How to recover data from iphone. PhoneRescue is a powerful tool to recover deleted data from iPhone and iPad

Settings

Whether it's an app or system malfunction that resulted in data loss on your iPhone or iPad, a failed JailBreak, an incomplete iOS update, or device damage. There are many reasons that can lead to data loss. Disk Drill 3 introduces iPhone data recovery mode that also works for all iOS devices. Disk Drill can directly scan your iPhone, or retrieve lost data from iOS backups stored in iTunes. Different types of data can be recovered from your iOS devices. Read on to learn more about how to recover deleted data on iPhone.

Now it's time to install Disk Drill 3 on your Mac, plug in your IOS device, search for it in Disk Drill, click "Recover" and wait for the scan to complete. You can also scan any of the iTunes backups stored on your Mac, you can extract tons of valuable data from your past backups. Also, iCloud backup recovery will be available soon.

If you are planning to transfer or restore data to iPhone, then you can do this using the backup function. To do this, connect your device to your computer or set up cloud storage. Since you can restore a backup to an iPhone from iCloud only if you have an Internet connection, then connect to the network.

How to restore an iPhone without a backup

If there is no backup, but the device needs to be restored (for example, due to a system error, breakdown), then this can be done in several ways:

Perform a hard reset to factory settings. To do this, go to the iPhone settings and select the appropriate item. The method is suitable if the device starts up, but you need to update the firmware without a computer.
Activate DFU mode. After that, connect the iPhone to the computer using a USB cable and download the new firmware version. All user data will be erased and the iPhone will be restored to its original state.

If the device does not work, but important information and other files are stored on it, then before using the recovery mode, create a backup copy of the data through iTunes. After that, you can transfer them to your already working smartphone.

You can try to restore a deleted backup on your computer using special software. The method is relevant if the backup was erased recently.

How to restore iPhone via iCloud

If the device has cloud backup enabled, follow these steps to restore data:

Turn on the iPhone you want to restore and go to the Settings menu. Additionally, turn on mobile data or connect to a Wi-Fi network.
In the "General" section, find and select "Software Update". A check will begin for a new software version. Download it if necessary.
Check the official iCloud website for a backup. After that, turn on your iPhone and go to the Settings menu.
Find the line with the account name and go to the "iCloud" tab. Here select the item "Storage" - "Manage storage". The list and parameters of the most recent backups will be displayed.
Please do a factory reset before starting data recovery. This can be done through the "Basic settings" menu. Click on the "Erase Content and Settings" button to completely erase user data.
Wait for the operation to complete and perform the initial setup. In the "Applications and data" block, click on the "Restore" button.
Select "iCloud Backup" from the list of suggested methods. To do this, you will need to sign in to your account.
From the list of available ones, select the backup you want to write to your new device.

How to put an iPhone into recovery mode

Disaster recovery mode (DFU) is required for emergency data backup and operating system updates in cases where it is impossible to do it using the usual methods. Allows you to restore system files, update the firmware. How to activate DFU:

Disconnect your iPhone and use a USB cable to connect it to your Windows PC or Mac.
Hold and hold down the Home and Power keys at the same time.
After about ten seconds, release the Power key. But don't let go of the Home key. It must be depressed.
Wait until a system message appears on the computer screen.

After emergency power on, the smartphone will restore all system files. The method is suitable for all iPhone models. Further information and instructions for putting the device into emergency mode can be found in the documentation.

How to restore an iPhone via iTunes

If you used iTunes before to make a backup of your data, you can transfer the resulting copy to your smartphone. Procedure:

Use the original USB cable (supplied with your phone) to connect your iPhone to your PC or Mac. Run the aytyuns program. If necessary, download the distribution from the official Apple website.
Put your mobile device into DFU emergency mode (how to do this, read the instructions above). After that, a notification about the found phone will appear on the computer screen.
In iTunes, go to the Overview tab. Information about the connected device, serial number will appear. Hold down "Shift" on your keyboard and click on the "Restore iPhone" button.
A warning will appear on the screen. Confirm the action and again agree to the operation.

