Android 4.3 kitkat firmware for galaxy n7000. Firmware Samsung Galaxy Note n7000

Surely many do not want to wait for the official samsung update Galaxy Note on Android 4.0 and want to flash their smartphone today. So I decided to write this small instruction so that everyone can quickly and successfully do this. Immediately I draw your attention to the fact that you do all the manipulations with your favorite phone at your own peril and risk, and neither I nor anyone else will be responsible in case of his untimely departure.

But be alarmed, everything is not so scary, and after spending about 15 minutes of your time, you will get an updated, gorgeous Android on your smartphone and a bunch of other goodies.

First steps

So, taking the smartphone in hand, immediately copy the contents of the folder efs to a safe place. Since you have to do "full wipe", you need to save all the necessary data from your phone, make a backup of SMS, contacts and any other required files, applications, etc. The latter can be done using the utility.

Preparing for firmware

• The firmware itself, for example

We unpack the whole thing into a folder on the PC, and take out the cable from the table (box, box) to connect the phone to the computer. Now you need to upload the firmware file in the archive to the root of the memory card, in this case it will be called ICS_Stunner_1.4.26.1.zip.

Technical process

1. Turn off the smartphone, connect the cable to it and the PC, put it in the "download" mode. To do this, you need to simultaneously hold down the keys: power on, volume down and the center button. A green robot appears.
2. Next, you need to run the program for the firmware itself, namely the file Odin3 v1.85.exe from a previously downloaded set. We don't change anything in Odin, just select the CHAINFIRE REPACK I9220LP1-N7000-ICS-REPACK.tar file in the "PDA" item. That's it, now we press "Start" with an almost firm hand.
3. We are waiting for the end of the process, after which we reboot the smartphone.
4. We go into recovery mode and select the item "wipe data / factory reset" there. This will destroy all data in the smartphone! It is not necessary, but highly desirable, to do some kind of "brain cleaning".
5. Select "install zip from sd card" and find the previously downloaded firmware file on the memory card, select it and press confirmation. The process takes less than a minute.
6. We select "reboot system now" and enjoy the flashed smartphone.

Video: firmware Samsung Galaxy Note on Android 4.0.4

There is no official Android 4.3 firmware yet, but we can test CM10.2 (Android 4.3)!

Attention! All operations with the firmware of your device you do at your own peril and risk! We will not be held responsible for anything that happens to you or your device as a result of using the information in this manual.

Preparing for firmware:

• The firmware is for Galaxy Note N7000 only. Please do not try to install on other devices.
• Make sure the drivers for your device are installed on your computer.
• The firmware will destroy all your data. Proceed at your own risk.
• You need to enable USB debugging mode which is disabled by default.
• Your smartphone must have at least 70-80% charge.
• Make sure to back up all data in your phone memory before proceeding.

Instructions for installing ROM Android 4.3 on N7000 (Note 1):

1. Download Android 4.3 CM10.2 ROM and Google Apps for Galaxy Note N7000 to computer.
2. Connect your smartphone to your computer using a USB cable.
3. Now throw the downloadedAndroid 4.3 ROM and Google Apps files to SD card. Make sure the files are in the root directory of the SD card (not any folder).
4. Then turn off your phone and disconnect from the USB cable.
5. Now download Recovery.Turn on the phone by pressing and holding the Volume up + House + Power buttons together until the screen flashes, release the three buttons then. After a few seconds, that phone will enter recovery mode.
6. In recovery, make a Nandroid backup by selecting:Backup and Restore ›› Backup.
7. Select: Wipe Data / Factory Reset ›› Yes.
8. Return to the main recovery menu by selecting: ›› Go back
9. Select: Wipe cache partition ›› Yes.
10. Select: Advanced ›› Wipe Dalvik Cache ›› Yes.
11. Select:flash zip from SD card ›› choose zip from sdcard ›› Android 4.2.2 ROM ›› Yes.
12. Select:flash zip from SD card ›› choose zip from sdcard ›› Google Apps ›› Yes.
13. Select: Go Back ›› Reboot system now.

That's all!You now have the latest CM 10.2 Android 4.3 ROM Jelly Bean on your Galaxy Note N7000.

The Galaxy Note N7000 can now be upgraded to Android 4.4 using a custom firmware called OmniROM KitKat Nightlies.

An experienced team of professional OmniROM developers, without giving up and not stopping at what has been achieved, confidently asserts that the "young" firmware is in no way inferior to its competitors. The speed of the specialists working on OmniROM is also encouraging. Thanks to these advances, Samsung Galaxy Note N7000 owners have an excellent opportunity to update their device to the latest version - Android 4.4 KitKat. Let's take a look at the main steps in installing this operating system.

It should be noted that this firmware is based on AOSP Android 4.4, while it contains a certain number of unique features, among them: a small window designed for incoming calls, it will constantly pop up; it is possible to quickly change settings; a permit is issued to operate each application separately; there is support for the fact that different windows can work at the same time.

OmniROM KitKat Nightlies is a night build, which still contains some bugs and bugs. You can inform the developers about them.

Now we move on to the preparatory stage of the Samsung Galaxy Note firmware:

This guide should only be applied to the Samsung Galaxy Note, which has the model number N7000;
- Next, you should get and install the latest version;
- In order to install OmniROM KitKat Nightlies, you need to perform a Factory Reset, this means that all information that is stored in the system partition is deleted. However, the internal and external storage will remain intact.
- Must be created for apps, texting and so on.

