Proper configuration of the MSI Afterburner program. How to use the program MSI Afterburner MSI Afterburner does not show the temperature of the CPU

In order to return all the paints of life and feel again how your computer starts new game At high settings, it is necessary to overclock such a program as, for example, MSI AfterBurner. "How to use it?" - Quite a logical question. For an answer, a small explanation is necessary.

Why can video cards be accessed?

The company (conditionally NVIDIA) after the manufacture of a small batch of graphics cards conducts a test for stress resistance and overclocking values, and then simply exhibits the same stable values \u200b\u200bfor all video cards released.

The manufacturer simply cannot check each video card for overclocking resistance. It simply sets the bar on the value in which the tested video cards work correctly. And it may well be that the video card established precisely in your PC is able to demonstrate high indicators of dispersion. The indicators of the FPS increase after overclocking ranges from the game to the game: it happens, barely reaches up to 10%, and sometimes it increases with all 50%. It depends on whether you know,

Security

Naturally the question of whether it is not dangerous. After all, we will increase the indicators recommended by the manufacturer. This is not quite so. Sometimes it happens that the manufacturers themselves recommend a little accelerate a video card when they understand that they "have extended" and put too low.

Even when acceleration is not recommended by the manufacturer, it can still be performed. All modern video cards are protected by various technologies, the meaning of which is reduced to the following: when it overheats, it simply turns off and resets the overclocking values \u200b\u200bat the initial level. The same thing will happen if you overdo it and exhibit too large acceleration values. The computer will restart and reset the video cards you make.

Download and install the program

This article will tell about the MSI AfterBurner 2.3.1 program, how to use it and other aspects of work.

You can download the program on the official website, on the program page, first turning to the downloads tab.

And then click on the button next to the first program represented on the page.

During the download process, you will need to select a language, installation folder and components installed. It is recommended to install and RivaTuner Statistics Server - a program that will expand the capabilities of tracking your computer.

Interface

In order to understand how to use MSI AfterBurner, you must familiarize yourself with the interface. It consists of four main elements:

• Digital 1 shows the current CLOCK video adapter.
• Under the digit 2, you can observe the temperature and voltage indicators, even without deepening in the statistics window.
• Figure 3 marked the main part of the program responsible for overclocking.
• In the area, allocated in the number 4, there is a statistical center.

But still the main question when using MSI Afterburner: "How to overclock a video card?" Therefore, you will get acquainted with the accelerations of overclocking more objectively:

• Core Voltage (MV) - (eng. "Core voltage") - This parameter is responsible for the more energy is supplied, the higher the temperature and the more the frequencies of the video card can be raised.
• Power Limit (%) - This setting establishes the trolling protective technology threshold. In the process of the game, if a video card suddenly begins to exceed this parameter, the trolling turns on and drops frequencies to standard, and sometimes of the smaller level. People who ask how to use MSI Afterburner, and just acquainted with the program, should know that excessive excess of acceptable limits (which can be read on the official sites of the video card manufacturer) leads to problems, although often Power Limit is blocked and unavailable for editing.
• TEMP LIMIT - The parameter sets the temperature threshold after which the video card will turn on trolling, that is, it works as Power Limit, only with a temperature, not meal.
• Core Clock (MHz) - (eng. "Nucleus frequency") - the most important to overclock the slider. It is worth increasing its values \u200b\u200bcarefully, by 10-15 points, keeping and checking the performance of new frequencies in graphics applications.
• Memory Clock (MHz) - (English "memory frequency"). Taking care of overclocking, it is worth remembering that the Memory Clock is almost useless - this parameter does not affect performance without acceleration, as well as core clock.
• Fan Speed \u200b\u200b(%) - slider for adjusting the cooler on the video card.

Useful functions

It is possible to change the MSI Afterburner interface in the program. Many people like the old style of the program:

DEFAULT MSI AfterBurner V2 Skin interface is shown below.

