USB Flash Drive is an external information storage device that works on the principle of a rigid disk. As well as hard drives, flash drives are subject to typical breakdowns associated with short circuit board, failure of clusters and low quality products. Faced with such problems, users are forced to resort to the help of specialists to restore flash drives.

Determination of the disability of the flash drive

USB drives were created for convenience of storing information so that the user can save the necessary file at any time on any computer or exchange the desired information with another user. It is because of the frequency of use, rapid wear of the carrier occurs, as a result of which the chips fail, the contact group is loosened and the computer ceases to identify the flash drive or defines it as a unreadable disk.

The main signs of the outlet of the flash drive:

1. Frequent file system failure. Instead of NTFS, FAT32 becomes RAW and an unknown file system, the investigation of what the user has to format the carrier, which leads to the complete loss of all information stored on the flash drive.
2. Definition of computer media with interruptions.

Treatment of removable media

If the user has faced the problem of failure of his removable media, you should not immediately fall into despair and throw out the flash drive. You can try to restore it before throwing out using various software. Usually, each manufacturer provides a force majeure option, with which the buyer of their products may encounter, and produces diagnostic and software for the recovery of the flash drive. You can download programs on the official website of the manufacturer.

There are also universal programs that may try to cope with such a task how to cure a flash drive.

Programs for restoring a USB carrier:

1. SDFormatter produces low-level formatting, the so-called flash drive treatment, after which you can try to restore files from the work flash drive.
2. D-Soft Flash Doctor also is also engaged in low-level formatting, but simultaneously detects damaged sectors and can restore them by reassigning to the backup.
3. The site is a universal assistant for the user during recovery. In the iFlash section there are all kinds of programs for any drives.

Restore information

If the treatment procedure was successful, all information will remain on the USB drive and it will be possible to continue to use it in normal mode. But if I had to resort to ordinary or low-level formatting, then after such a procedure all information will be destroyed. Try to restore the necessary data using special programs:

1. Recuva. The program applies free of charge. Thanks to the simple intuitive interface, any user can figure out the functionality. But indicators of information recovery are at a high level.
2. Wise Data Recovery allows you to restore with different types of media, such as: MP3 player, cameras, phone memory cards.
3. Pandora Recovery is a less well-known version of the free program to restore remote files, but copes with its duties no worse than the more promoted analogs.

Such programs work one scenario.

A complete analysis of the marked partitions of the disk or selected drives is performed. The user can then choose the recovery method - express or manually, as well as mark the types of files that require attention. After the analysis is completed, the user must select the folder to which files will be recovered, and wait for the end of the process.

After that, you can check the files for integrity and efficiency. If the rehabilitation procedure did not give the result, it can be repeated, changing the type of analysis to the deeper.

With a re-negative result, you can try to use another program until the required result is reached.

If you use a removable drive carefully, choose a well-known company, do not expose the device to external factors and do not insert into unreliable computers, the equipment will serve without failures not one year.

Despite its manufacturability and a number of indisputable advantages over optical information carriers, USB flash drives are still at risk of failure. When the user deprives confidential data, exclusive photos or electronic keys in a single copy, at the time to think about the meaning of the word "catastrophe". However, even with the most unfavorable events, there is always a place of hope. In our case, the role of the latter is the resuscitation of the flash drive. All the depressed and those who have once disengagingly treated the elementary rule of safe removal of the device, awaiting a pleasant miracle. Really working recovery technologies will be available and understandable to you immediately after you read this saving arch of information. Walk shivering and get rid of excitement - your flash drive will work again!

Memory that brings people

In order for the reanimation of a flash drive has become a successful recovery process, it is necessary to understand what exactly the cause of the digital sabotage caused, and should also know exactly the model of the memory device (often enough to have information about the manufacturer). Perhaps you will help with myself some feeling of guilt that promised by the manufacturer the reliability and security of data storage on the USB Flash Driver storage devices are rather relative concepts than the proven truth. This confirmation may be a number of reasons that significantly affect the efficiency and long-term use of negotiated drives.

Basic technological restrictions

There are still several specific restrictions. However, in the context of this article, the mention of them will be simply unnecessary information - we will miss the terminology difficult to perceive ...

Under what conditions is the resuscitation becomes inevitable?

