Remove the crack on the smartphone display. We remove scratches from the phone screen: effective ways and methods

Answers on questions

Even if you use your mobile phone with extreme care, scratches sometimes appear on it. Small and inconspicuous damage to the touch screen can cause discomfort to the owner during use. What should you do if these flaws appear on the display, and how to take care of the gadget so that even after long-term use it looks like new?

The most common causes of damage

A new smartphone rarely manages to maintain its perfect appearance for a long time. The back of the device is usually erased, and small abrasions appear on the display. What leads to their formation? Large cracks are most often caused by dropping the phone from a height onto a hard surface. This mostly happens by accident, for example, when the owner drops the gadget while trying to get it out of his pocket or purse.

It should also be remembered that the contact of the screen with solid objects - for example, keys, a lighter and even small change - can lead to the formation of scratches. Therefore, it is important to carry your smartphone in a special case in a separate pocket. Also, your fashionable gadget will quickly lose its presentation if you take it with you to the beach. Even the smallest grains of sand are hard enough to damage the display surface.

Ways to get rid of scratches

Scratches can be removed in any service center, where specialists can return the damaged screen to its previous appearance. But you can try to do it at home.

Immediately, you need to warn that removing scratches from the touch screen in these ways is always risky. Therefore, before you get down to business, consider whether you can carefully follow the necessary procedures.

Helpful Information: Before removing scratches from the touchscreen, cover all ports on your phone to prevent moisture or foreign objects from entering. This can be done using ordinary tape.

Toothpaste or powder

The toothpaste will help get rid of minor scratches

The most common option for removing scratches from a touchscreen is to use toothpaste or toothpaste.

To get rid of blemishes in this way, you need to apply a thin layer of paste or powder to the display and rub the product into the display in a circular motion. Then you need to wait until the substance on the screen is completely dry. Finally, wipe the display with a damp cloth or cotton pad.

Minor scratches will then become less noticeable. However, if the touchscreen is deeply damaged, you will not be able to get rid of it this way.

Baby powder or baking soda

Baking soda is also used to remove damage from the display.

These two points can be combined into one, since they differ only in ingredients, and the principle of application is the same. So, to remove scratches from the screen, dilute baby powder or baking soda to a mushy consistency and apply the mixture to the damaged areas of the screen using a cotton pad or sponge. Then wipe off the residue with a tissue and dry the display.

Sunflower oil

Sunflower oil will restore the lost shine to the screen

This method is less effective than the others. With the help of vegetable oil, you can get rid of only minor scratches, and even then - only for a short time. But there are also pluses: after applying oil to the screen, it will regain its former shine.

Car and furniture care products

Car care products can help remove shallow scratches from the touchscreen phone screen

Polish and furniture care products can also be used to remove scratches from the touch screen. Apply the product of your choice to your phone screen and polish the surface with a cloth. For the same purpose, you can use furniture polish. The effectiveness of this method depends on the depth of damage on the screen and the quality of the selected polish. Judging by the reviews, the described method helps to get rid of superficial scratches that are shallow in nature.

Sandpaper

Sandpaper should be used very carefully

This method seems simple only at first glance. In fact, only patient and accurate people should use it.

Fine-grained abrasive paper is ideal for polishing. It must be used as a roller. In the process of polishing the screen, do not rush in any way so as not to ruin it.

Helpful Information: After the work done, you will notice that the touchscreen is dull and dull. Sandpaper gives this effect. To restore the shine of the screen, apply some GOI paste on it. After completing the procedure, wipe the screen with microfiber.

Paste GOI

GOI paste is the most effective remedy

GOI paste was created back in Soviet times at the State Optical Institute. It is a fairly soft abrasive material that is used to polish ceramic, metal and optical products. It is also suitable for smartphone displays.

This paste is perhaps one of the most effective and affordable touch screen polishing materials. When choosing a GOI, consult with the seller, since there are 4 different types of this substance. It is necessary to apply it to the surface of the touch screen with a special cotton cloth or napkin.

To get started, take a small amount of the paste on a cloth and wipe the touchscreen without applying too much pressure. Do not hurry. Apply the abrasive in layers, one by one. It is advisable to take short breaks and let the paste dry. The desired effect may not appear immediately. After completing the procedure, wipe the screen with a previously used cloth (do not forget to rinse it in clean water before that). Finally, wash your hands thoroughly.

Displays polish

You can buy special polish for displays in any supermarket

For this, special means are invented to eliminate various scratches from the screen better than others. We recommend purchasing a polishing compound for touch screens at any hardware store. This remedy may not completely remove the scratch, but it will help hide it. Any damage to the display will become less noticeable.