It may seem uncomfortable that to use overclocking it is necessary to open the program every time. In this case, you can apply the Apply Overclocking AT System Startup setting. But you need to do it only in case you are confident in the performance of frequencies.

Also very convenient is the ability to save settings in profiles and further apply them to need. To do this, under Profile inscription, click on the icon and select the profile number.

Later, in order to apply the settings, just click on the number.

Under the inscription START UP is located windows icon. If you transfer it to the active mode, MSI AfterBurner will start with the operating system.

The Center for Click Statistics on the Detach button creates a separate window with data.

Conclusion

Of course, when the game gives 65-70 FPS, it makes no sense to overclock your graphic chip and increase the load on it. Another thing is when the computer has been pulling 15-20 FPS. In this case, even the increase of 5-10 frames per second will already give a significant improvement in the picture, and the acceleration of the video card is able to give this increase. Especially since it is not dangerous (as it was some time ago, when the video card could be in a literal sense to burn), and sometimes recommended, even if you do not know how to use MSI Afterburner.

The MSI Afterburner program is the best one at the moment. It definitely needs to use most players - those who have no 3 GTX 1080TI in a bundle. But the main thing is to remember that the acceleration of the video card in any case leads to its faster failure, even if you know

After stopping the support of Riva Tuner, the MSI Afterburner program was released on its basis. Its functions include: acceleration of graphics processors by increasing the voltage of key elements, increasing the frequency of functioning of memory and graphics chip, adjust the speed of the cooler and monitoring current status graphics card. How to use MSI AfterBurner, and what it represents, Consider below.

Note! It is very important when operating the application intently control the temperature graphic processorIn order not to overload the device and do not bring it out of order. When using a powerful Gamer video card, it is better to take care of the new cooling system.

The utility monitors the dynamics of the temperature of the device and is able to display warnings about the exceeding critical (mounted user) the temperature of the graphic chip.

Install MSI Afterburner

Loading the program is carried out with a Russian-language version of the official resource of its support located on the link.

• After moving on it, click "Download Afterburner" and wait until the archive with the installer boots.

• Unpack a compressed file through an archiver or file manager.

Fig. 2 - Unpacking archive through 7Z

• Specify the language of the interface and click "OK".

Fig. 3 - Select Interface Language

• In the rest of the windows, click "Next," specifying the path of installation of the program.

Fig. 4 - Indicate the installation path

• Upon completion of copying and registering files, you launch AfterBurner.

Fig. 5 - Starting Afterburner after installation

After starting the program, its interface with basic data will appear on the display: the current parameters of the functioning of the graphics processor and its condition.

Stylish decoration afterburner

The default skin for the program is not very convenient to operate, so many users immediately change it more friendly. To do this, call "settings" by click on the gear icon in the center of the window.

Fig. 6 - Application Settings Button

Then go to the Interface tab and in the third subsection "Skins Properties ..." Select a more appropriate type of application design. It also indicates its language, temperature format (Celsius / Fahrenheit) and time.

In the "Main" tab, select a graphical processor subjected to configuration if a pair of video cards is used or, in addition to the integrated, is installed and discrete. If there are two identical devices running in a bundle, we note the synchronization option to their settings.

Fig.7 - Select the default video card

On the left panel there are data with numbers about the current value of the frequency of the graphics processor and video memory. The current temperature and voltage is rendered to the right.

Fig. 8 - information panel

The central part of the interface is occupied by frame with sliders, with the help of which is controlled:

• voltage on the kernel;
• capacity limit;
• boundary temperature;
• frequency of graphics core;
• memory frequency;
• the number of cooler speed.

Fig. 9 - Frame to overclock the video card

Under the frame next to the settings window of the settings window, the reset key to the factory settings is located.

Fig. 10 - button to reset the settings

The lower part of the MSI AfterBurner interface takes the monitoring window with temperature charts and other handwriting parameters.