In the process of using a flash drive, a often unlucky user allows a fairly widespread error - extracts a storage device, so to speak, on the go, forgetting that it is necessary to pre-disable it using the OS software. This ultimately leads to a full either partial inoperability of the flash drive, which is expressed in the following:

• The storage device is recognized as an unknown.
• Flash-drive file system is changed to RAW.
• When you open the flash drive, the folder is empty.

Otherwise, a certain trend of standardization of risk factors is traced, since mechanical damage or critical exposure to water will adversely affect absolutely any electronics.

USB flash drive resuscitation, or its restoration methods

Depending on the above "symptoms of electronic illness", there are several actions algorithms. It is worth noting, some recovery methods can either not work at all, or give a positive result only after a certain time. However, in case of compliance with the described recommendations, your chances of success are incredibly large. Believe in good luck, and she will certainly smile!

Method number 1. Situation resolution

A single copy of archiving information is a significant occasion to try to extract the data hidden in digital deprants. The main rule in such a situation is nothing to do anything with the Flash-drive before the start of the direct recovery process (there is an attempt at rampant experiments: formatting, recording, etc.).

You will need a special program. The reanimation of the flash drive (the process of data recovery on it) will be carried out using the R-Studio software. Why exactly this program? It is free and, despite the simplicity, it effectively returns from digital nonsense lost (even formatted!) Information. Among the "Frishny" software is the best tool for data recovery.

After you downloaded and installed R-Studio, it is recommended to close all active applications before starting the software.

On the left in the main window of the program highlight your USB drive.

Then activate the Scan tab.



• In the next window of the program, in the block where it is written, specify in the check box "Start" the initial value "0", and in the area below "Size" - the nominal capacity of the flash memory recovered.
• Make sure that the "Famous Files" item is marked.
• After that, boldly press the "Scan" button.
• After some time, the R-Studio flash drive program will finish the recovery process and requires some actions from the user.
• In particular, it is necessary to once again specify your USB drive to the right and using the right mouse button to call the context menu.
• In the list choose "Show content ...". A list of reanimated files will appear on the right, among which you will definitely find lost data.
• The right mouse button and the selection of the Restore item is the penultimate stage of digital reincarnation.
• The final is the choice of directory to save.

As a rule, such a program for resuscitation of the flash drive is used once, since after some stress, the user becomes prudent and in the future always duplicates valuable information to the hard disk of the computer.

Method number 2. Software failure

When the Flash drive is incorrectly determined by the OS or the operating system refuses to work with the device, a specialized utility to resuscitate flash drive can help. Depending on the variety of the controller involved in the storage device, an individual firmware is used, which works with specifically specified identifiers of the control chip. By virtue of the specificity of this method, a phased action plan is offered to your attention.



Step number 1. Definition of VID and PID Controller

• Enter the "Start" menu.
• Hover over the "Computer" section and by pressing the right mouse button, call the context menu - select Device Manager.
• In the list of the display components of the system, stop your selection at the controllers of universal serial ... ".

Note: Absolutely no difference when a flash drive resuscitation is performed, transcend USB drive or other which modification of the storage device requires identifies to determine identifiers. Literally for all Flash memory types, the described scenario will be identical.

• So, the next step is to open the branch of the section "Universal Controllers ...".
• Among the displayed devices will choose "memorable ...", which, in general, is the designation of your flash drive.
• Using the same manipulation (right button + long press), call the pop-up menu in which you activate the "Properties" item.



• In the window that opens, go to the "Details" tab, where in the check box it is necessary to set the parameter - "ENGLISH ID".
• As a result, in the area below you will see the information you are interested in in the form of numeric and character values, which is the desired component to determine the appropriate utility.

Step # 2: Search for the best firmware

Resuscitation of the Kingston flash drive is implemented with the help of the same low-level utility, because more efficiently and safer the option today is simply no! The algorithm for finding the required software corrector is simple enough: drive into the search string. Copied VENDOR ID (VID) and Product ID (PID) identifiers and download the found utility. But the most acceptable option is to appeal to the manufacturer's official website in the Technical Support section.

