How to remove recent calls and contacts from the iPhone screen. How to remove recent contacts from application shift screen how to remove recent

It happens, we climbed to someone else's computer in search of a compromise on a good person, and did not find anything. And now in the history of the latest files it can be seen that and when you opened. It should be ashamed ... so as not to drop your honor and not lose trust, consider in this instruction how to clear the folder of recent documents on the example of Windows 7.

Of course, it is impossible to climb in other people's computers. But knowledge from this article should be in the head of everyone, because not to know it is also ashamed, how to dig in other people's files.

Clear recent Windows 7 documents

In fact, everything is very simple. So just that I even thought about whether it was worth writing about this. But still decided to write.

During the following actions, the UAC security system will be popped up. We need to agree with everyone. In general, I would recommend.

So, first we will understand where the recent documents Window 7 stores. To do this should be included. Then go through the following address: C: \\ Users \\ User \\ AppData \\ Roaming \\ Microsoft \\ Windows \\ Recenta (or C: \\ Users \\ User \\ APPDATA \\ Roaming \\ Microsoft \\ Windows \\ Recent Documents).

If your operating system lies on another disk, and not on with, then you need to look on that disk where it is.

From this folder "Recent Documents" you can delete all or selective latest open windows files 7. Moreover, you need to delete later and from the basket too.

Clear recent Windows 7 documents can be both in another way. Click "Start". Select the "Recent Documents" item there, click on this folder right mouse button and select "Clear the list of recent documents". After that, you also delete files from the basket.

The second method to clear the recent Windows 7 documents is easier to first, but the first is given if the second fails.

Turn off recent Windows 7 documents

If necessary, you can disable recent Windows 7 files. This is also done very simple.

Press the right mouse button on the taskbar, select "Properties".

Then go to the tab "Start menu" and remove a tick near "Store and display a list of recently opened items in the" Start "menu and on the taskbar."

Then click the "Configure" button in the same window. In the window that opens, looking for a line "Recent Documents" and from it, too, take a tick. Click here "OK" and again "OK" in the previous window.

Everything. If you click "Start", then there will be no point there with recent documents. The files opened before you have disconnected this function, will also be deleted. Last open documents Windows 7 are disabled and not saved.

In Windows 10, when the user runs Windows Explorer, the Quick Access Panel (or Quick Access) window opens by default, which contains a list of recent files and frequently used folders. If this innovation delivers you an inconvenience, here is a guide that will help you disable frequent folders and recent files in the Quick Access Panel section.

Open the Explorer window and go to the View tab. Click on the "Parameters" button, and then select "Change folder and search options".

This will lead you to the settings window for all folders. windows Explorer. At the bottom of the window (on the General tab, you will see the "Privacy" section, which contains two parameters. One of them is responsible for displaying the recently used files on the quick access panel, and the second for displaying the folders to which you appeal most often. You can turn them off both or just one of them. Here you can clear the whole story if you need to keep track of the file and folders from scratch.

After turning off both parameters, only fixed folders will remain on the shortcut panel.

If you want the operating system to continue to offer you quick access to frequently used files and folders, but at the same time you do not want the Quick Access to display certain folders or files, you can remove them from there manually. To do this, right-click on the folder / file and in context menu Select "Remove from Quick Access".

The selected item will no longer appear on the quick access panel, regardless of how often you use this file or folder.

Excellent day!

Lists open files and connected by USB devices, Browser history, cache DNS - All this helps learn what the user did. We made up step-by-step instructionshow to remove traces of your activity in different windows versions, Office and popular browsers. At the end of the article you will find several scripts that will help you automatically keep clean on your car.

1. Cleaning lists of recent places and programs

Let's start cleaning from the lists of recent places and programs. The list of recent (in Windows 10 - Frequently Used) programs is located in the main menu, and the list of recent places is in the explorer.

How to disable it disgrace? In Windows 7, right-click on the Start button, select "Properties" and in the window that appears to remove both ticks in the "Privacy" section.

To clear the list of recent places and documents, you need to delete the contents of the directory of the% APPDATA% \\ Microsoft \\ Windows \\ Recent. For this, open command line And take two teams:

CD% APPDATA% \\ Microsoft \\ Windows \\ Recent Echo Y | Del *. *

It also does not prevent remove the contents of the directory of the% APPDATA% \\ Microsoft \\ Windows \\ Recent \\ AutomaticDestInations \\. It stores the latest files that are displayed in the transition list:

CD% APPDATA% \\ Microsoft \\ Windows \\ Recent \\ AutomaticDestInations \\ ECHO Y | Del *. *

For the latest files to be cleaned automatically when you exit, you need to enable the policy "Clean the log of recently opened documents at the output", which is in the section "User Configuration \\ Administrative Templates" Start "menu and taskbar".

