Is it possible to change the screen on an iPhone 5.

Personal Area

It often happens that the iPhone fell out of the hands, and not only the glass, but also the display itself was broken from a strong blow. Naturally, the smartphone cannot work in this state. As a rule, as proof of this, the working touchscreen of the iPhone 5S or the touchscreen controller of the iPhone 5S does not respond. Although Apple devices practically do not break as a result of a high-quality assembly, unfortunately, a working iPhone display has not yet been invented to be made of an unbreakable touch glass. If this happens on your iPhone 5S and display replacement is required, then in a professional service center you will have to unfasten a tidy sum to restore the screen. How to replace glass and remove it on iPhone 5S?

If you have already disassembled iPhones and have an idea of \u200b\u200bhow to do this, then this article will help you to accurately perform all actions in a device where the screen is buggy, there is no working iPhone 5S display and the touchscreen does not work.

To get started, you must purchase a new display that has been released for the iPhone 5S model. IPhone 5S has a 4-inch Retina display. The screen is covered with a special grease-repellent coating that does not leave fingerprints. Gorilla Glass prevents the screen from annoying and annoying scratches.

This article is devoted to answering this question. By studying it, you will have more confidence in your actions to replace the display. Simultaneously with this work, the iPhone 5S glass can be replaced with your own hands. In this article, you will also learn how to change glass for iPhone 5S quickly and accurately.

The 5S smartphone is designed in such a way that replacing the display module of the Apple iPhone 5S is simple enough. You don't need to be a great professional for this, but you need to have patience, be careful and attentive. Replacing the iPhone se screen requires work preparation, for which you need to prepare the tools necessary to carefully and accurately loosen the bolts.

Arm yourself with the necessary tools and tools for this disassembly. What should you cook? Prepare a paper clip for ejecting a SIM card, a special Pentalobe screwdriver with a "chamomile" tip, a plastic pick knife (can be replaced with a hard plastic spatula), a construction knife with a thin blade, a suction cup with a ring, a set of mini-screwdrivers of a standard size, small containers for screws and bolts, for a touchscreen, liquid for wiping boards, and of course a new screen.

If you are ready to change the screen, then we can start following the following instructions for the iPhone 5S.

The first step is to turn off the iPhone 5S using the Power button. Then pull out the phone card from the iPhone, for which you need to poke a hole in the card tray with a paper clip at an angle of 45 degrees.

Front panel shooting

The next step will be to replace the module on the iPhone 5S. Let's start directly disassembling the iPhone. Let's start by removing the front panel and separating it from the case cover. To do this, using a chamomile-shaped Pentalobe screwdriver, you need to unscrew a couple of screws located on the outside on both sides of the USB input at the bottom of the device, near the speakers.

Now, using the sharp metal tip of a construction knife, pry the back cover of the smartphone from the bottom corner, attach the suction cup under the Home button on the back cover. The suction cup should adhere completely. Place your smartphone on the table with the screen facing down and pull the suction cup towards you. With your other hand, push the plastic pick into the gap and horizontally slowly pull the pick along the entire slot of the case, snapping off the bolts. Carefully lift the liquid crystal screen with a spatula. Special wires run from the surface of the screen - loops, they cannot be damaged.

It is not necessary to abruptly remove the cover, as you can damage the internal loop of the Home button and render the iPhone completely unusable. After lifting the screen 90 degrees, leave it in the same position to continue working further.

Freeing the plumes

Next, very carefully remove the red, orange and yellow screws one by one. Slowly remove the metal connector between the battery and the iPhone board. Then, gently using tweezers with curved edges or using a plastic spatula, pry off the three consecutive connectors of the light sensor, front camera and microphone cables at the top. The digital sensor loop is orange. The red ribbon is at the front camera and sensor, and the yellow ribbon is at the screen. Finally, remove the smartphone display.