Fig. 11 - monitoring window for key indicators

The last important element of the interface is the panel for controlling overclocking profiles and switching between them.

Fig. 12 - Presets Management

Simple voltage management rules

The program allows you to adjust the voltage on the master graphics adapter. Depending on its microarchitecture and the microcircuit used, the parameter can be displayed in Militives or percentages from the initial value.

By default, the option is deactivated on all devices except branded (from MSI). To activate it, you need to go to the main application settings and enable the appropriate option. There are several modes available here: for reference chips, for MSI chips and third-party graphic adapters.

Fig. 13 - Unlock power voltage control functions

If, after activating the parameter, it still remains inactive (painted in gray), refer to the instruction manual for the graphics processor. Most likely, AfterBurner does not support the programmable microcontroller installed on the device, even if it supports voltage control.

Improve the value of the parameter should be gradually, a few percent each time, and closely monitor the temperature and stability of the video payment after each value change. With a significant increase in the device will faster overheat and allow more errors in miscalculations, which will most likely lead to failures in the work of the entire system, the appearance of artifacts, etc.

After reprogramming the controller, which is performed by clicking on the button with the image of the check mark, it is best to carry out a stress test of the video card, for example, with the help of the Kombuster branded utility. If no deviations are noticed during the clock pair, the indicator can be increased by a few more percent or tens of units.

Fig. 14 - Application of a new configuration

If, after saving the kernel voltage value changes to the standard, try to go to the settings and select a different voltage control method, but most likely to adjust the value via MSI Afterburner will not work.

Change the peak energy consumption value

The option is not active on all devices, it works only when implementing the technology of electrical energy management in the graphics adapter.

In addition to dragging the slider, the values \u200b\u200bof the variables can be entered from the keyboard. Click on the current digit, after which the shimmering cursor appears and the possibility of entering digital values.

Fig. 15 - slider change of limit power consumption

Core frequency and video memory

Core Clock will help change the maximum operating frequency GPU. What it is higher, the more information is processed in one beat. Memory Clock is a parameter providing access to video memory frequency programming. Depending on the device, the values \u200b\u200bcan be represented explicitly or in percentage from the source.

Rapid / lower the parameters costs a few percent or a couple of dozen units at each step, conducting stress tests after each save the settings or the launch of the "heavy" game. In the second case, it is recommended to start RTSS, the installation of which is offered after AfterBurner. Program in Overlay mode (overlay) Visualizes the current number of frames issued by the video card in the game.

Fig. 16 - Regulation of the graphics core frequency

Performance cooling

For activation manual change We click on the gear icon near the Fan Speed \u200b\u200bslider.

Fig. 17 - Turning on the manual control of the number of cooler speed

If you want the system to independently adjust the fan speed, based on the current video card temperature, switch to automatic regulation Values \u200b\u200bby clicking on the AUTO icon.

In the Afterbuner settings tab, the ability to disable the visualization of unnecessary graphs and indicate the peak values \u200b\u200bof all indicators that are read by the program from the sensors are available. When the specified value is reached, the application will warn the user to achieve the upper limit, for example, temperature.

Fig. 20 - we remove unnecessary graphics from the monitoring window

Profiles

For different situations (modern games, video processing, very demanding of the game graphics, work with two-dimensional graphics) In MSI Afterburner, the ability to save five different overclocking options is available. For games, for example, indicators responsible for the performance of the device should be raised, and for watching movies, online work and text editors You can reduce the consumption of electricity to the video card.

What is noteworthy, switching between profiles is carried out "on the fly" by clicking on a single icon or involve the keys attached.

To add presets, change the required overclocking settings in the central window and click on the "Save" icon.

Fig. 21 - Saving new settings in a separate profile

Then click on one of the flashing numbers to secure the current configuration for the corresponding cell.

In the "Profiles" settings tab, the activation of each of the presets can be fixed behind the combination of hot keys not used in the system.