Now go to Windows 10. Disable the list of newly added and frequently used applications through the "Parameters" window. Discover it and go to the "Personalization" section, the Start item. Disable everything there is there.

It seems that the problem is solved, but this, alas, not quite so. If you enable these parameters again, all lists in the same composition will appear again. Therefore, you will have to turn off this feature through group policy. Open the gpedit.msc and go to the "User Configuration \\ Administrative Templates" Start "menu and taskbar. Include the following policies:

• "Clearing the list of newly used programs for new users";
• "Clear the magazine of recently opened documents when exit";
• "Clear the log of notifications on the tile upon exit";
• "Delete a list of programs assigned to the" Start "menu.

Clear recent places in Windows 10 is easier than in the "seven." Open the conductor, go to the "View" tab and click the "Parameters" button. In the Disconnecting window that appears, the "Show recently used files on the quick access panel" and "Show frequently used folders on the quick access panel" appeared. Do not forget to click "Clear".

As you can see, there is a simple task as cleaning the last objects, a rather difficult solution. Without editing group politics - nowhere.

2. Clearing the list of USB drives

On some mode objects, only flash drives registered in the journal are allowed to connect to the computer. And, as usual, the magazine is the most common - paper. That is, the computer itself does not limit the connection of unregistered drives. Does not limit, but logs! And if when checking detects that the user has connected unregistered drives, it will have problems.

In no way we advise you to try to steal military secrets, but the ability to clear the list of newly connected drives can be useful in other life situations. To do this, look into the following registry sections:

HKEY_LOCAL_MACHINE \\ SYSTEM \\ CURRENTCONTROLSET \\ ENUM \\ USBSTOR \\ HKEY_LOCAL_MACHINE \\ SYSTEM \\ CURRENTCONTROLSET \\ ENUM \\ USB \\

Here they are all the drives that you connected to your computer.

It would seem, you just need to take and clean it. But it was not there! First, permits for these registry branches are installed in such a way that you will not delete anything even in the "seven", not to mention the "dozen".

Secondly, manually assign rights and permissions for a long time, especially if there are a lot of drives. Thirdly, admin rights will not help. The screenshot above was created when I performed the removal operation just with the rights of the admin. Fourth, besides these two partitions, you need to clean another long list of sections. And they need not just delete, but correctly edit.

If for some reason you need to do everything by hand, then look for keywords MountPoints, MountedDevices DeviceClasses and RemovableMedia. But much easier to use ready Programwhich will do everything for you. On some forums, a USBDEView is recommended for this. However, I tested it and declare that it deducts information from all the necessary sections. Usbstor and USB Continue to contain information about connected media.

I can recommend the program. Run it, put a tick "Clean Real Cleaning". The "Save.Reg-Cancel file" parameter can be turned on or not, but if the target does not check the program, but prepare for the coming computer inspection, then it is better to turn off.

The program not only cleans the registry, but also displays a detailed log of its actions (see below). When it completes the work, there will be no mention of connecting drives to the computer.

3. Cleaning the cache and browser history

The third point in our turn is cleaning the cache and browser magazine. There are no difficulties - each browser allows you to reset the list of newly visited sites.

Continuation available only to participants

Option 1. Join the site community to read all the materials on the site

Membership in the community during the specified period will open you access to all the materials of Hacker, will increase your personal accumulative discount and will accumulate a professional Xakep Score rating!

Information viewed by the User in the World Wide Web is saved and displayed in the visits used by the web browser used. The presence of such history reviews facilitates the search for sites to which the user came earlier. However, such data stored on the Winchester, weigh a lot. To clear the memory of the computer, periodically need to delete the history of views.

1. Run the Yandex browser.

   

2. On the browser toolbar, find the button with strips shown on it. Click on this icon.

   

3. In the window that opens, select "History". Click on it.

   

4. In the open submenu, select the "History" subparagraph.

   

5. Find the "Clear Story" link. The link is on the right side of the screen (upstairs). Click on it.

   

6. Select the period for which you want to delete visits log entries.

   

7. Select the items you want to delete: a list of visited sites; List of downloaded documents; cached information; cookies files And other information about websites; data for automatic authorization; information about software; Mediacency.

   

   Note!Cash is a reserved area of \u200b\u200bmemory, an intermediate buffer at high speed exchange speed.

8. Click on the "Clear Story" button.

   

List of visited links is deleted.

Cleaning the journal visits in chrome

1. Run the browser.

   

2. Find the button on which three points are depicted. Click on it.

   

3. In the window that appears, select the Story Row. Click on it.

   

4. Another window will open. Re-select "History" in it.

   

5. On the left side of the screen, find the phrase "Clean the Story". Click on it.

   

6. A new tab opens. A window will appear in which you will need to select "Basic Settings" or "Additional".

   

7. Click on the arrow in the "Time Range". Specify the period for which you want to clear the history of the journal visit.