Disassembling the speaker

Now let's take a look at the speaker of the smartphone. To do this, use a screwdriver to disconnect 2 bolts on the iron cover - the front camera holder. Take it out and very carefully and gently release the speaker. Now, using a plastic spatula, snap off the front camera cable in order to further free the front camera itself and the speaker.

IPhone Touchscreen Replacement

Now that the screen is released from the case, you need to unscrew the 2 screws on the button holder - the iron plate at the location of the Home button in order to carefully disconnect the flex cable with the fingerprint sensor and also remove the button itself. While removing the train, pry it up with a plastic spatula and wiggle it from left to right. Take out the touchscreen on the iPhone by prying it with a plastic spatula, disconnecting it from the display. The button is free, set it aside.

Taking the free panel in your hands, replacing the Phillips screwdrivers again, remove 4 screws - two on the sides that hold the panel, one on the bottom and one on the top that hold the display, and separate the built-in protective thermoplastic of the screen.

Display replacement and how to replace on iPhone 5S

After that, attach the protective thermoplate and the button to the whole display. Reinstall all of the removed cables by attaching them to the iron plate of the new display screen and tighten all the bolts.

It remains to connect three connectors to the board and attach it with two pairs of screws. Now connect the touchscreen cable back and screw on the protective plate.

The final touch is to put the cable in place and fasten the case. Now we tighten the two screws at the bottom of the case near the speakers using the Pentaglobe screwdriver.

If everything is over, all that remains is to re-insert the phone card into your iPhone 5S and start the device.

Congratulations on your successful LCD replacement!

IPhone 5S Glass Replacement

If you also need to change the cracked glass on the iPhone, which is often usually combined, since both breaks when dropped, then we will describe below how to replace the glass on the iPhone 5S yourself. Replacing glass on an iPhone 5 is a simple and short-lived process. However, it requires patience and caution, as rushing can damage the display if it can still be triggered after being hit.

Usually, the broken glass of an iPhone is a grid of shattered fragments, so it is better to spread a special rug or oilcloth first. It is better to do the work with gloves.

To separate the broken glass from the die, it is best to use a heated plate separator that directs constantly warm air to the module. If this is not the case, then you can use a regular hair dryer, fixing it permanently.

The glass should be heated carefully so as not to melt the display, the temperature should be no higher than 100 degrees Celsius. In just 7-10 minutes, the glue connecting the screen to the glass will melt a little. The iPhone will become warm. We take a thin metal line and thread it from above between the glass and the touch screen. Slowly and gently cut the space between them, stretching the line from top to bottom. This requires patience and care, as debris can damage the display.

Having separated the broken glass, carefully remove the remnants of the fragments with tweezers, it is better to blow them out, if possible, or remove with cotton swabs. You will see a matrix in the remnants of glue. Carefully, using a flannel cloth or microfiber, having previously and slightly moistened with a liquid for cleaning the boards, remove the remaining glue and gently wipe the touch screen with a clean cloth.

Next, we apply special glue in the shape of a bone to the bottom and top of the screen and carefully attach a new original glass. It is necessary to fix it gradually in order to avoid the formation of air bubbles under the glass. Do not press hard on the glass. Make sure the glass is properly seated around the touchpad button.

After the glue hardens, turn on your iPhone to check how the iPhone se glass was replaced. If your replacement screen does not work well on iPhone 5S, contact a repair shop.

A professional craftsman can qualitatively replace the screen at home. If you like this option - leave it on our website. You can also make a call to a specialist by phone 8-800-775-90-67.

Cases requiring screen replacement for iPhone 5

Replacing the display on the iPhone 5 is required in several cases:

When spots, streaks, stripes appear, which become the causes of shock, fall of the device, ingress of moisture. In such situations, it is advised to immediately contact a certified service center, where technicians will diagnose, establish the basis of the breakdown and troubleshoot. You can simply change the display module, but if you need more serious repairs.
For your iPhone 5 it will be produced when the top layer has obvious cracks. In this case, the display can remain functional, but the view is difficult due to surface damage. This should also be done when the glass is broken but the phone is working.
They change the screen even with severe scratches, returning the gadget to its visual appeal.