Nevertheless, there are a lot of various Internet resources, whose specialization is just concerning this kind of recovery issues. An incredibly popular IFLASH service has a truly stunning base of low-level utilities. The best software solutions, most of which are from flash drive manufacturers - and all this is completely free! Taking only a few minutes of its time, you will definitely get a positive result in the form of the necessary software.

Method number 3. Effective resuscitation



TRANSCEND flash drives, however, as many others can be returned to e-life, using the universal Flash Memory Toolkit program or an equally functional HP USB Disk Storage Format Tool. To date, these are the best digital resuscitations. However, we will negate: similar software solutions are aimed at total recovery of memorizing type, that is, directly through the inevitable formatting process. So if all your attempts to pull the lost data from digital abyss were in vain, and the price of information is not so significant to contact the specialized center, it is likely that the performance of the flash drive itself will become a comforting prize.

Conclusion

As you understand, an incredibly multifaceted process of restoring flash drives was presented in a fairly capacious version. At the same time, to the question of what utility is better, you can definitely answer the short phrase: "That that works!" However, leaning on the material of the article, you will definitely achieve the desired result. Good luck to you and absolute reliability in data storage!

USB flash drive is not defined when connected to a computer or laptop? You can't write anything to her? And even format the flash drive fails? In principle, not all is lost. Most likely, the problem lies in the controller. But it is corrected. And everything will be required for a maximum of 5-10 minutes.

The only nuance is the restoration of the working capacity of the flash drive is only possible that it does not have any mechanical damage. That is, if you have turned off it, not through the "safe extraction" (or something like that), then this can be corrected. At least, it is worth at least try to restore the non-working flash drive.

Even if it seems that the USB flash drive came the end, you should not carry it into repair. And especially throw out. First you can try to restore the damaged USB flash drive. How? Especially for this below shows a detailed instruction on the recovery of the flash drive.

The manual works for all USB flash drives: Silicon Power, Kingston, Transcend, Data Traveler, A-Data et al. With it, you can restore the file system and eliminate any problems (except for mechanical damage).

So, the first thing you need to do is determine the parameters of the USB flash drive. Or rather its VID and PID. Based on this information, you can define the controller brand, and then choose a utility that will help restore the damaged USB flash drive.

To find out these parameters, perform the following:

1. Connect a USB flash drive to a PC or laptop and go to the Start - Control Panel - Device Manager.
   


2. Find the "USB Controllers" section.


3. Double-click on it and you are looking for a "USB storage device". This is your flash drive (remind, it must be connected to the computer).


4. Press on it PCM and choose "Properties".


5. In the new window, go to the "Details" tab.


6. In the "Property" field, select the ED ED END (or "Instance Code").


7. See VID and PID values \u200b\u200band remember them.

   At this screenshot VID - 090C, and PID - 1000.



8. Next, go to the site, enter your values \u200b\u200bat the top of the site and click the "SEARCH" button.
   


9. Looking for a model of your USB flash drive (according to the manufacturer and memory volume). In the right column "Utils" there will be a program name, with which you can try to restore the non-working flash drive.
   

After that, it will remain to find this utility by name or follow the link (if there is it) and download it.

Restoring the Kingstone flash drives, Silicon Power, Transcend and other models is easy: just run the program and follow the instructions.

What if you did not find a suitable utility for your model? To do this, go to Google or Yandex and write something like this: "Silicon Power 4 GB VID 090C PID 1000" (Of course, it is worth indicating the parameters of your flash drive). And then see what I found a search engine.

Never use programs that are not suitable for the VID parameters and the PID of your controller! Otherwise, you will "kill" a flash drive finally, and it will not be able to restore it.

In most cases, the recovery of the damaged flash drive is successful. And after that it will be determined when connected to a PC or laptop.

This is thus the repair of the flash drives with your own hands with the help of a free utility. Perhaps the instructions for recovering flash drives will seem complex, but you will cope. After all, everything you need is to determine the controller parameters and download the program for free. In addition, this procedure takes 5-10 minutes from force.

And most importantly: in this way it is possible to restore the damaged USB flash drive in 80% of cases. While most specialized programs with this task may not cope.

Choose the best programs to restore flash drives. We tell how to restore a USB flash drive, reanimate it with free utilities.

Flash drive - A small device for storing information (documents, music, video, files), convenient for carrying and connecting to USB port, extraction from a computer, laptop. Contains the controller and special chips that store information inside the chip.

