Installing a sim card in iphone 6s. How to insert or remove a SIM card from Apple devices: step-by-step instructions and tips for owners

Previously, we looked in detail at how to clear memory on an iPhone using iTunes and without it, wrote a small instruction that you can read. Nowadays it is difficult to imagine the work of a phone without a SIM card. All iPhones and most iPads are designed for communication between users, friends, colleagues and people close to us. Communication is possible both via the Internet and via the network mobile operator, using a sim card. How to insert a SIM card into an iPhone 7? Read on.

A SIM card is an intermediary that provides the communication service operator with information about your device, its access to voice communication and data transmission. Full operation of the device is impossible without a SIM card. So, in this article we will deal with a seemingly simple question of how to insert a SIM card into the iPhone 6 and most other iPhone models. First, let's consider what type of SIM is required for the normal operation of the device.

According to official information from the Apple website, the following types of SIM cards are used in the iPhone, which are shown in the image. Therefore, be careful and check the consultant of the operator of communication services or insert the SIM directly in the communication salon, in the presence of an experienced assistant.

How to get a SIM card out of an iPhone 5s

All we need is to find out where the SIM card tray is located on the smartphone itself and the tool to extract the SIM card from the gadget.

The main difficulties that may arise on your way to remove a SIM card are the availability of a tool, but this is not a problem. We will manage with the means at hand.

To begin with, if you have a paper clip that is included with the device, we recommend using it. Remove the cover from the smartphone and find the SIM card tray. As a rule, its distinctive feature is the presence of a hole in the case on the side of the device. Insert an original Apple paperclip into the hole and press down firmly to release the SIM card tray out of the slots.

After pulling out the tray with the SIM card from the device, the inscription SIM card is not active appears on the smartphone. We advise you to turn off your smartphone before inserting or removing a SIM card.

How to get a SIM card out of 5 iPhone if there is no original paper clip?

Probably every house has toothpicks. Many people use toothpicks after eating, but not everyone thought that they can be used as one of the improvised means to remove a SIM card from an iPhone.

ATTENTION! WE ARE NOT RESPONSIBLE FOR ALL ACTIONS THAT YOU TAKE WITH YOUR SMARTPHONE TO REMOVE THE SIM CARD.

As a rule, a standard toothpick will not fit into the hole in the SIM card tray of an iPhone. To get the SIM out of the iPhone using a toothpick, you should slightly sharpen its edges (do it already). Try to trim just a little from both edges. If you make it too thin, then the toothpick will break off when you remove the SIM card, be careful.

Where are the SIM slots on other iPhone versions?

Pretty much every iPhone comes with a SIM tray. The only exception was the CDMA variant of the iPhone 4. Therefore, if you have an iPhone 4S or newer, then you will definitely find a SIM card compartment on your smartphone. Let's describe in words where the slot is located and on which models:

iPhone 3G3GS: on the top, between the headphone jack;

iPhone 4-4S and later: On the right side of the case, which is opposite to where the volume buttons are located.

Every time you replace a SIM card, make sure that you put it in the tray in the correct orientation, so be extremely careful. Our instructions will also help those users who ask the question "How to insert a SIM card into an iPhone 7".

Reliable screen protector for iPhone - with full 3D coverage. Manufacturer, company Benks.

Is iPhone hard to deal with?

In terms of the complexity of its iPhone devices may well claim to be one of the most accessible and intuitive devices - even a child can figure it out. Nevertheless, when working with it, many people have the same question: how to insert into the iPhone? To cope with this seemingly difficult task at first glance, it is necessary to carefully study the scope of delivery of this device.

To insert a SIM card into an iPhone, you need a special paperclip

From simple mobile phones, a SIM is inserted into the iPhone using a special paper clip that can be found in its box. Outwardly, it resembles the most ordinary paper clip and is made of a special flexible wire. Before inserting a SIM card into the iPhone, it must be turned off. This can be done by pressing the on / off button of the device and holding it for 3-4 seconds. Immediately after that, Slide to will appear on the iPhone screen. power off... Just slide your index finger over it and it turns off immediately. Now you can insert a SIM card into it.