Fig. 22 - fixing the combination of hot keys for activating the list of settings

Earlier, the application was equipped with the functions of capturing screenshots and video from three-dimensional games and maintained various profiles to work in three-dimensional and two-dimensional modes, which made it possible to save electricity, but recent versions Developers abandoned these functions.

On this topic on the topic: "How to use MSI Afterburner" can be finished. And remember: acceleration of the video card not only increases the risk of its premature failure, but also reduces its working resource (accelerates wear).

After termination of support based on it, the program was released.

Its functions include: acceleration of graphics processors by increasing the voltage of key elements, increasing the frequency of memory functioning and, adjust the speed of the cooler and monitor the current status of the graphics card.

How to use MSI AfterBurner, and what it represents, Consider below.

Note! It is very important when operating the application intently control the temperature of the graphics processor, in order not to overload the device and not to deduce it. When using a powerful Gamer video card, it is better to take care of the new cooling system.

The utility monitors the dynamics of the temperature of the device and knows how to display warnings about exceeding the critical (mounted ouzer) value.

Install MSI Afterburner

1. After moving on it, click "Download Afterburner" and wait until the archive with the installer boots.

1. Unpack a compressed file through.

Fig. 2 - Unpacking archive through 7Z

1. Specify the language of the interface and click "OK".

Fig. 3 - Select Interface Language

1. In the rest of the windows, click "Next," specifying the path of installation of the program.

Fig. 4 - Indicate the installation path

1. Upon completion of copying and registering files, you launch AfterBurner.

Fig. 5 - Starting Afterburner after installation

After starting the program, its interface with basic data will appear on the display: current functioning parameters and its condition.

Stylish decoration afterburner

The default skin for the program is not very convenient to operate, so many users immediately change it more friendly.

To do this, call "settings" by click on the gear icon in the center of the window.

Fig. 6 - Application Settings Button

Then go to the "Interface" tab and in the third subsection "The properties of the skins ..." Select a more appropriate application type application.

It also indicates its language, temperature format (Celsius / Fahrenheit) and time.

In the "Main" tab, select a graphical processor subjected to configuration if a pair of video cards is used or, in addition to the integrated, is installed and discrete.

If there are two identical devices running in a bundle, we note the synchronization option to their settings.

Fig.7 - Select the default video card

On the left panel there are data from the numbers about the current value of the frequency of the graphics processor and.

The current temperature and voltage is rendered to the right.

Fig. 8 - information panel

The central part of the interface is occupied by frame with sliders, with the help of which is controlled:

• voltage on the kernel;
• capacity limit;
• boundary temperature;
• frequency of graphics core;
• memory frequency;
• the number of cooler speed.

Fig. 9 - Frame to overclock the video card

Under the frame next to the settings window of the settings window, the reset key to the factory settings is located.

Fig. 10 - button to reset the settings

The lower part of the MSI AfterBurner interface takes the monitoring window with temperature charts and other handwriting parameters.

Fig. 11 - monitoring window for key indicators

The last important element of the interface is the panel for controlling overclocking profiles and switching between them.

Fig. 12 - Presets Management

Simple voltage management rules

The program allows you to adjust the voltage on the master graphics adapter.

Depending on its microarchitecture and the microcircuit used, the parameter can be displayed in Militives or percentages from the initial value.

By default, the option is deactivated on all devices except branded (from MSI). To activate it, you need to go to the main application settings and enable the appropriate option.

There are several modes available here: for reference chips, for MSI chips and third-party graphic adapters.

Fig. 13 - Unlock power voltage control functions

If, after activating the parameter, it still remains inactive (painted in gray), refer to the instruction manual for the graphics processor.

Most likely, AfterBurner does not support the programmable microcontroller installed on the device, even if it supports voltage control.

Improve the value of the parameter should be gradually, a few percent each time, and closely monitor the temperature and stability of the video payment after each value change.