Sometimes we copy the files and forget about them, and when we recall, we discover that the valuable files either erased or removed permanently. Or the device broke, you formatted sections. What to do, often a digital flash drive (most often, the controller in it) breaks, generates errors, does not open onto the PC flash drive - will not pass and the month. Once a flash drive may require recovery. The reason for, maybe:

• incorrect, non-accurate operation of the Flash-drive
• incorrect formatting of media
• a poor-quality flash drive, bought in the market or Zadevo in the Chinese (probably mistaken)
• physical or software breakdown flash drives (most likely cause)
• also, the reason for the inoperability can be an incorrectly extracted flash drive from a computer or laptop. This happens when an impatient user literally pulls out a Flash drive from a USB jack in the process of copying or transferring files.

The reasons when it is necessary to restore the flash drive that does not open on the computer or is recognized with read errors - the set. Fortunately, today specialists from service centers without problems and errors will help you return valuable files, restore the device's performance. Recovery programs will be returned to the files in the target and security, or at least partially reanimate the data on the USB flash drive. It is worth the Flash Recovery procedure that are not so small money, which makes you think about the independent restoration of the USB flash drive. Alas, free utilities are not always useful.

For a flash drive, SD memory cards are to the same extent characteristic of all symptoms and consequences of removing digital information. It may be a random erase, unconscious or simply deleting files from a USB drive, damage to the structure, physical or mechanical damage to the controller or memory chips ... anyway, but the recovery of the flash drive and SD card is the task more than relevant for PC owners. Therefore, first read the content of this section.

A flash drive does not open: we study the symptoms of damage

In the Recovery section, we will talk about the main problems associated with the restoration of information on the Flash and Secure Digital storage. As a rule, it is associated with hardware or software damage to the flash drive - if it does not leave or is not recognized correctly. Sometimes the memory is wearing, sometimes the controller fails. And the USB controller drivers are not at what. In some cases, you can solve the problem yourself and as a result to save files on a flash map or repair the Chip, device, ignoring reading errors on your computer. We list only some symptoms indicating the drive breakdown:

• PC does not see the flash drive in the list of available devices
• the flash drive is not displayed when connected to a laptop or computer (the OS does not matter)
• the flash drive is not read: although the files can be seen on the USB drive

Help on the content of the section "Restoring flash drive" (Flash Recovery)

• A small guide related to the question is like - the search for the reasons why the card does not work or the PC does not see the flash drive on a par with other discs (the device is not recognized, reads with problems, requires formatting, freezes, it gives an error when copying to the card and so on.) Flash -storage device. Diagnostics of faults is important in such situations, because without determining the disease, you can not heal the patient, and even easily ruin my life, we do not use the instruments, using not those methods and programs that are able to revive the drive. In this article, we analyze the causes of damage and possible symptoms that lead to the need to restore Flash disk, Secure Digital, controller, Memory Chip "and flash cards.
• We try (with the help of instructions and utilities laid out on the site) and at the same time, it is high-quality - how to solve problems with your own hands - eliminate the breakdown on the SD card, to reanimate the controller, correctly format, solder a departed contact or memory chip, scan information and process broken sectors on Flash "Ke, sections with read errors. True, the methods described require known skill and the experience of ownership of the specified tools.
• If it does not open on the computer or is not displayed correctly. What is "vid & pid", as this abbreviation is decrypted and what to do when the device is not recognized or does not open. Explanation of terminology without which it is difficult to imagine restoration for flash drive, data and digital information on it.
• - Testing 5 kindup programs, each of which has remarkable features when working with memory or a storage chip.

Restoring USB flash drives and memory cards. Utilities for formatting

One of the best ways to resuscitate the jetflash flash card is to reformat it again, low. As a rule, such measures are being taken when the Flash drive is not read. If possible, you need to ask a memory maker (say, a data, seagate, transcend sd, datatraveler or other), do they have branded utilities or fresh drivers for reconstruction. Scroll through the content of this partition to help, and you will see several articles on the topic of low-level storage formatting. Fortunately, in the Windows 7 operating system and above there are tools for formatting a Flash device without using third-party computer applications. One of these programs for the flash drive is HP USB Disk Storege Format Tool.