Suede

The effectiveness of using suede is highly questionable

Despite the positive reviews, this method is less effective than most. A soft cloth will not help you get rid of visible scratches, no matter how much you rub the screen with it.

For devices with tempered glass (Gorilla Glass)

Gorilla Glass - shockproof glass for smartphones

This method is ideal for removing scratches from screens made of Gorilla Glass. This material is more durable than normal, but, unfortunately, it is not immune to scratches. The main disadvantage of Gorilla Glass is that it is difficult not only to scratch it, but also to get rid of damage.Toothpaste will definitely not help here, you will have to use more radical methods.

Think about bringing the Gorilla Glass touchscreen into proper form only as a last resort: if the display is badly damaged and scratches prevent you from using your smartphone. Instead of changing your screen, try polishing it up. Polishing your display at home can save you a lot, and the risk of increased damage is minimal.

Grinder in combination with GOI paste

A sander and GOI paste will help remove scratches from Gorilla Glass

The sander will help you do the job of removing scratches more "smoothly". Thanks to the high speed of rotation of the tool, you will be able to qualitatively polish the screen and eliminate even the largest and most noticeable defects. If you don't have such a tool at hand, you can use a simple drill.

First, use a sponge or microfiber cloth to make a polishing wheel (called a roller). Apply the paste on it with a thin layer and proceed to polishing.

Helpful Hint: Start at low speed and keep track of the process. It is not worth polishing one area of \u200b\u200bthe display for a long time, as you can overheat the glass.

Preventing scratches on the display

To avoid the appearance of scratches on the smartphone screen, remember the rules of prevention

In order to avoid even the smallest damage to the screen, it must be properly looked after from the first days of use. Follow a few simple rules. Namely:

From the first day of use, keep your phone in a silicone or rubber case.
Be sure to stick a protective film on the screen.
Do not take your smartphone with you to the beach and do not carry it in the same pocket with keys and other metal objects.

Using a protective film

To protect the screen, you can use both a special film and stationery tape. The second option is more budgetary. In order to stick a strip of tape on the screen, it is important to accurately cut the piece to the correct size. And remember: if you stick the tape inaccurately, the phone will look terrible.

Better, of course, to use a special protective film, and you should not save money when buying it. In order to hide all scratches, use a film with a silicone base. It will fill in small scratches on the screen so they become invisible. It is better to do this immediately after buying a smartphone, replacing the screen will cost much more.

It is worth noting that all of the above methods of removing scratches from the phone's touch screen are only suitable for shallow scratches. And do not forget that with inept use of many of the above tools, you can completely ruin the screen and make the scratches more noticeable. Therefore, before you start eliminating screen defects at home, think carefully about whether you can do it carefully and accurately. In order not to damage your favorite phone, first try your chosen method on any old phone.

According to statistics, cracks that appear on the screen as a result of not too careful handling of mobile gadgets are the most frequent reason for contacting repair shops. And this is not surprising, because the display is the notorious Achilles' heel for any, even the most expensive and eminent mobile phone. What to do if the screen is cracked on the touchscreen phone, let's figure it out together.

What to do if the phone screen is cracked?

So, there is a problem - after the fall, cracks appeared on the screen of the mobile phone. How to act in this situation and how dangerous are they both for the phone itself and for its owner? It all depends on the degree of damage received. For example, if there are one or two cracks, and they do not interfere with the normal operation of the mobile gadget, it is quite possible to do with half measures - stick a protective film or glass over the screen. In this form, the phone will be able to work for a long time, and dust and moisture will not be able to get into it through the cracks. But if the screen is covered with craquelure from the smallest cracks, then you cannot do without a visit to the repair shop. The touch screen can be fully restored only if it is replaced using special equipment. At the same time, you need to be prepared for the fact that replacing a cracked screen can result in expenses equivalent to half the cost of a new mobile phone. Therefore, in some cases, it makes sense to think about replacing a broken gadget with a new one.

Is a cracked phone screen harmful?

Mobile technologies appeared not so long ago, but immediately overgrown with many myths and speculations regarding the harmful effects on the human body. In particular, you can often hear the opinion that a cracked screen turns the phone into a time bomb. But in fact, the only harm that, hypothetically, it can cause is to scratch the wearer's skin during a conversation.