As you can see, such restoration with the help of specialists can be quite simple.!

“Running a business without advertising is like winking at girls in complete darkness. In both cases, only you know about your actions ”. Stuart Henderson Britt's words perfectly capture the essence of the situation I am in. Autumn cycle of articles on Apple technology repair has resulted in a young project Approblem.net: iPhone and iPad store and service.

How to replace broken glass display on Apple iPhone 5? Using an example, I will tell and show all the subtleties and pitfalls that can be encountered when replacing the display module of the iPhone 5. If you previously had experience in repairing the iPhone 3GS, it will come in handy, since both devices are disassembled on the front side. The quality of the repair depends not only on the tangent of curvature of the arms, but also on the parts used.

Turn off iPhone 5 before repairing. The next step is to remove the screws from the case at the power connector.

After the screws have been unscrewed, you need to separate the display from the case. The display is held by 4 latches on the sides of the iPhone. The suction cup is attached to the bottom of the display, close to the Home button, with a smooth taut movement, without sudden efforts, pulls up until it clicks. When you hear a characteristic click, stop.

Removing a broken iPhone 5 display needs to be done with extreme care, it is easy to cut with tempered Gorilla Glass. For further work, you need to protect your hands and eyes from glass chips from broken glass. For example, use a wide stationery tape, stick the strip on the iPhone 5 screen as a protective film.

The next step is to separate the display module from the case of the Apple iPhone 5, go along the perimeter with a pick and unfasten the fasteners. Until the screen “hangs” on the loops.

The connectors of the loops are covered with a protective metal plate. Unscrew the retaining screws and remove the plate with tweezers. Use tweezers to carefully disconnect the cables: camera, touchscreen, display. After completing all the above operations, you will receive two parts of the iPhone 5, all further work will be done with the display module.

The quality of spare parts for iPhone and iPad can be divided into three parts: original from donor devices, original without Apple certification and Chinese copies. The former are expensive, and the profitability of their use is very low. We use the latter in our work, the quality is not satisfactory, the tempered glass remains strong, the oleophobic coating repels dirt. Cheap Chinese copies vary greatly in quality, you can run into poorly soldered cables, weak glass and other troubles of this kind.

When installing a new display module on the iPhone 5, in 90% of cases, you will have to transfer peripherals from the broken device. To do this, you need to remove and install a new one: camera, speaker, Home button and a metal protective screen plate. The camera, speaker, second microphone and light sensor are hidden under a protective plate, it is held by two screws.

The camera power cable is glued to the body, in order to disconnect it, you need to warm it up for a couple of minutes on the back with a hot air gun at 160 degrees. Do the same with the Home button, warm up the power cable before disconnecting.

The protective metal shield is fixed with 6 screws and can be removed without any extra effort. If your iPhone 5 was previously repaired, but you forgot to put this plate in place, then the following disadvantages may appear during operation: flickering stripes on the screen from electromagnetic interference, smears on the screen when pressed.

An important point, do not forget to re-glue the plastic guide for the front camera.

New module in the middle. Remove the red tape before assembly. Assembly operations are performed in reverse order. Leave a few drops of super glue in the corners to fix the Home button.

When the display module is fully assembled, it should be tested before final assembly of the unit. Loops are returned to the connectors with a finger press. Iron it gently on both sides so that the outer contacts touch the connector. Turn on the phone and try typical operations: scrolling, dragging, multitouch. Testing the front camera, speaker and brightness sensor.

After the tests, the final assembly takes place. Turn off your phone. Starting from the top, press the long edges of the display until it is connected to the case. Tighten the screws at the power connector, this completes the replacement of the broken Apple iPhone 5 display. The device can be turned on again and a final test of the screen, camera and speaker can be performed. As an example of the work done, a photo, on the left, is a broken iPhone, on the right is a new one.