Diagnostic Formatting Flash Card in the HP USB Disk Storege Format flash drives program

Utility for recovery flash drive HDD Low Level Format Tool

Many know that the HDD Regenerator program is used to help with the revitalization of hard drives (HDD), but not many know that it fits such a device as a flash drive. The essence of the program is the detection of broken BAD-sectors on the device, followed by the processing of the information received, depending on the controller and the memory model, on a low USB access level. As a result, you get a working device that can copy files without reading and writing errors. This greatly contributes to the restoration of the flash drives if the computer does not see them. The HDD Regenerator program is provided with the recovery instructions, besides, on the website Recovery website you can find a guide to the use of utility and correct formatting (see via the search). You can download the program to restore the flash drive directly by reference hosted on the HDD Regenerator Regenerator Review page.

We open and diagnose the problem flash drive in the HDD Low Level Format program

By the way, in other sections on the SoftDroid website you will find other programs to restore flash drives (for example, Flash Recovery or Jetflash Recovery Tool), but we advise you first to study all the information collected in this section. We hope, after the measures taken taken, the computer will see a wow flash drive.

Why do not you specify the cost of the product, before downloading the program to restore the flash drive and install it?

Answer. Download all the above programs to restore flash drives you can on the official website. Only reviews are published on SoftDroid - we do not have the physical ability to update the cost of the value of the products presented. When you download a trial version of the program, it is free. Next, see the value information from the developer or at the end of the trial period you will have a notification.

Ask us a question on the restoration of the flash drive

Site specialists Site will help restore data. You ask a question - we answer it for free (the answer you will receive by mail).

The question may not be associated with the recovery of files. The main requirement is described in detail the problem, formulate it so that you do not have to decipher your message.

Flash Drive Information Extractor - Program for obtaining information and diagnostics USB flash drives

Information about flash drive (model, manufacturer, firmware version) helps better understand the device, features its work. In turn, it allows, to propagate, restore files or fix the device.

How to restore deleted files from a USB flash drive: step-by-step guide

One of the top problems associated with deleting files belongs to the flash drive. Let's talk about how to restore remote files from the flash drive in Unformat. What free software to install on a computer, what program, in addition to unformat, is effective when working with a flash drive. The following methods will be relevant for USB drives, memory cards, SD cards of digital cameras in the Windows OS environment. We will try to help you, even if the situation is complicated.

What if the computer does not see a USB flash drive? Solve problems and eliminate errors

If the file system of the memory card / USB flash drive is incompatible with the computer, when connected to a PC, the contents of this memory card will not be displayed. Accordingly, you cannot work with the device until you fix the format. In addition, there are a number of other reasons, because of which the computer does not displays a USB flash drive (SD card) as a separate disk in the explorer.

How to restore the flash drive with your own hands: Instructions for Flash drives

In this article, I want to tell how to restore the flash drive: About all available methods for restoring damaged, non-working, failure, faulty USB drives. I suggest the most complete instruction that includes all available methods, as well as programs that optimize restoring flash drive.

USB flash drive repair with your own hands: Eliminate hardware and software problems

What if the computer does not see the flash drive? Agree: the question is painful and frequently asked. Another popular questions faced by the owners of the flash drive - repair as a result of the breakdown. The USB drive has its own features of the repair of the controller, memory failing: in some cases, the storage device is not determined by the PC. What if the flash drive is not defined on any computer? This guide describes the intensive care hours of the "invisible" flash drive for correct recognition on the computer.

Overview of USB USB Recovery Recovery Programs

Errors in USB flash drives are found not often. Almost all of them are reduced to the impossibility of reading or record the necessary information in the memory of the device due to software damage.

Specialized programs provided by device manufacturers will help to resolve the problem and restore the memory card.

To restore the work of Noname, flash drives and those who do not have their own software for recovery, will suit the built-in Windows CHKDSK and the formatting system.

Select the best program to restore remote files from a USB flash drive.

Damaged a portable USB flash drive or a memory card? These best-of-kind programs will help save and return information, and here you will learn what is the restoration of data from the flash drive. Among applications - Undelete 360, Cardrecovery, Photorec, Recuva Professional and other candidates. You will also learn how to reanimate the flash drive of each of the programs.