Unfortunately, on the road, not a single motorist is immune from minor but annoying troubles. Even with very careful driving, a stone can fly out from under the wheels of an oncoming car and damage the windshield of your car. In such a situation, the owner of the damaged car is faced with the question of how to remove the crack on the windshield? Go to a car service or try to fix the problem yourself? Today we will tell you how to fix a crack on the windshield with your own hands and not overpay for expensive repairs, but this, of course, if the glass is not completely crumbled and covered with cracks like a cobweb.

Damage types

You should immediately clarify what mechanical damage can be repaired by yourself. These types of damage include:

Chips. They need to be eliminated immediately so that branching does not go.
Simple cracks formed as a result of a sharp and constant temperature drop. This can happen if the vehicle is not warmed up properly and the temperature conditions are not observed inside and outside the passenger compartment.
Chipped. The reason for their appearance is mechanical impact.
Branched cracks. Unlike simple cracks, such damage is difficult to remove. Sometimes an untimely solution of the problem can lead not only to the appearance of deep branched cracks, but also to a complete replacement of the windshield.

Important! Any mechanical damage can lead to complete unusability of the glass, if not removed in time.

What factors lead to cracks?

Automotive glass can be mechanically damaged by being hit by a foreign object. However, glass cracks can also occur for other reasons. Here are just some of the possible causes of damage:

Sharp temperature fluctuations. This is one of the main reasons. If a stream of cooled air enters the heated glass, and vice versa, when a hot stream of air is supplied to the cooled glass, a crack may appear. Often, damage is recorded in the place where the wiper is heated.
Poor quality glass. A gross violation of production technology can lead to damage to the glass, which simply cannot withstand too much stress.
Severe deformation of the vehicle body. In this case, the crack does not form immediately, but gradually.
Unnoticed chips that lead to glass breakage.

How to avoid the problem?

There are now various proposals on the market for windshield protection. One of the most popular options is a sticker of a protective film that protects an expensive car part from mechanical stress.

In addition, the car owner himself should adhere to the following rules for operating the car:

Check the degree of heating of the windshield and rear window. Do not blow cold air onto hot glass.
Replace the part only with a quality version.
Regularly inspect the vehicle for chips and other defects. If damage is found, fix it securely with a special sealant to prevent the crack from branching.

Important! If on the way you "caught" a pebble, then, first of all, it is necessary to prevent dust and dirt from getting into the crack. Cover the damage with tape along the entire length. This not only protects the crack from further deformation, but also makes it easier to finish cleaning later. Otherwise, the dirt accumulated at the bottom of the chip will be visible inside the glass after repair.

Can a crack on a windshield be repaired?

There is an unequivocal answer to this question - it is not only possible, but also necessary. Many drivers are in no hurry to solve the problem and drive with damaged glass. But with such a ride, other problems arise:

Visibility on the road decreases.
The crack glares in the sun, distracting the driver.
The level of driving safety is reduced.
Excessive loads and pressure have a destructive effect on cracks. And this can lead to serious consequences and a problem that only experienced craftsmen can solve.

In order not to bring the matter to an expensive repair or replacement of a part, we suggest that you familiarize yourself with the repair process and remove the crack on the glass yourself, in a timely manner. Moreover, the professional services of most car services are not designed to eliminate one single problem.

How to remove a crack in the glass?

The essence of the repair is to fill the damage with a special photopolymer composition to the full depth. The glue will serve two purposes:

Will connect the edges of the crack and prevent it from growing.
Will make damage practically invisible, due to the fact that the refractive index of the product is approximately equal to the refractive index of glass.

So, for self-repair of damage, you will need the following materials and equipment:

Photopolymer glue. The product is designed specifically for automotive and other glasses. The solidification of the polymer occurs due to the action of directed ultraviolet radiation. Curing time: 15 minutes with UV lamp, 45 minutes with natural drying.
Ultraviolet lamp.
Plastic (disposable) or metal (reusable) glue injector.
Applicators for attaching the injector to the glass.
Electric drill with diamond drill. It will help relieve internal stress in the glass and prevent further deformation.
Vacuum pump. A tool is needed to remove air from the crack.
Mirror to define the boundaries of the defect
Scrubber for cleaning damaged surfaces.
Cleaning liquid and wipes to remove moisture and dirt.
Alcohol (medical or isopropyl alcohol) for degreasing the repair site.

Important! Instead of a drill, you can use a dental bur, which is sold at Medtekhnika. Use it carefully so as not to drill through the glass.

Having prepared the necessary set of tools and materials, proceed with the repair, guided by the following instructions.