If an image disappears on the LCD monitor and information is not displayed, and the touchscreen does not respond to touch, replacing the display with an iPhone 5 will help. You can order a home visit in Moscow to Yuda to repair your 5C phone at a suitable cost at any convenient time.

The specialists registered on the site know what measures need to be taken to make the mobile device work perfectly again and to be cheap to repair. Moreover, all the spare parts they use for repair are original, so you can be sure that the smartphone will serve you for a very long time after restoration.

How is the iPhone model 5's display module repaired?

Cracks, scratches, moisture can cause failure of the matrix of the phone, or even the entire smartphone. In this regard, replacing the display with an iPhone of the fifth series does not suffer delay. Our contractors will repair the screen as soon as possible. By contacting the selected specialist, you can find out how much it costs to change the screen to an iPhone 5 in Moscow, and how long it will take to replace the glass with an iPhone 5S or 3GS series.

Replacing the display on the iPhone 5 has some technical nuances. And the thing is that the screen is a single module consisting of a front LCD monitor, a sensor and a protective glass. All these components are interconnected with a special glue, which can be neutralized to restore the iPhone 5 display only with the help of special equipment. And even if the reason for contacting the master was a broken front glass, replacing the display on the iPhone 5 will necessarily include restoring the entire display module.

Also, replacing the display with an iPhone of the fifth series is required:

if the LCD monitor is broken and has smudges or streaks
when the screen flickers
if the touchscreen breaks down
if stripes, squares, artifacts appear on the iPhone 5S, 3GS screen
with a broken front body

In any of these cases, the replacement of the screen with an iPhone 5 will be performed by a master using professional equipment and high-quality components, including the original display module. If necessary, a specialist can also change the phone case at an affordable price. Replacement of the modular display will be carried out after free diagnostics of the device.

How long will it take to install the display module?

Most of the activities that involve repairing an Apple smartphone do not take a lot of time from an experienced craftsman. These services include replacing the module with an iPhone 5S, 3GS and other series. This work is carried out using only high-quality components and professional equipment, and, as a result, in a short time, regardless of the type of breakdown.

It is not difficult for our performers to install a new screen on an iPhone, their experience allows them to guarantee high speed of work. Typically, Apple phone screen recovery takes one hour. Urgent repairs can be completed in 30 minutes, including free diagnostics.

When ordering the services of private craftsmen on Yuda, you get a lot of advantages:

the repair of screens is necessarily preceded by the diagnostics of the device, since the cause of its malfunction can not always be determined by visual inspection
a refurbished phone or iPad is usually covered by a warranty (for the entire device, not just the installed part)
to make sure that the smartphone works fine after repair, the masters must carry out control testing
private craftsmen are always ready to offer low prices for installing glass, a new case, repairing a touchscreen or matrix iPhone 5C, iPad, etc.
any repair of smartphones is carried out exclusively using original spare parts
urgent repair of mobile devices (iPad, iPhone 5C) is carried out at the client's home, which means that you do not need to go to the service center, which will save time and money

If you need to urgently replace the display on the iPhone 5 or repair the phone matrix in Moscow, contact the specialists registered in Yuda.

How much does it cost to change the screen on a smartphone?

The wizard will be able to answer the question of how much it costs to replace the screen on an iPhone 5 only after carrying out diagnostics. Replacing the display on the iPhone 5 involves not just installing a new glass, but also restoring the entire module, as well as the case and the Home button. Naturally, this need significantly increases the cost of the repair itself. In addition, the technical complexity of assembling this smartphone model involves repairing it only using professional equipment and original spare parts, which, in principle, cannot be very cheap.

Craftsmen registered in Yuda will diagnose an Apple smartphone in your presence, after which they will dismantle the failed part and replace it with a new one.

The cost of repairing an iPhone Series 5 includes:

device diagnostics
assembly and disassembly of the phone using professional equipment
installation of new parts in place of those that have failed
control testing of the smartphone after repair

If you want to repair your gadget cheaply, contact a specialist registered on Yuda. You can name your price or choose the contractor who offers their services at a suitable cost. Replacing the display with an iPhone 5 will be done quickly and efficiently.