Let's proceed to the following steps:

On your device it follows;
- You should create a Nandroid backup, which will allow you to return to the previous firmware version at any time;
- Be extremely careful and follow the guide without changing items;
- The battery of the Samsung Galaxy Note N7000 needs to be charged.

Update Samsung Galaxy Note N7000 to Android 4.4 using custom firmware OmniROM KitKat Nightlies

To do this, we perform the following actions:

Download the latest version;
- Also download;
- Connect the smartphone itself to your computer or laptop and then move both files. Archives should not be unpacked;
- Then disconnect the Galaxy Note N7000 phone from the computing equipment, then turn off your gadget;
- You need to load your smartphone in recovery. To do this, squeeze and hold for a certain time Power, Home, Volume Up until recovery appears on the screen itself;
- After you are in recovery, you need to create a Nandroid backup: select the option - backup and restore... Such a file must be given a specific name and saved in the internal storage memory;
- In the main menu choose wipe data / factory reset and confirm the process;
- Then proceed with the direct installation of the update file. Next, you need the option install zip from sdcard and choose zip from sdcard, find there OmniROM KitKat Nightly zipthen start the installation process;
- After installing the update file, you should do the same procedures only with the Gapps file;
- After installing such files, return to the menu;
- Reboot your device to normal operating mode. The first reboot may take more than five minutes. If the smartphone is frozen, go back to recovery and repeat the procedure. If something doesn't suit you, remember that you can always use Nandroid backup.

Galaxy Note N7000 users can now enjoy the latest KitKat features in a fast and highly stable release, thanks to the release of Android 4.4.4 based on C-ROM Build 7.1 from hardworking C-ROM developers.

Custom C-ROM Build 7.1 is based on the latest AOSP release. It brings many new features with an oil-smooth interface on the latest KitKat firmware.

Features of Android 4.4.4 C-RoM Build 7.1

Here is a short list of the main features ported to the latest Android 4.4.4 C-ROM firmware:

• Pie
• Halo
• App Bar
• Dark C-ROM
• Active display
• Floating windows
• Gesture Anywhere
• On-The-Go Mode
• Control animation
• LockScreen Notifications
• App Sidebar Implementation

Interested users can reflash Samsung Galaxy Note N7000 by following the step-by-step guide provided below.

IBTimes UK reminds you that it will not be held responsible for any damage to your device during or after installing the firmware. Users are advised to proceed further at their own risk.

Preconditions

• The ROMs and instructions in this manual are for the Galaxy Note H7000 only. Check your device model by going to Settings\u003e About phone.
• Back up your data and settings using the recommended recovery tool like ClockworkMod (CWM) or TWRP, as it creates a complete image of existing phone installations. On the Recovery menu, select Backup & Restore and click Backup.
• Make sure the appropriate uSB drivers for the phone are installed on the computer.
• Make sure your phone has USB debugging mode enabled by navigating to Settings\u003e Developer options (NOTE: Press the phone's build number seven times to unlock or reveal hidden developer options under Settings.) Then select the checkbox to enable debugging mode USB.
• Make sure the phone has at least 80% battery power to prevent unexpected shutdown of the device (due to battery drain) when installing rum.
• Make sure your device is unlocked (not tied to a specific carrier) and is powered by the latest ClockworkMod (CWM) Recovery (v6.0.4.5 or higher) installed. If this is your first time installing CWM recovery application, check out the video tutorial below:

• If your device is stuck at boot or experiencing boot loop issues, clear the cache partition and Dalvik cache a few more times before rebooting.
• Allow the newly installed rum to stabilize for five minutes before starting to work on it.

Required downloads

- Android 4.4.4 C-Rom firmware
- Compatible Android 4.4.4 KitKat Google Apps
- Philz Touch Recovery v6.07.9 (CWM Recovery 6.0.4.5 -\u003e save the .tar file via Odin v3.09)

How to flash Samsung Galaxy Note N7000 using Android 4.4.4 KitKat C-Rom firmware

Step 1 - Download custom ROM Android 4.4.4 C-ROM.

Step 2 - Connect and mount your phone storage to your computer using a USB cable.

Step 3 - Now copy the downloaded C-ROM zip file to the root folder on your phone's SD card.

Step 4 - Turn off your phone and disconnect the USB cable from your computer.

Step 5 - Now boot your device into recovery mode by pressing and holding Volume up, Home and Power button together.

Step 6 - Once the phone enters CWM Recovery, execute full reset data by clicking Wipe Data / Factory Reset. Use the volume keys to navigate between options and the power button to select an option in recovery mode.

Step 7 - Then reset the cache partition and wait for the process to complete.

Step 8 - Also reset the Dalvik cache. To do this, go to ‘advanced’ options and then click reset Dalvik Cache. This will help prevent cyclic download issues or any other download errors associated with software installation.

Step 9 - Then go back to the main recovery menu and select Install Zip from SD card.

Step 10 - Now click Select Zip from SD card. Use the volume keys to navigate to the C-RoM zip file you previously copied to your phone's SD card and select it by pressing the power button. Confirm disk installation on the next screen and the installation process will begin.

Step 11 - After the installation is complete, go to the section “+++++ Return +++++” and select reboot the system from the menu.