Step-by-step instructions for repairing cracked glass:

Thoroughly clean the glass and crack edges from dirt. Use a degreaser and a pump for this purpose. Blow out all road dust and dirt from the damage, degrease the entire repair area. The quality of the entire repair process depends on how well the preparatory activities are carried out.
Release the tension on the glass. This must be done so that in the process of further measures the scale of damage does not increase. Perform this procedure with a drill as follows:
1. At a distance of 2 mm from the crack, drill a through hole towards the expansion of the damage.
2. Bring the crack to the hole with slight pressure. As a result, the crack will reach the drilled hole and will not go further.
Scrub the edges and area of \u200b\u200bdamage with a scriber.
Treat the prepared area with napkins dipped in a special cleaning liquid. You can degrease the surface with alcohol.
Allow the damaged area to dry out.
Prepare polymer adhesive according to the instructions.
Install the injection support (bridge). To securely fix the bridge on the glass, grease the suction cup with Vaseline and install so that it is located directly over the damage.
Prepare the injector for use. For this:
1. Remove the oil seal.
2. Pull the piston down.
3. Put a few drops of glue into the injector.
4. Lift the adhesive up to the top of the cylinder with the piston.
5. Place the adhesive injector onto the bridge using the applicators. Make sure the center of the injector is aligned with the center of the crack.
Raise the plunger and let it sit for 1.5 minutes to allow the adhesive to completely fill the damage.
After filling the entire crack with glue, stop pumping. Remove the injector and bridge.
Place a UV lamp over the crack for 15 minutes.
After the glue dries, remove any residue from the glass using a mounting knife blade.
Polish the repaired surface with a soft cloth and polishing paste.

The renovation is completed. Subject to the entire sequence of measures, the crack will become invisible.

You can use a special kit for the introduction of photopolymer glue. It is produced by many manufacturers. The set consists of glue and accessories. When buying a product, give preference to world famous brands - Done Deal, Permatex, Abro.
It is most convenient to observe the process of pumping glue from the interior of the car, illuminating from the side with a flashlight or a portable lamp.
UV curative lamps for home use are excellent for curing the adhesive. If you have such a device, then use it. You can wait for the glue to dry completely and naturally. But this process can take up to 10 hours.
After removing the glue injector and applicator, apply a clear finishing film to secure the product and lay it flat on the glass surface. Lay the plastic from the center out to the outside to prevent air bubbles from forming underneath. Smooth out the film with a flat object. You can remove the film after the glue dries with a plastic scraper or a wooden plate.

Glass surrounds us everywhere: windows, doors, dishes, transport and more. Cracks often form on the glass, so you need to know how to act in this situation. If the crack is huge, with a wide gap, then you need to contact the professionals in your field, but if it is insignificant, then you can cope with the problem yourself. You can seal the crack on the glass yourself, the main thing is to use a proven method.

How to repair a crack in a window pane

It is quite possible to remove the crack on the window glass, however, you have to work hard.

Preparatory stage

Before getting down to business, it is necessary to prepare the surface for the procedure. This will require washing the glass on both sides. It is necessary to carry out the procedure with rubber gloves; you can use any product intended for caring for windows for washing.

After all the dirt and accumulated dust has been removed from the glass surface, wipe it dry with a lint-free cloth. The glass must be absolutely dry, otherwise the result after the crack is glued will quickly disappear.

Degreasing

After you have made sure that the glass is clean and dry, it must be thoroughly degreased. Professionals recommend using the material at hand, acetone or gasoline will do.

It is important to pay attention to the fact that after the degreasing stage there is no lint left on the glass from the napkins.

Elimination of the crack

You can glue the crack in the window glass using silicone glue purchased from the store, or you can prepare the repair composition yourself.

Removing the crack with silicone glue

This product is irreplaceable when working with glass. On sale you can find tubes with a wide or narrow neck. If you purchased the first option, then it is more convenient to work with the material by typing a sufficient amount of glue into an ordinary medical syringe; if you bought the glue of the second option, then you will not have to do additional manipulations.

By lightly pressing on the tube or plunger of the syringe, you need to fill the crack with glue. It is important that no voids remain.
If the crack is wide enough, then you need to glue it on both sides with tape. After the glue is dry, the tape can be easily removed.
Wait for the right time. How much is indicated in the instructions on the package. The glue can dry for 12 to 24 hours.
After the glue dries, you need to clean the surfaces from excess material.
In conclusion, you need to use ordinary nail polish, it is important that it is transparent.

After such work, the glass can be subjected to water treatments.