With a significant increase in the device will faster overheat and allow more errors in miscalculations, which will most likely lead to failures in the work of the entire system, the appearance of artifacts, etc.

After reprogramming the controller, which is performed by clicking on the button with the image of the check mark, it is best to carry out, for example, with the help of the Kombuster branded utility.

If no deviations are noticed during the clock pair, the indicator can be increased by a few more percent or tens of units.

Fig. 14 - Application of a new configuration

If, after saving the kernel voltage value changes to the standard, try to go to the settings and select a different voltage control method, but most likely to adjust the value via MSI Afterburner will not work.

Change the peak energy consumption value

The option is not active on all devices, it works only when implementing the technology of electrical energy management in the graphics adapter.

Fig. 15 - slider change of limit power consumption

Core frequency and video memory

Core Clock will help change the maximum operating frequency GPU. What it is higher, the more information is processed in one beat.

Memory Clock is a parameter providing access to video memory frequency programming.

Depending on the device, the values \u200b\u200bcan be represented explicitly or in percentage from the source.

Rapid / lower the parameters are a few percent or a couple of dozen units at each step, conducting stress tests after each save settings or launch.

Program in Overlay mode (overlay) Visualizes the current number of frames issued by the video card in the game.

Fig. 16 - Regulation of the graphics core frequency

Performance cooling

To activate the manual change of the variable, click on the gear icon near the slider.

Fig. 17 - Turning on the manual control of the number of cooler speed

If you wish that the system independently adjust the fan speed, based on the current temperature of the video card, switch to automatic adjustment of the value by clicking on the AUTO icon.

Fig. 18 - Activate automatic regulation of fan speed frequency

In the "Cooler" settings section, you can specify the parameter update frequency and achieve maximum cooling efficiency, which reduces the rim fan.

Fig. 19 - Changing the period for updating the data on the current fan speed

Monitoring

The Afterbuner settings tab of the same name is available, the ability to disable the visualization and the indication of the peak values \u200b\u200bof all the indicators that are read by the sensor program are available.

When the specified value is reached, the application will warn the user about achieving.

Fig. 20 - we remove unnecessary graphics from the monitoring window

Profiles

For different situations (modern games, video processing, very demanding of the game graphics, work with two-dimensional graphics) In MSI Afterburner, the ability to save five different overclocking options is available.

For games, for example, indicators responsible for the performance of the device should be raised, and to view movies, work on the Internet and you can reduce the consumption of electricity to the video card.

What is noteworthy, switching between profiles is carried out "on the fly" by clicking on a single icon or involve the keys attached.

To add presets, change the required overclocking settings in the central window and click on the "Save" icon.

Fig. 21 - Saving new settings in a separate profile

Then click on one of the flashing numbers to secure the current configuration for the corresponding cell.

In the "Profiles" settings tab, the activation of each of the presets can be fixed behind the combination of hot keys not used in the system.

Fig. 22 - fixing the combination of hot keys for activating the list of settings

Earlier, the application was equipped with features and video C and maintained various profiles to work in three-dimensional and two-dimensional modes, which made it possible to save electricity, but in the latest versions the developers abandoned these functions.

On this topic on the topic: "How to use MSI Afterburner" can be finished.

And remember: acceleration of the video card not only increases the risk of its premature failure, but also reduces its working resource (accelerates wear).

If you need a processor monitoring and video card in the game, and at the same time you would not refuse and display during the frame rate game (FPS), then the easiest way to get all this is Nakhalyava - install MSI Afterburner.

The program is simple and visual, its only minus is a very small default interface buttons.

MSI Afterburner is able to monitor all the parameters you need:

• The temperature of the graphics processor.
• The temperature of the central processor.
• Load level and other, to determine the "bottlenecks" of the system.
• Frame rate (FPS).
• The speed of rotation of the video card cooler.
• As well as many other indicators, not so necessary to ordinary gamer, such as frequencies and voltages, as well as information about the paging file. Of course, you yourself assign what to monitor and display on an overlay screen display (OED, it is OSD).
• And MSI Afterburner can capture video and screenshots, and accelerate the video card. In general, full minced!