   

8. Below select the information you want to remove: visiting history; files and data of websites; Cache pictures and other files.

   

   Note!Cookie (Cookies) is a small data fragment that is sent by a web browser and stored in the user's memory.

9. Click the Delete button. If you change your mind to clean the log, click on "Cancel".

   

Cleansing history in opera

Method 1

1. Open the Opera Web Browser.

   

2. In the upper right corner of the screen, find the icon on which three strips are depicted. Click on.

   

3. Window opens. Scroll through it with the mouse wheel until the string "go to the browser settings" appears. Click on this phrase.

   

4. A new tab opens. Left Find the word "security". Click on it.

   

5. In the "Privacy" group, click on "cleaning the history of visits".

   

6. Specify the time interval for which you want to delete information.

   

7. Select the information from which you want to get rid of: List of viewed sites; List of downloaded documents; Cookies and other sites information; cached photos and files; passwords; Information for automatic authorization; News use data.

   

8. Click on the "Clear Visiting Study" button. Otherwise, click on the "Cancel" button.

   

Method 2

Information is deleted.

Cleansing history in safaris on iPhone and iPad

1. Find the "Settings" button. Click on it.

   

2. Find the Safari section. Click on it.

   

3. Select "Clear Story". Click on it.

   

4. Confirm your actions by clicking on the "Clear Story" button. Otherwise, click on "Cancel".

   

5. The "Clear Story" button is darkened. The history of visits is cleared.

   

Cleansing history in chrome on iPhone and iPad

The journal of visits is cleared.

Cleansing history in chrome on Android

Cleansing history in Yandex.Browser on Android

1. Run the web browser.

   

2. In the lower right corner, find the icon with three dots. Click on it.

   

3. Select the "Settings" section. Click on it.

   

4. Enter the item "Privacy."

   

5. In the "Privacy" group, tap the "Clear Data" button. Select the information from which you want to get rid of. Confirm your actions by clicking on the Delete button.

   

The data is deleted.

Video - How to quickly clear the memory iPhone / 2 GB in 5 minutes

Restore the last session in any browser

The last session is open.

Restoring history in any web browser

1. Click the Start button.

   

2. Click on the All Programs button.

   

3. Scroll through the window of the mouse window until the string "Standard" appears.

   

4. Click on the "Service" button.

   

5. Click on "System Restore".

   

6. Put the mark near "Select another recovery point." Click the "Next" button.

   

7. Select a period to which the computer must recover. Click on "Next".

   

Note!The system restore can affect other software. For example, at the end of the rollback of the drivers installed earlier may be absent.

Video - How to Delete History in Yandex Browser

Surely many users of Apple phones have noticed that in recent versions operating system iOS appeared quite interesting innovation - when opening the multitasking mode at the top of the screen, you are displayed as yours recent contactsSo contacts from the list "Favorites", if you have such.

An innovation is undoubtedly interesting and convenient, but in some situations it can play a joke with you. From the history of calls, delete one line is quite simple, but from the "recent" in the upper panel, it will not be deleted, what can issue the fact of your communication with someone, one should not know about someone.

If you do not consider this innovation for yourself very useful, it can be very easy to disable it in the settings of your iPhone. How to do it, read in this small instruction.

Disable the display of recent calls and contacts

Setting up the display in the multitasking panel of recent calls and selected contacts is made very simple, like everything else on the iPhone, but it is not so easy to find it. In order to enable, or vice versa hide recent calls or contacts from "elected", do the following simple actions.

Step 1. Turn the settings of your iPhone

In any way you are familiar to you, open the settings of your iPhone, for example, clicking on the icon named "Settings" On one of the screens of the smartphone.

Scroll down the settings menu down to the point title "Mail, addresses, calendars" And open it.

In the settings submenu that opens, you also need to scroll through the lines slightly down, and find in the menu with the title "CONTACTS" Point with title "Show the program"And of course to open it.

As a result of your actions, you will finally get into the very settings that are responsible for displaying recent calls and contacts from "Favorites" in the multitasking panel (or program panels) of your iPhone.

Step 2. Turn off or turn on recent calls.

The most difficult thing is to find responsible for displaying recent settings - left behind. In the resulting as a result of your actions in the previous step of the menu, simply move the sliders to the position you need.

You can remove recent challenges from the screen, leaving your favorite contacts, or draw on the contrary. Of course, you can and remove all contacts, leaving an empty space over running applications in the iPhone multitasking panel.

In order to return everything back and turn on the display of recent calls on the screen of your iPhone, simply move the settings sliders to the other side.