What is MSI.DLL? MSI.DLL Windows Installer File It is known to generate error messages when installing a program that may occur if Windows Installer files on a computer do not match, or due to corruption or registry damage.

Delete MSI.DLL error in Windows

Goal msi.dll

Ayle MSI.DLL required to install packages Microsoft Installer. (MSI). If this file is deleted, Windows Installer will not work.

In this article we will discuss an instance of MSI.DLL error on a computer with windows system And her decision.

MSI.DLL Error in Windows

When you try to install any Windows Installer program on a Windows computer, you can get an error message similar to what is presented here:

"Msiexec.exe file is associated with missing MSI.DLL: 222 exports."

After pressing the button OK.The other error message appears similar to that mentioned below:

"I can not run C: \\ Windows \\ System \\ Msiexec.exe device connected to a system that does not work."

Cause of error

This problem occurs if Windows Installer files on the computer will try to update the Windows file installer.

Resolution

When the problem described above arises, the first thing you need to do is restart the computer and try again. windows program Office. If Windows Installer raised files, or files are not copied to the correct location. Instead, they first copied to a temporary folder. Only when you restart your computer files are copied to the appropriate folder. To solve this error message, follow these steps.

Task 1 - Download Installer Windows Update

1. Click the link button and click Download located near Instmsia.exe..
2. Save File on your desktop.

Task 2 - Rename Windows Installer files

1. Go to the menu Start and select Turn off computer.
2. Next, click Restart the computer in MS-DOS modeand then click OK. .
3. Enter the following commands on the command prompt and press the Enter key after each command to execute them. cD System
   ren Msi.dll MSI.old.
   ren msihnd.dll msihnd.old.
   ren msiexec.exe msiexec.old.
   eXIT
4. Restart Windows.

Task 3 - Run Windows in Safe Mode

1. Press the button Start and select Turn off computer.
2. Next, click Reboot and click OK..
3. Press and hold the button Shift.When the window is rebooted.

Task 4 - Installing Installer Windows Update for Windows

1. Double-click on the file Instmsia.exe.saved on the desktop.
2. Next, follow the instructions on the screen to complete the installation process.
3. Finally, restart the computer.

If the registry sets questions that dLL errors, such as msi.dll errors?

Yes, he do it because the registry is actually spoiled or damaged, it is often the cause of a common DLL error. Records related to DLL files are stored in the registry. You can receive repetitive DLL errors if the records related to DLL files are damaged or disappeared. Corrections of DLL errors, such as MSI.DLL errors, as a result of which the registry issues issues. Scan the registry using an effective registry cleaning program such as Reggenie. it powerful toolwhich allows you to execute a custom registry scan to correct DLL errors.

MSI.DLL is a security file?

Yes, True MSI.dll is a security file from Microsoft. However, several instances of malicious programs use the file named MSI.dll. To determine MSI.dll on your computer, this is not a threat system, scan the entire computer with the Windows system using reliable and efficient security tools.

Errors When installing applications from files with extension. MSI is one of the manifestations of the Windows Installer service (in the Russian-language version - Windows Installer). Such a phenomenon face users of all versions of this OS, with the exception of the earliest. Until now, the problem with the installer is one of the frequent reasons for which users are solved on reinstalling the system. Let's try to figure out how to avoid it. The reason for Windows Installer does not work, maybe the following:

• viral infection, and the removal of the virus does not always solve the problem;
• incorrect installation of Windows updates;
• the protection software fails when, instead of blocking one suspicious MSI file, the installation service is blocked entirely;
• changes in security policies on a computer;
• damage system files or registry for reasons not related to viruses (removal of installer components, unqualified edit registry, "curve" software, malfunction hard disk etc.).

Check the integrity of the Windows Installer structure

Windows installer is represented by the following components:

• c: \\ Windows \\ System32 \\ Msiexec.exe file - directly by the installer appointment;
• c: \\ Windows \\ System32 \\ MSI.DLL file - Windows Installer library;
• the MSISERVER service, the parameters of which are stored in the Registry section.

Before diagnostics, it is important to make sure that there are both of these files in the system, which in the registry has the above section and its parameters have normal values \u200b\u200b(values \u200b\u200bcan be viewed in the registry of a similar, working system). Also open the list of services (click Windows + R and enter the "Open" line to "Run" the Services.msc command). Find the Windows Installer and make sure it starts. In the absence of files, copy them from another system of the same version or from the installation disk. If there is no registry key or damaged - also transfer it from the working system. To do this, on a good computer, run the registry editor (C: \\ Windows \\ regedt.exe) and find the above section. Expand right click context menu MSISERVER folders and click Export. Save the file in format.Reg and transfer it to a problem machine. Click twice this file and confirm your consent to add data to the registry. Restart the computer. If the MSISERVER service is still not started, check if the RPC service works ( Remote call procedures) from which it depends. You can re-establish the installer files and restart the service using a set of special commands, on the command prompt. For convenience you can create command file.: Insert a set of actions in notepad and save both with the extension.Bat. To start the file, just double click on it. To make changes to act, click on the desktop and press F5.

