaction with third-party video systems, etc.

The "database administrator" is used to create and manage the system database, which records all devices with their addresses and placement on plans, control scenarios, personal data and work schedules of personnel, passwords and codes of electronic keys indicating the access level.

The software module "Time Tracking" allows you to keep track of the time worked by employees, track violations of the work schedule, display a report for one or more employees at the same time, export data to HTML or Excel.

"Report generator" allows you to generate reports on various events in the system with the ability to import into Excel / HTML or print.

"Personal card" allows you to carry out photo verification of personnel and visitors with the display of a personal card. The software also includes several software utilities designed to draw the layout of the object, check the operability of loops, archiving and cleaning the database, etc.

Such a set of functional components provides ample opportunities for the workplace, allows for full control of all devices in the system.

AWS "UABD"

This software is used to organize a remote workstation with the ability to manage the Orion AWS database using the TCP / IP protocol over a local network. allows you to enter devices and system devices into the database, place them on the object's layouts, read and edit their configurations of the control panel and controllers, and program control scenarios with reference to a specific time or events. It is also possible to enter personal data of employees and visitors with further printing of passes, to enter passwords and identifier codes into the database with the assignment of certain access rights to each of them. All the information entered is loaded into the Operational Task of the Orion Workstation. Only one can be connected to one Orion AWS.

AWS "NSO"

URM "Orion Video"

AWS "Orion Pro"

AWS "Orion-Pro" is used mainly for managing large distributed systems, where it is necessary to create several jobs with different functionality. Unlike AWS "Orion", this system consists of modules that are supplied separately and can be installed either on 1 or on different PCs. All workplaces of the "Orion Pro" workstation are connected by a local network.

Orion Pro workstation software modules

1. Server "Orion Pro"

2. Database administrator "Orion Pro"

3. Monitor "Orion Pro"

4. Operational task "Orion Pro"

The module is an obligatory component of the Orion Pro workstation and consists of 2 separate programs - the Polling Core and the Monitor. Since the system module was discussed above, let's dwell in more detail on the Polling Core module. This module interrogates all devices in the system connected via RS-485, launches system control scripts, controls arming and disarming, organizes the process of interaction of other workstations with the system's devices. System module The polling kernel is installed on absolutely all PCs that must work with devices at the physical level. Up to 127 network controllers / or control panels, as well as up to 32 biometric readers can be connected to the COM or USB ports of the PC. It is also possible to connect devices via an Ethernet network through the S2000-Ethernet interface converter, but the speed of the system is significantly reduced.

As a rule, the Polling Engine works in conjunction with /, backing up each other. That is, if the Polling Core is disabled, the network controller takes over control, which, after restoring the PC's operation, transfers control rights and all the accumulated information to it. It is also possible that the interrogation of devices is carried out by the console /, and the Polling Core receives all the information from the console. This scheme allows you to significantly relieve the PC in the case of a large number of devices in the system connected to several consoles /. The work of the Polling Core with devices can be performed without the use of network controllers /. In this case, when the Polling Core is turned off, the devices work autonomously, and when turned on, they transmit to the PC information about all events that have occurred during the shutdown. Operational task "Orion Pro" produced in versions, and designed to connect 4, 10, 20, 127, 512 and 1024 devices of the Orion system.

5. Report generator "Orion Pro"

This module is designed to create reports on events that occurred in the system for a certain period of time. A large number of built-in filters allow flexible customization of reporting documentation taking into account the category of events, time, system elements, etc. To simplify work, the ability to create report templates has been implemented. The created files are exported to the most common formats - Word, Excel, HTML, PDF, etc. The report generator has an intuitive menu and will not cause difficulties even for novice users.

6. Accounting of working hours "Orion Pro"

Orion-Auto software

Information system AWP "S2000"

This software, as a rule, is installed on the PC of a maintenance engineer or a service engineer and allows monitoring the events of ISO "Orion" with the subsequent generation of reports. It is used in conjunction with the remote control / or control panel operating autonomously. displays the state of devices and zones, keeps a log of events with the ability to select by specified filters, allows you to print reports or export to HTML. In this case, the PC can work continuously, for example, at the fire station of a building, or periodically, when viewing events by a service engineer or company director. In addition, it is possible to display system events on several workstations. This type of application is especially relevant for medium and large facilities, where the fire and security observation posts, where it is necessary to display the operation of the corresponding systems, are located in different places.

Time tracking for 1C: Enterprise 8

Software URV for 1C: Enterprise 8 is used to organize the accounting of employees' working hours based on the 1C: Enterprise technological platform (8.1, 8.2, 8.3). The program receives information about the passes from the controllers, after which, based on the data received, it keeps track of the time worked by employees. The controllers can communicate with the server via Ethernet and Internet networks, which makes it possible to monitor the systems of remote branches of enterprises. The software also allows for photo verification of employees and visitors of the facility, displaying photos and personal data. Thanks to the open source code, the user can make his own adjustments to the calculation algorithms or develop his own reports.