After that, all user data stored in the backup will be transferred to the smartphone. Sometimes errors can appear in the process. Therefore, below we will consider the most popular problems that may arise.

Failed to restore iPhone error 3194

Error 3194 when restoring iPhone can appear for various reasons, most often due to downed network settings. Then the computer cannot connect to the Apple server and download the latest firmware. How to fix:

On a Windows computer, navigate to the System32 folder and find the Drivers directory here.
Using the "Notepad" system utility, edit the "hosts" file. To do this, right-click on it and select "Open with" in the context menu.
Find and delete the line containing "gs.apple.com" in the file. There will be an IP address next to it, it must also be erased.

Save your changes and restart your computer. After that, try to carry out the data recovery procedure again.

Failed to restore iPhone error 9

Most often it appears due to the disconnection of the connection between the computer and the device. For example, if a faulty USB cable is used. What to do:

Activate DFU mode on your iPhone and only then start recovery.
Try using a different cord (original only).
Plug the cable into a different USB port.
Reinstall iTunes.

If the described methods do not help to resolve the error, then most likely the problem is in the faulty device. In this case, contact an authorized service center. In some cases, it may be necessary to clean or completely replace the connector.

You can recover accidentally erased user data (notes, contacts, installed applications) by restoring a copy of the device through iCloud.

Error 4013 when restoring iPhone 6

Appears if during the restore process iTunes could not install the firmware, the procedure was interrupted or canceled by the user. To solve the problem, follow these steps:

Change the USB cable, try using a different USB port on your computer.
Reinstall iTunes, check for updates for your PC Windows or Mac. If available, be sure to download them.
Make sure that there is no dust in the connector of the device, and after connecting the cable "does not come off".
Try activating recovery mode on your iPhone or connecting your smartphone to another computer.

If the error still repeats, then try using a different method to recover data and be sure to contact the service center. Most likely, the cause of the error is a breakdown of internal components.

Now almost every home has some kind of storage device: hard drives and solid state drives (SSD) in computers and laptops, USB sticks, microSD cards, and so on. True, all these devices have a common serious flaw. Due to the complexity of the technology that is used in their production, there is always a chance that the drive will fail, "burying" all available information: photos, home movie collections or music. Hard drives and SSDs have a limited data rewriting resource that a common user cannot always track down. But even if the drive is out of order, this does not mean that the data is lost forever. In most cases, them.

How - the specialists of the ModMac service center tell.

The HDD is a magnetically coated disk that spins at high speeds (from 5,000 to 15,000 rpm). A magnetic head moves along it on an air cushion, which reads the magnetic field of the disk tracks, or writes it. The positioning of this head is very precise and the disc surface must be perfect. A disc with a diameter of less than 10 cm can hold over a million tracks. The heads are controlled by a special microprocessor on the disk board.

There are several types of damage and data recovery methods. The most common problem with hard drives is damage to service information (head alignment, physical size of the drive, area with a surface defect, and so on). In this case, software recovery of bad zones and saving a disk image will help, which costs from 5,000 rubles.

Another problem that occurs most often is damage to the magnetic disk due to the exhaustion of the resource. In this case, the HDD self-diagnosis program (S.M.A.R.T.) simply blocks access to it. In this case, the lock is released and all undamaged information is read. Will cost 3,000 rubles or a little more.

The third most common problem is mechanical damage to the disk or head. For example, being hit or dropped while reading or writing. The moment the head, moving at a tremendous speed over the surface of the disc, twitches and hits the surface of the disc, it is damaged and destroyed. In this case, the disk is first washed, the head is changed to a new one or removed from the "donor", service information is edited, and then the disk image is read. The cost of such work is from 8,000 rubles.

Damaged SSD

SSD (solid state) drives are a board with microcircuits soldered on it. From 1 to 16 NAND memory chips are connected to the SSD controller. An SSD is much faster because it has no moving parts and writes to multiple memory chips simultaneously. The most common problem with SSD failure is software failure. In this case, the controller is flashed and the SSD image is read (cost from 2,500 rubles).