Data can not only monitor, but also to display during the game to enjoy the diquses in real time, without turning the game every minute. By the way, along with all this statistics on the screen, you can display and hours that happens very convenient.

One of the features of the program is to display on the charts of monitoring peak values, so there is no need to scroll through the graphics - just throw a look at the red numbers above them.

Setting up MSI Afterburner

To begin with, poke the settings button at the bottom of the program panel:

At the top of the window that appears:

1. select the "Monitoring" tab;
2. we put ticks at the points of the list that we want to monitor. Drag the rows with the mouse in the order in which you want them to be displayed in the game;
3. while the line-line is highlighted, it can be assigned - whether it will be displayed in the OED during the game, or not (and at the same time, the color, name, and other properties).

As you can see, in the screenshot, the frequency of frames is not marked, but usually it is necessary to mark it, if only you have the FPS is displayed the game itself, or another program.

After that, I advise you to see what is hidden in other tabs of this panel, especially in the extreme right - the interface.

Setting up OED MSI Afterburner

So, to configure the FPS display and monitor data during the game, in the same settings pane, locate the OED tab, and there - the "Advance" button. Klot her!

OED Settings window opened. In it, you must do the following things:

1. Make sure the OED display switch is in the ON position (if not, you know what to do!).
2. Optionally: turn on if suddenly the anti-ht in the game swears.
3. Optionally: affects the method of display (roughly speaking, on the font) OED. It is best to choose Raster 3D, you can configure the font, clicking on the inscription Raster 3D again.
4. The shadow of the font is better to enable (switch to the ON position).
5. Choose OED font color to your taste!
6. Squares at the corners of the monitor - fast way Move OED to the desired monitor angle. And you can simply drag the OED with the mouse, or to set its coordinates manually.

Here, perhaps, all about fast setting MSI AfterBurner for monitoring the processor and video card in the game. If you need detailed review program opportunities, see one of best video On this topic from Artem:

In this note, I will share a few programs to check the temperature of the computer (processor and video card, if more precisely), which I happened to be used. All of them are relevant for both laptops and ordinary, desktop PCs.

The inspection of the temperature of the computer is needed not only to people, "accelerating" certain components, it is useful and by the usual user. For example, if you play in demanding games, you can understand the maximum permissible temperature of the video card / processor if you should reduce the graphics settings or the system copes with the load. And then, the same load in winter and summer in many regions - two very different things. Like a person, the computer is also not averse to stand in a cool shadow, sipping electricity instead of heating its bodies under the groaning rays of the sun 🙂 in general, if I intrigued - Welcome, we begin to understand!

Immediately I will say that there is nothing complicated here, so with a calm soul, install the program you need and check the indicators of your system.

Overview

Speedfan.

This is the first program with which I encountered when I was set to find out the temperature of the video card, which I suddenly began to bite and issue a "torn" picture, instead of once smooth (so-called. Slideshow effect). Installation did not cause any difficulties, and after the launch, the program was heard in the tray and showed the "middle temperature in the hospital". When you click on the icon, we appear a small window with a bunch of indicators. Let us dwell on some more details:

1. This part of the window contains tabs with additional settings and a plot with some information about your PC. For our purposes, this is not important.
2. Line CPU usage We are also not particularly interesting, here it simply shows the overall loading of the processor and each nucleus separately (the number of rectangles depends on the number of cores from the processor)
3. Here we will sharpen attention. In this tab, the average temperature of the processor as a whole (CPU) is shown and for each kernel separately (Core 0, Core 1, etc.). The GPU item is responsible for heating the video card. By the way, in that story with my card, I was here and saw that the degrees were excavated - the fan (cooler) stopped working, from here and the inability to cope with the load. Lucky more 🙂 and on the left we can observe the current speed of rotation of the fans specified in RPM.
4. The fourth window compartment highlights Speedfan against the background of the remaining reviewed programs: it allows you to adjust the speed of rotation of the coolers. In my case, I can adjust the speed in the video card, thereby reducing its temperature, if required. But, usually she also knows what revolutions "disperse" - just reinsured sometimes.