Easeus Data Recovery Wizard Free 11 - Program for free data recovery

Easeus Data Recovery Wizard supports many data deletion scenarios on SSD. We will run Recovery Wizard and in step by step, explain how to restore. In the free version of Easeus Data Recovery Wizard Free there are restrictions, we will tell about them in more detail. Using the Easeus Data Recovery Wizard program, you can restore the files, remote information from the formatted disk, laptop or removable devices like a flash drive or SD card.

Where to download photorec program for free (for Windows)

The photorec free program is designed to recover multimedia data on HDD, USB flash drives, SD cards and other storage devices. Overview of PHOTOREC recovery features, scan options. Where to download PHOTOREC for Windows and other OS.

How to restore flash drive unformatat

I offer you an effective method for restoring USB recovery flash drive. It will take a specialized utility for its application - UNFormat. The program has long established itself in the field of specialized software. In the instructions, I described in detail the whole process of returning files - from scanning a disk before saving files on a flash drive.

UNFormat supports the restoration of the flash drives of almost all manufacturers presented today on the market.

Good day, friends! Today we will consider important for many users a question of repairing damaged flash drive and restoring data stored on it. Agree, the situation is not pleasant when you lose personal documents without the possibility of their further recovery. It can be valuable photos from family holidays, the results of your creative activity or the material at all on which the whole career depends.

Hurry up to delight you! Regardless of the type, any document is subject to restoration and further work with it. However, before we proceed directly to repair the damaged media and the "resuscitation" of the previously lost materials, let's consider the symptoms of the problem.

In case of damage to the flash drive, the following messages may occur on the user screen:

• The USB device is not identified.
• The device connected to the computer is defective and Windows does not recognize it.
• One of the devices connected to this computer does not work and Windows does not recognize it. To help solve this problem, click on the message.
• Unknown disk, port failure.
• The device descriptor failure failure. Error 43.
• Failure when connecting the device.

As you can see, a list of possible messages is very extensive. However, you should not be afraid of the amount, since it does not affect the success of your actions aimed at correcting the error.

In this article, we will consider several effective ways to repair a damaged flash drive and the recovery mechanism of lost data. We specially placed them in complication order, which will allow you to significantly save your personal time by starting with the simplest.

Data recovery with damaged flash drive Starus Partition Recovery tool

If your flash drive is not read, but in the list of connected disks, it seems like a physical device, you can immediately begin directly to work on the rescue of lost files. Unfortunately, Microsoft has not provided its own specialized software, which would help users at any time restore remote material, so the only accessible way is to use third-party software.

We recommend using the application. This program is designed specifically to restore files in harsh working with damaged drives when another software loses any efficiency.

Features:

• Compatibility with all versions of the Windows operating system.
• Comfortable, intuitive Russian-speaking interface.
• Availability of step-by-step instructions that will hold you in all stages of working with the program.
• The possibility of deep analysis.
• Distribution of found files by signature (format).
• The presence of a preview window. You can study both graphic and text documents in advance.
• The presence of all types of exports.

How to recover data from a damaged device?

1. Run the Starus Partition Recovery application.

2. Select the disc you want to scan.

3. Select the desired analysis type.

4. Wait for scanning.

5. Explore the files found using the preview window.

6. Select the required documents, click on any of them right-click and press the key. Restore.

7. Choose the most convenient way to export.

Note!
Under no circumstances export data to the disk from which you restore them. This may lead to their permanent loss without the possibility of working with them.

Repair of damaged flash drive

Connect to another USB port

The first action on our list is to verify the USB port performance. Very often we do not pay attention to the most obvious, Imissioning at the same time the opportunity to get an instant solution even seemingly the most difficult issue.

If you have connected a flash drive to a computer and Windows cannot identify it, there is a possibility of direct damage to the port of the device. Try connecting the drive to another port and check it out again.

Connect to another PC

With time, the development of technologies and the fall in prices for various devices, many users together with a stationary computer are increasingly beginning to purchase laptops. For someone, this is a source of entertainment in the form of films, and for someone a means of earnings. Regardless of the reason, the acquired device can always be useful not only in relation to its main task, but also help to check for the performance of any flash drive or SD card.

Try connecting the drive to your laptop or the second computer to make sure that it is working. In the event that this decision was powerless, let's consider the following method.