The second problem is the exhaustion of the rewriting resource for NAND memory chips. The already mentioned system of self-diagnosis (S.M.A.R.T.) can block access to data. In this case, the lock is released and the intact data is read. Such work will cost twice as much.

Another common problem is the permanent failure of one of the NAND chips or the SSD controller itself. In this case, the NAND microcircuits are unsoldered and the images on the programmer are read separately. Then a virtual collection of the SSD and data decryption is done, after which everything is "merged" into the SSD image. The cost of such work is about the same as when developing a rewriting resource.

The USB stick is damaged

A USB flash drive, like an SSD, is a board with soldered controller chips for a flash drive and NAND memory (from 1 to 4). When a USB flash drive fails, the NAND chip is most often removed and read on the programmer. Also, quite often flash drives are subjected to mechanical damage. For example, if used carelessly, the USB connector comes off. In this case, the USB is soldered directly to the controller, and then the data is read. You can restore a USB flash drive for 2,500 - 5,000 rubles.

Data on iPhone or iPad is damaged

IPhones and iPads, like SSDs, have NAND storage. it is extremely difficult with her, since she is extremely scrupulous about security issues and installs an advanced encryption system in her tablets and smartphones. Therefore, if your iPhone or iPad is broken, you can recover your data in the absence of damage to the NAND and the central processor. In this case, you can get access to the motherboard, and with its help get all the information from the device. The cost of work is from 2,500 rubles.

From the listed devices, you can contact our partner - the ModMac service center. Do not forget that the site is valid for all readers 10% discount for all types of repairs.

Years of experience with computers have taught us that lost information can almost always be returned with the help of special programs. For smartphones and tablets, there are also simple recovery tools that anyone can learn to work with.

Recover data on iPhone, iPad and iPod

To recover data on an iOS device, you need to download and install the iSkysoft iPhone Data Recovery program on your computer.

If you have doubts about the program's performance, it is recommended to use the free version, which will allow you to see the recovered data, but will not allow you to save it. If all the necessary information is found, then you can safely buy the full version.

The types of data available for recovery depend on the specific scenario. If you have an old iPhone 3GS / 4, iPad 1 or iPod touch, then regardless of whether you have an iCloud or iTunes backup, you can pull out:

If you have an iPhone 4s / 5 / 5s / 5c / 6/6 Plus / 6s / 6s Plus / SE, iPad 2 / Retina / mini / Air / Pro or iPod touch 5, then if you don't have an iCloud or iTunes backup, you can pull out the data highlighted in white:

If there is an iCloud or iTunes backup, grayed out data is added to them. You can recover Facebook Messenger messages only from the device.

Data recovery from device

Select the item Recover from iOS Device.
We connect the iOS device to the computer via USB.
The program will detect the device, offer to select the types of data to recover, and then start scanning.
After the scan is completed, the detected data will be available for viewing and recovery.

Recovering data from iCloud backup

Launch iSkysoft iPhone Data Recovery.
Select the item Recover from iCloud Backup File.
We log in with our Apple ID.
The program will offer to download the backup file and show its contents.

Data recovery from iTunes backup

Launch iSkysoft iPhone Data Recovery.
Select the item Recover from iTunes Backup File.
We log in with our Apple ID.
The program will prompt you to select a backup file to restore and show its contents.
We select the data to be restored.

Returning iOS to a working state

In addition to data recovery, iPhone Data Recovery is able to return the operating system to a working state in cases where the device does not boot.

To restore the operating system to work, just connect the device to the computer, select the Fix iOS to Normal tab, click Start and wait for the process to complete. At the same time, user data remains completely safe.