Despite the fact that the iPhone 5s is one of the strongest and most durable smartphones Apple, you can break the display on it. Fortunately, the process of replacing the iPhone 5s display isn't very difficult. How to change the display of iPhone 5s at home was described in this guide.

Difficulty: Medium.
Time required: 30-60 minutes.

What is needed

Phillips (1.2mm, 1.3mm, 1.6mm and 1.7mm) and pentagonal (Pentalobe) screwdrivers.
Plastic tool.
Dielectric blade (Spudger).
Sucker.
Tweezers.
New display for iPhone 5s.

Step 1. Remove the two 3.9 mm star screws near the Lightning connector.

Step 2. Attach the suction cup over the Home button. Be sure to make sure the suction cup is securely attached.

Important! The front of the iPhone 5s is secured with clips. You need to loosen the clips without damaging the cables connecting the front and back of the device. Therefore, it is important to proceed with the utmost care.

Step 3. Pull the suction cup up while holding the bottom of the iPhone. The goal is to slightly separate the bottom of the front panel from the case. Gently pry the edges with a plastic tool to detach the back from the front. Important! On iPhone 5s, the front panel is very tightly attached to the back, much stronger than most other smartphones.

Important! Do not try to completely detach the front panel from the back of the case at this stage. Otherwise, you can break the trains.

Step 4. Detach the suction cup from the display.

Step 5. Lift the front of the case so that it becomes possible to disconnect the ribbon cable leading to the Home button. Important! The train must not be pulled too tight. If you tear it, the Touch ID fingerprint scanner will stop working, and only Apple Authorized Service Centers can return it to working condition.

Step 6. Remove the bracket from the connector using tweezers.

Step 7. Disconnect the ribbon cable using tweezers. Important! When detaching, you must be very careful and detach the ribbon cable, and not the entire connector. The same applies to all the following steps in which you need to detach one or another loop.

Step 8. Open the iPhone 5s to an angle of about 90º and lean the front against something. An excellent option would be the iPhone box. For the best fit, the box and smartphone can be secured with an elastic band.

Step 9. Remove the two 1.6mm Phillips # 000 screws holding the metal plate that secures the battery connector to the motherboard.

Step 10. Pull out the plate using tweezers.

Step 11. Using tweezers or a dielectric spatula, remove the battery cable from the socket on the motherboard.

Step 12. Unscrew the screws:

One 1.7mm Phillips # 000 screw.
One 1.2mm Phillips # 000 screw.
One 1.3 mm Phillips # 000 screw.
Another 1.7mm Phillips # 000 screw.

Note that the last 1.7mm screw is not magnetized to the magnetic screwdriver, so be careful with it.

Important! When assembling your smartphone, be sure to install the screws only in place. Using the wrong screws, such as 1.3mm instead of 1.7mm, may cause permanent damage to the motherboard.

Step 13. Remove the metal cover.

Step 14. Detach the front camera and sensor ribbon cable.

Step 15. Holding the bezel, disconnect the display cable.

Step 16. Disconnect the touch display connector.

The front panel is completely detached from the back! Set the back aside.

Step 17. Remove the Phillips # 000 screw that secures the Home button ribbon cable.

Step 18. Move the ribbon aside using a plastic tool or tweezers.

Step 19. Remove the two 1.4mm screws that secure the metal plate above the Home button.

Step 20. Remove the plate.

Step 21. Disconnect the Home button ribbon cable from the front panel. Important! At this stage, the button itself cannot be removed, it is still attached to the front panel.

Step 22 Gently press down on the upper left side of the back of the Home button in order to separate it slightly from the case. Important! Do not press hard and under no circumstances separate the button completely. You only need to free the corner.

Step 23. Carefully pry the Home button from the back using a dielectric spatula.

Step 24. Remove the Home button. You no longer need the old display.

Step 25. Assemble the smartphone with installation