Driver Update

As you, for sure, you know, the presence of obsolete, or no missing, the drivers can significantly affect the performance of all connected devices. No matter how unexpected this statement, USB drives, like any other device, also require a timely updated "firewood".

To set the latest software version for your flash drive, use the instructions below.

1. Open the utility Perform. (Key combination Win + R.)

2. In the dialog box, enter the command devmgmt.msc. and press ENTER.

3. Expand the list and locate the flash drive, the driver you want to update.

4. Click on the device right-click and select the parameter. Refresh Driver.

5. Click on the command and wait for the process to complete.

If the method described above does not help you, we turn to the next one.

Repair of a flash drive using a conductor

This method is most popular among all users of the Microsoft Windows operating system. The reason for this is its simplicity and efficiency. Let's look at the recovery process.

1. Open My computer / This computer.

2. In the disk list presented, find the right mouse button on it and right-click.

3. Select a parameter Format.

4. Click on command Restore default parameters.

5. Press the key To begin And wait for the formatting.

In the event that formatting turned out to be powerless in the recovery of the flash drive, it's time to go to "heavy artillery" - command line.

Flash drive repair using CMD

- One of the most difficult and, at the same time, effective tools for working with the operating system and components of the PC. It often helps even when all other utilities are powerless and allowing the computer to "stand up on" when the operating system reports full failure. So, how can we apply it regarding the repair of the flash drive?

The method that we consider below is inherently no different from the previous one; With one exception - formatting is carried out in a compulsory manner. This feature allows you to restore a flash drive to the original parameters even if it is a different failure blocks such an opportunity.

So how do you all repair the USB flash drive using the command line?

1. Connect the damaged flash drive to the computer.

2. Open the Start menu and enter the following: or cmd..

3. Run the application on behalf of the administrator.

4. Enter the command diskpart. and press ENTER.

5. Enter the command lIST DISK. and press ENTER. You will display a list of all drives connected to the computer.

6. Enter the command sELECT DISK. (Your flash drive number) and press ENTER.
For example: sELECT DISK 1.. Make sure the disk number is entered correctly. Otherwise, you risk formatting not the drive.

7. Enter the command clean. and press ENTER.

8. Enter the command cREATE PARTITION PRIMARY. and press ENTER.

9. Enter the command active. and press ENTER.

10. Enter the command sELECT PARTITION 1..

11. Enter the command format FS \u003d FAT32 and press ENTER.

12. Wait for the formatting process.

If this method was powerless, then it is probably the only thing that can help you - physical repairs of the flash drive or the acquisition of a new one. Nevertheless, we recommend paying attention to the next chapter.

Repair with specialized software

Some flash drive manufacturers show a special interest in servicing their customers. If any failure occurred on your flash drive, we recommend visiting the manufacturer's website and, if there is any, install software designed specifically for your device. There is some likelihood that he will help return the drive to life.

For those who could not restore the USB flash drive by ordinary methods, we prepared a manual for manual repair of the device.

Physical repairs

It is not always possible to restore the drive in conventional ways. If you are not afraid of difficulties or you like to discover new areas of activity, try to produce your own physical flash drive.

Let's look at the process Read more:

1. Remove the flash drive housing.
You need to be extremely careful in the process, since there is a real risk to apply irreparable damage to the device by damageing the board. Any careless movement can destroy all the chances of recovering data.

2. Visually examine the fee for possible damage.
Contacts must be reliably soldered. If they depart, it is necessary to make appropriate repair. It is extremely important in the process not "burn" healthy parts of the board.

In some cases, the USB connector does not turn out to be soldered to the board. Therefore, in the current situation we will need the following:

1. Find an unnecessary USB cable.

2. Cut the output.

3. Divide the cable for 4 wires. At the same time, leave the backup distance to the connector in case you fail to solder the first time.

4. Apply a light solder on each wire.

5. Carefully suck each wire to the board in the correct order. Put the USB flash drive on the table on the left side and contacts to the right. It is necessary to solder in the following order:

• Red wire;
• White wire;
• Green wire;
• Black wire;

Failure to comply with the order of the soldering can damage the flash drive.

Now you can connect a flash drive to a computer and proceed to data recovery.

We hope the article turned out to be useful for you and helped return your USB device to life.