You can easily insert a SIM card into an iPhone

Then remove a special paper clip from the box. Insert one end of it into the hole of the SIM card slot and press a little on it. Remember to press lightly and very gently, otherwise you may damage your iPhone. After pressing, the slot should pop out automatically.

Then take the SIM card and carefully insert it into the slot. Slide it back in and turn on your iPhone. This completes the whole procedure.

After buying an iPhone, when you hold the phone in your hands, so that you can start using the phone as soon as possible, a very childish question arises, how to insert a SIM card (SIM card) into an iPhone? It's fun, really, because the phone cover cannot be removed, as we are all used to!)

For you, owners of iPhones, we have prepared instructions with pictures on how to insert a SIM card into an iPhone.

To insert / change a card in an iPhone, it is not necessary to turn it off. The iPhone will independently determine whether there is a card or it is missing. However, we recommend turning off the iPhone when replacing the SIM card.

1. To turn off the iPhone press the on / off button and hold it for a few seconds.

2. "Slide to power off" will appear shortly.

Swipe the red arrow and the phone turns off

3.Use the iPhone needle that should come with the purchased iPhone or use a paper clip and insert the needle / paper clip into the hole in the SIM card holder. Do not apply a lot of force, you will feel resistance, and after that the tray of the SIM card holder will come out of the case.

4. Insert your SIM card into the iPhone holder and place it back into the phone.

5. Everything is done, now you just have to turn on the iPhone by pressing the power button after waiting, which you see in the first picture, holding it for a couple of seconds.

After these simple actions, the phone will see your operator mobile communication and you can enjoy your purchase.

Thanks for your attention! now really, with the help of our online store.

The design features of Apple gadgets distinguish these devices from devices of other brands. The structure of iPhones is focused on the minimum interference of the owner in the design of the phone and user safety, which is not typical for economy class smartphones. Therefore, at the first acquaintance with the iPhone, the newly minted "Yabloko" often do not know how to insert a SIM card and start working with the device. Further instructions are valid for the ruler iPhone smartphones 5 - iPhone X.

Preparing for the initial launch of the iPhone consists in unpacking and visual inspection of the gadget. After unpacking the box, make sure that it contains all the kit components declared by the manufacturer, namely:

• a smartphone packed in a plastic protective form;
• sync cable and power adapter;
• thick white paper envelope with a needle for opening the SIM card slot;
• apple Airpods headphones;
• decorative elements;
• headphone adapter.

Before starting, pay attention to the gadget controls. On models "5" and "SE" the button responsible for locking the phone screen and turning it on / off is located on the top edge of the device. On "six" and newer models, the lock button is located on the right side of the smartphone.

On the left side panel, there are volume controls and a quick switch to silent mode.

The Home button is the main one when working with the device; located at the bottom of the front of the gadget; allows you to switch between tasks, go to the main menu, call voice assistant Siri.

The models of the families "5", "6", "SE" are equipped with a standard headphone input of the "3.5" type. Starting with the "seven" there is no such connector - the headphones are adapted to the battery socket, that is, you can insert old Airpods or third-party headphones only with the original adapter from the kit.

Now that the educational program on the controls has been carried out, you can proceed to the tips for installing a SIM card.

Features of the used SIM-card format

Starting from model "5", iPhones are inserted into a Nano-SIM card - the smallest available from telecom operators. The basic size SIM is compatible with the first two generations of Apple smartphones - the iPhone 3G and 4s were equipped with Micro-SIM slots.

Nano-SIM format specification:

• length: 12.3 mm;
• width: 8.8 mm;
• thickness 0.67 mm.

It is possible to adapt the standard subscriber module to the Micro-SIM format by cutting off a part of the plastic case. An ordinary SIM card cannot be inserted into new iPhones, even if you cut out the plastic part as much as possible - in the Nano-SIM the chip itself is smaller. Therefore, in some cases, subscribers are forced to change SIM cards in order to start using Apple products. In communication salons it is changed on the day of treatment; the subscriber number remains the same.

Where and how is inserted

Most smartphones are designed to fit a SIM card into a slot located under battery... The smartphone device does not involve the owner dismantling the battery. The subscriber module is installed in a special hatch in the device body. Moreover, the card is not pressed against the reading board, but first is placed in a retractable slide.