Verdict: The program is good for those who want not only to know the temperature of the video card or CPU, but also to be able to influence it, or simply wants to reduce the noise from the fans.

MSI Afterburner.

I have already recommended this program as a note about. And indeed, AfterBurner is, perhaps, the most multifunctional program of all in this review: it knows how to record video, do screenshots, show FPS in games, show in the same temperature, loading CPU, video cards, RAM - in general, many options ! But the most interesting thing is that they are all secondary, because The program is known primarily as a means for overclocking video cards.

After starting the program, we will find it in the main window of it, where the left - the sliders controlling overclocking (do not touch them, except that Fan Speed \u200b\u200bcan move, as you like - this is a regulator of the fan "Vidyuhi"), and on the right of the default different information about your The video card required to track the stability of its overclocking. But, since we are pursuing different purposes, then you will configure the monitor window as we need is simple. Personally, I only left the temperature indicators of each of the processor kernels and degrees of the video card.

To select the indicators that you want to see in the monitoring window, press the Settings button and go to the Monitoring tab.

Here we are interested in a section with a choice of indicators that we will watch on the monitor screen and / or right during the game. We note the parameters of the mouse in the left left, and if you want to see some value during the game, select it and select the checkbox "Show in an overlay screen display". If everything is done correctly, then in front of the name of the parameter will appear "in OED", as in the screenshot above.

After the necessary parameters are exhibited, click OK and all - we can observe them in the monitoring panel. But a few words for those who want to see FPS and the temperature of the processor cores with a video card right during the game. To do this, we find in the tray here such a blue monitor icon with numbers, twice with the left mouse button:

And now we have a window of approximately such a content.

Enable (ON) the "Show On-Screen Display" feature, we activate the data display in the game, and using the ON-Screen Display Palette and On-Screen Display Zoom parameters and the color and font size to which this information will be displayed . After applying all the settings in my case it looks like this:

The program directly displays and tracks the temperature of the processor (each nucleus separately, their number can be configured) and video cards, plus a bonus - FPS (number of frames per second)

Hwmonitor

You can't tell a lot about this program, because In the free editorial board, there are almost no possibilities and settings, in addition to the main: viewing the temperatures of various parts of the PC. Hence minimalism in design, but quite detailed information about the state of the system.

In the paid version of the program, the coolers becomes available, but personally, I do not see the point of buying it, when the same is successful with SPEEDFAN, and in the case of the video card, also MSI Afterburner.

Conclusions: Best Program for Checking Computer Temperature

Well, it's time to bring some outcome. What kind of temperature checks should be used?

According to the proposed features, I would give afterburner first place, this program from the Combine series: many functions "in one bottle", plus a very detailed explanation of each item in the settings when you hover the mouse cursor. The latter, in my opinion, is always nice: it can be seen that the developers are not all the same, and they strongly tried.

But, in AfterBurner, you can only adjust the video card fan, so if you checked the temperature of the processor and saw, for example, it is higher than the norm, then here you already help Speedfan: simple, but very useful programI myself prefer to this day for some reason. I really like the decision from MSI, but speedfan is somewhat easier to arrange and for the needs of the temperature (as for me) - the most.

BUT Hwmonitor I advise those who are afraid not to press and something "break" - It is not necessary to press in it simply, you can only find out the processor temperature, vidyuhi and other system components 🙂

That's all today. I hope the note was useful and you can now pick up the optimal solution. As usual, if you have questions - Welcome to comments 🙂 Success!