As you can see, when you turn to the right tool, data recovery on an iOS device is not more complicated, and in many respects even easier than a similar procedure on other operating systems. Of course, not everyone will want to pay for the full version of the program, but the value of the information is generally difficult to assess, so everyone makes the decision to buy themselves based on the situation. In general, iSkysoft iPhone Data Recovery has several objective advantages:

The greatest possible ease of use. No complicated console commands, no confusing menus and settings. The program does everything by itself.
You don't need to install anything on your mobile device.
Data safety. It's nice when, restoring one, the program does not violate the integrity of other information stored on the device.
The program does not make any changes to the operating system of the device and does not leave traces of activity. If in the future you have to contact the service, manipulations with iSkysoft iPhone Data Recovery will not affect the warranty in any way.
Support for all types of data that can be of value to the user.

We sincerely hope that you will never have to turn to data recovery software and all your information will always remain with you, but if force majeure does happen, then iSkysoft iPhone Data Recovery will help.

Data Recovery on Android

You can find detailed instructions for recovering data on smartphones and tablets running Android in our.

Restoring an iPhone is a standard operation to return an Apple smartphone to a usable state after various failures. Unsuccessful firmware, incorrect jailbreak, incorrect iOS update - if you know how to restore an iPhone, you can fix almost any malfunction that occurs during the operation of this device.

Recovery order

To restore iPhone, you need to enter Recovery Mode. It's easy to do this:

When the iPhone is ready for the rollback and error correction procedure, click the "Restore" button.

iTunes will independently find the current version of the firmware and install it on the smartphone, returning it to the state in which it was immediately after purchase.

DFU operation

If iPhone recovery does not work in Recovery Mode, then you need to enter the device into DFU mode. This mode is used when there are software errors - for example, when the iPhone does not turn on. DFU mode works at the hardware level, so it helps to perform a factory reset even in the most difficult cases. To enter DFU mode:

Connect your device to your computer.
Press and hold Power and Home for 10 seconds.
When you count to 10, release Power while continuing to hold the Home button.

It is difficult to enter DFU mode the first time, as nothing changes on the screen. If the recovery mode detects itself with the iTunes icon, then the phone does not seem to turn on in DFU. Therefore, you need to look at the computer screen where iTunes is running. As soon as the iPhone enters DFU mode, a notification will appear in iTunes informing that the program has detected the device in recovery mode, and you need to reset all settings and content to continue working with the smartphone.

If you need to install a different firmware, then hold down Shift and click "Restore". An explorer will appear, through which you need to specify the path to the previously downloaded firmware.

Recovery without a computer

If the computer is not at hand, it does not turn on, or you cannot connect an iPhone to it, then try resetting all settings through the device settings. As a result of this operation, you will get a clean smartphone without settings and user information, so be sure to make a backup before resetting. If the smartphone turns on normally:

It is not necessary to delete custom files. If the iPhone turns on, then you can fix the malfunctions in its work by simply resetting the settings. In this case, the user's personal data will remain intact.

Recovery after a reset

If you need to restore your iPhone after resetting all settings and deleting content, then you won't be able to do this without a backup. The presence of a backup file with information stored in the device's memory is the main point that you need to check before performing a reset. When the iPhone is rolled back to its factory state, all of the user's personal data is erased from it.

Create a backup before factory reset:

After the reset, the iPhone will be like new: no content or settings remain on it. To get all the information back, you need to connect the device to your computer and restore from a backup via iTunes. Choose the most recent backup, as it contains the most relevant information.

You can also restore all settings after a reset through iCloud, provided that you have stored backups on the cloud. In this case, when setting up the iPhone, you need to select the "Restore a copy from iCloud" option and specify the appropriate backup.

Recovery problems

If after a normal recovery the phone does not turn on, then it makes sense to put it into DFU mode and try to restore it again through iTunes. This time, you should not trust iTunes: download the official firmware and select it in the explorer window by holding Shift and clicking on the "Restore" button ...

Sometimes the TinyUmbrella utility helps to solve the problem that the smartphone does not turn on after a factory reset via iTunes. This program has an "Exit Recovery" button. If the iPhone after recovery does not turn on, you need to select it in the TinyUmbrella window and click "Exit Recovery".