The basic software package is a mandatory minimum for the organization of work and includes licenses for 1 access controller, 1 workplace with photoverification and an unlimited number of places without photoverification. If we need to organize a system with photo-verification of employees at the same time in several workplaces, for each of them a license is additionally purchased for. To expand the system with additional controllers, in addition to the basic software package, you must purchase, isp 32) and 16 () controllers.

The Orion integrated security system is a combination of hardware and software for organizing security and fire alarm systems, access control, video surveillance, automatic fire extinguishing, as well as for creating control systems and dispatching facilities.

The system provides

• Collection, processing, transmission, display and registration of notifications about the state of the security, alarm and fire alarm loops;
• Access control and management (control of barriers such as barriers, turnstiles, gates, gateways, doors);
• Video surveillance and video control of protected objects;
• Control of the object's fire automatics;
• Interaction with engineering systems of buildings;
• Modular structure for optimal equipping of both small and very large distributed objects;
• Protected communication protocol over the communication channel between the devices.

Functional subsystems of ISO "Orion"

Burglar alarm, fire alarm, automatic fire extinguishing system, access control, video surveillance and video control, management of engineering systems of buildings, collection and processing of information.

The principle of building ISO "Orion"

Three levels of building the system: lower, middle and upper level.

Qualitative attributes of the lower level

On small in size or complexity objects, ISO "Orion" is limited to the use of one or more devices in an autonomous mode of operation (lower level). In this case, the capabilities of the system are determined by the functionality of each device. So it is possible to implement security and fire alarm systems, simple access control and fire alarm systems, local automation of gas and powder fire extinguishing. Integration in this case is limited to the simple transmission of signals from one system to another using the relay outputs of the instruments. The user can control such systems directly at the installation site using built-in or plug-in devices: buttons and readers. All devices, as a rule, are mounted in one protected room - at a security post or in a control room.

To switch to a "distributed" security system, the middle level of ISO "Orion" is used, in which a control panel (network controller) and auxiliary devices are added to the devices of the lower level: keyboards, relay modules, display units, etc.

The control panel has two main functions:

1. Hardware integration of individual devices and devices using a single system RS-485 interface and communication lines;
2. Information integration of equipment using a common protocol of information exchange.

In addition, the control panel has a built-in keypad and indication used by the user for centralized remote control of the security system. Communication lines due to various configurations ("bus", "tree", "ring") expand the topology of simple radial alarm loops and allow to increase the distance from the guard post to the extreme detector by several kilometers. The user uses auxiliary devices to control the system and obtain the necessary information from it in the desired form anywhere in the facility. To ensure high reliability, the main instruments of the Orion ISO have a function of switching to autonomous operation in the event of a communication failure with the control panel.

Qualitative characteristics of the average level

The average level of construction of ISO "Orion" is characterized by the following qualitative features:

• All devices carry out information exchange with the control panel;
• Devices with different functions without loss of interconnection can be spaced across the territory of the facility, mounted in separate rooms (control rooms) or in places inaccessible to outsiders (ceiling space);
• The control capabilities of the burglar alarm system are expanded by combining alarm loops into groups (security sections);
• A centralized database of keys appears in the access control system;
• The number of devices and auxiliary devices in the system is determined by the capabilities of the control panel;
• Cross-sectional logical connections are formed between the alarm loops of one device and the relay outputs of another;
• Information commands transmitted over the common communication line replace relay control signals and associated connecting cables;
• Automated procedures for managing security sections (groups of alarm loops) and groups of relay outputs;
• Integration of the video surveillance subsystem is limited to the use of relays;
• Integration between security subsystems operates at the level of interaction between several events, while the system's response is formed using standard control algorithms set in the control panel.

The upper level of building ISO "Orion" is fully based on the use of system software.

The software is usually used in the following cases:

1. The facility requires the organization of a round-the-clock security post or control room with automated workstations;
2. The facility is so large that there is not enough equipment serviced by one control panel to equip it, and several local systems need to be combined.

The use of software, as a rule, implies the use of the local network of the facility, which significantly expands the territorial topology of the security system. The local network allows you to organize many workplaces with different functionality throughout the site.

Qualitative attributes of the top level

• The upper level of the Orion ISO construction is characterized by the following features:
• Several local ISO "Orion" with their network controllers are connected by a computer, have a consolidated database and general interaction;
• Mass arming and disarming procedures are performed in one click or automatically - according to scenarios and time schedules;
• The number of users in the access control system reaches six digits, limited only by the size of the Database table;
• Access control supports complex algorithms for passage and accounting;
• Flexible reporting system fully satisfies the needs of the security and operations department;
• To the possibilities of integrating the video surveillance subsystem at the relay level, interaction at the software level through the local network is added;
• There is a possibility of programmatic interaction with engineering systems;
• Control scenarios are expanded to the level of a set of commands that are launched automatically by events or by operator command.