Check the security settings and access rights

Windows Installer may not work and due to the fact that it blocks the protective software or the operating system does not have the necessary rights. To begin with, we will deal with the software. If you have installed antivirus - temporarily disconnect it. Methods for disconnecting each product, but most often this is done through the antivirus icon context menu in the system tray. Now we will deal with rights. Open the msiexec.exe context menu and expand its properties. Check the list of groups and users on the Safety tab. Among them, there must be a "system" and the "TrustedInstaller" service, and the last one must have full access to the file and be its owner. The system must have the rights to read and read and execute. The TrustedInstaller service first appeared in Windows Vista.So in Windows XP full access must be provided with the system. Everything that is written below relate to versions released later than XP. To check who owner Msiexec.exe, click the "Advanced" button on the same tab. In the next window, discover the "Owner" tab. Make the owner of the TrustedInstaller service if something else is specified as it. If you do not have it in the "Change Owner to" list, click the "Change" button, and next - "Other users and groups". Enter TrustedInstaller in the field "Enter the names ...", click "Check Names" and OK. Return to the previous window. On the "Existing Permissions" tab, assign TrustedInstaller and the system necessary rights. Exactly the same security settings must be at the MSI.dll library. Now check if there are no restrictions for the user "System" to access the following:

• system disk (usually drive C);
• temporary folders (this is C: \\ Windows \\ TEMP and C: \\ Users \\ Current user \\ APPDATA \\ TEMP);
• c: \\ Config.msi folder;
• the folder where the MSI file is located from which you are trying to install the program.

All these objects system must provide full access. It is also done as we disassembled above. After these operations, in most cases, the problem with the installer is successfully solved. If our tips did not help you, the reason for the failure lies in something else and experts should already be dealing with it.

Introduction

Our Windows installers contain a complete installation package of the client part of the program (MSI) (assembled based on Windows Installer V2.0). Network Installation Instructions suggest that the user is familiar with the basics of Windows Installer, in particular, with the deployment of MSI files. This package can be used with any operating system Windows supporting Windows Installer V2.0.

Installation on the network server

1. Make a double click on the resulting file ( Yenka_setup_ (msi) .exe)
2. Install this package to the folder general access to your programs.
3. Attention : The program must be activated before deploying a package on the network. To do this, run "yenka.exe" from the folder to which you installed the program (<путь установки>\\ Program Files \\ Yenka \\ Software \\ yenka.exe) and follow the activation instructions.

Installation

Installing MSI package using command line

1. In the commands field, enter the string:
   mSIEXEC / I "<путь к MSI файлу> \\ Yk.msi "
   Where:<путь к MSI файлу> This is the path to the Windows Installer package file. For example, a string may look like this: msiexec / I "C: \\ Program Files \\ Yenka \\ yk.msi"
2. Press the Enter key
   Attention: Windows service Installer will raw installation in the "invisible" mode, using the key "/ Q". For example: msiexec / i "C: \\ Program Files \\ yenka \\ yk.msi" / q. To show the installation process indicator, you can use the key " / QB.".

Deleting MSI package using command line

1. In the Start menu, click "Run ..."
2. In the commands field, enter the string:
   msiexec / x "<путь к MSI файлу>\\ Yk.msi "
   Where:<путь к MSI файлу> This is the path to the Windows Installer package file.
3. Press the Enter key

After mSI installations Afterburner, users often observe that the sliders, which in theory should move, stand on the minimum or maximum values \u200b\u200band it is impossible to move them. This is perhaps the most popular problem when working with this software. We will deal with why the sliders do not move in MSI Afterburner.?

After installation mSI programs Afterburner, this slider is always inactive. Made it for security purposes. In order to correct the problem, go to "Main settings" and put a tick opposite "Unlock voltage". When you click "OK"The program is restarted with the consent of the user to make changes.

Video card driver

If, the problem remains, then you can experiment with video adapter drivers. It happens that the program works incorrectly with obsolete versions. In some cases, there may be no new drivers. See and change them can be entered in "Task Manager Control Panel".

The sliders stand at the maximum and do not move

In this case, you can try to correct the problem through the configuration file. To begin with, we are determined where we have a folder of our program. You can press the right key on the label and see the location. Then open "MSI AfterBurner.cnf" Using notepad. Find recording "EnableUnofficialOrcLocking \u003d 0"and change the value «0» on the "one". To make this action, you must have administrator rights.

After that restart the program and check.

The sliders are at a minimum and do not move

Go to B. "Main settings". At the bottom we put the mark in the field "Unofficial overclocking". The program will warn that manufacturers are not responsible for the consequences of changes in the map parameters. After restarting the program, the slider must be active.

Power Limit and Temp sliders are not active. Limit.

These sliders are often not active. If you tried all the options and helped nothing, it means that this technology Just not supported by your video adapter.

The video card is not supported by the program.

MSI Afterburner Tool Created only to overclock the cards AMD. and NVIDIA. It makes no sense to try to overclock any sense, the program will simply see them.

It happens that cards are maintained partially, that is not all functions available. It all depends on the technologies of each particular product.