On the first Apple devices, the connector for installing the subscriber module is located at the top of the smartphone, above the head speaker. From model "5" the SIM card slot "moved" to the right side panel, where it remains to this day.

Access to the tray is limited by designers: in order to remove the slide from the SIM, you need to open it using the proprietary key included in the delivery package (by default, it is in an oblong white envelope).

Installation process

The general algorithm is shown with an example Apple iPhone 5S, but also relevant for newer models):

1. We take out the device from the case.

1. We take out the SIM card slot key from the envelope - it has a large oval eyelet and is similar to a paper clip.

1. We find the SIM slot on the right side panel of the iPhone or on the upper edge (the outline and the lock cylinder are clearly visible).

1. We insert the key into the hole, press slightly - access is open. On most devices, the SIM card mount pops out of the slot on its own. On used phones, the slide can be difficult to run due to wear or dirt.

1. We take out the slot, put it on a flat surface. The SIM card is simply inserted into the slot from above. Note that it is placed on top, not below. Make sure the position of the SIM card matches the opening in the tray.

1. you need to put the card into your smartphone. It is more convenient to do it this way: turn the phone with the right side towards you and hold it with one hand in this position. With the other hand, insert the mount with the SIM in the working position, at the same time holding the card with your index finger.

1. We insert the slide into the hole, push them all the way so that they do not protrude from the body. Installation completed.

Important!!! In Apple gadgets, the subscriber module mount is completely removed from the device. Therefore, be prepared for it to fall out of the case. Another important point: the correct position of the SIM card does not have technological markers, except for coincidence along the contour, i.e. there are no additional latches or latches.

All the described manipulations are easier to carry out with the gadget turned on. If the device does not have a SIM card, then the diagnostic message “SIM card not inserted” is displayed on the notification screen, and the network indicator will be absent (instead of it, the message “No network”).

If all the above manipulations are done correctly, then after a minute the message will disappear, and the name will appear on the display cellular operator and signal strength indicator.

What to do if a paper clip was not included to open the tray

A common problem for Yabloko. Typically, the factory key is lost during operation. Most relevant for those who purchase a used incomplete iPhone: the key is missing.

In this case, you need to use a handicraft analogue of a standard tool. This can be:

• thin needle;
• paper clip.

Before use, a paper clip must be unbent and when installing the module, work with a sharp end. In this case, the paper clip should enter the diameter of the tray larva. The same is with the needle. At the same time, a handicraft tool should not be brittle, because a metal fragment stuck in the hole of the tray can entail expensive appeal to a specialized service.

It is not necessary to abuse such substitutes - their use over time leads to breakage of the tray opening.

Possible problems with reading SIM-card and ways to solve them

When the SIM card is detected and read without errors, the device displays the name of the cellular network, signal strength, and the available type of wireless Internet connection. If "SIM card not inserted" or "No network" is displayed instead, the subscriber module is inserted incorrectly or there is a technical malfunction.

Incorrect installation

In this case, the position of the tray with the SIM card is incorrect: there is a skew or the SIM is fixed in the wrong position. There are precedents when the SIM-card is not properly fixed in the holder (installed with the chip upwards or the current position does not coincide with the technological opening of the tray). To troubleshoot, correct the position of the SIM card.

Technical difficulites

It is possible that the SIM is not detected by the device even with the correct position of the subscriber module. This card is defective and will not work on smartphones from other manufacturers. The defect occurs after the owner of the gadget tries to cut the card to fit the "nano" format in an artisanal way. Physical deterioration of the card is also possible - bends, kinks, etc.

Summary and comments

Protecting your device and user data is a key Apple priority. The design features described above make it difficult for malicious access to phone components. This technology gives developers hope that the owner will be responsible for installing / removing a SIM card from a device.

With such a locking mechanism, the SIM card does not fall out of the gadget and is not lost, even if the phone falls or receives other mechanical damage. In the case of iPhones, this arrangement of the tray was hallmark firms. Nobody has done this before.

Video instruction

You can watch a detailed video tutorial on how to insert a SIM card into an iPhone. The video will help users better understand the implementation of all the proposed actions. To avoid malfunctions, strictly follow the sequence of operations shown in the video.