DIY glue

If there is no silicone glue at home, you can prepare the glue base yourself. For this you need:

Mix equal amounts of turpentine and acetone.
Gradually add crushed foam to these components. It should dissolve in the prepared solution. In order for the foam to dissolve quickly, you need to grind it as small as possible.
As a result of cooking, a transparent, viscous mixture should be formed, resembling honey in consistency.

other methods

If you have a barely noticeable crack on the window, then it would be wise to do without lengthy procedures for patching up the chip. You can use regular clear nail polish, in some cases classic stationery glue will do.

If you are in doubt about your skill, then using scotch tape will do. You need to seal the crack with transparent tape on both sides. But you must be prepared for the scotch tape on the window to be visible, and such repairs will not last too long. Therefore, the tape will need to be changed from time to time. The fact is that condensation will form, so the tape will simply come off.

How to seal a crack in glass in doors and furniture

If the doors or pieces of furniture in your home have glass inserts, then you have probably come across cracks in these glasses.

In this situation, you can proceed as follows:

If the crack is of an impressive size, you can see it, then you can order a replacement element on the manufacturer's website or from a company representative.
If the first option is not suitable for you, then you can try to hide the crack: paint over it with varnish, then decorate the problem with professional paint or ornament.
You can also use the methods described above to eliminate cracks in the window glass.

Let your doors and furniture always fill the interior with aesthetics!

How to repair a crack in glassware

To seal a crack in glassware, you can use any of the above methods, or use the grandmother's method:

You will need to use a burner, with its help you need to slowly warm up the problem area.
Additionally, you need to heat a glass stick.
With a softened stick, you need to solder the crack, starting from one of the ends.
You need to act this way until an even seam is formed, which will eliminate your problem.
In conclusion, you need to melt and anneal the seam.

Cracked glass is no longer a problem for you!

The undoubted convenience of a tablet computer or a modern smartphone lies in the touch display - it is very easy to work with it. But this is overshadowed by ugly cracks on its surface. You can prevent damage by sticking a protective film on the device immediately after purchase, but it adversely affects the sensitivity of the touch cover. It is worth taking a closer look at how to get rid of scratches on the screen of a phone, tablet or any other touch device.

Professional remedies

Pastes and liquids specially formulated to remove damage from glass surfaces contain aggressive ingredients that help to achieve good results, without damaging the device itself.

Often, to use professional-grade products, you need a special napkin or cotton pad, which will make it much easier to apply the composition. Sometimes these devices come with the drug. With funds from the stores, you can properly polish the iPhone and any other devices.

Paste GOI

The choice of display polishing is in direct proportion to the depth and intensity of damage. Some people, trying to find a way to remove scratches from the phone, immediately remember the well-known GOI paste. In it, the role of an abrasive is assigned to a special powder based on chromium oxide, and the paste itself is of several varieties. To remove scratches from a smartphone sensor, an option with a minimum abrasive effect is suitable. Before processing, it is necessary to protect the sides of the device with adhesive tape so that the composition does not penetrate into holes and crevices. The paste can be produced in different forms, which are determined by the method of use:

Displex paste

This tool is more effective and modern. Displex paste was created specifically for touch screens.

It is produced in the form of small tubes, with which it is very convenient to apply the mixture to the surface due to the presence of a pointed nose.

To get rid of scratches, you need a light and soft enough cloth. Color is important because polishing will make the fabric darker, which will provide control over the result.

After finishing the procedure, thoroughly dry the glass surface with a cloth and check its condition.

Using this method, you can also clean the glass of the built-in camera to take the best possible photos.

The cost of special formulations

If there are scratches on a mobile gadget, users turn their attention not only to the effectiveness of the drug, but also to its price. You can hide defects and improve the appearance of your favorite device at an affordable price. For example, GOI paste can be bought for 70 rubles for a 45-gram container. This volume should be enough for a long time. A foreign composition is somewhat more expensive - at a cost of 200-400 rubles, you will get a small tube of 4-6 grams. Special drugs can be purchased on the Internet, but it is advisable to first study the reviews about them and the delivery conditions.

Folk remedies

When thinking about how to get rid of scratches on your phone with home remedies, you need to understand the risks. Owners of mobile devices who decide to polish scratches on them often encounter insufficient effectiveness of their home remedy.

Various methods are being tried to improve the condition of the touch glass, for example, by making a mixture of water and baby powder. The effect of such tricks is in direct proportion to the depth of the defects.

Before how to remove a crack from the screen phone with folk remedies, the device needs to be prepared:

Turn off the gadget.
Cover all external holes and connectors with duct tape or double tape. They will not allow the product and water to penetrate inside.
Please be patient as some blemishes will be very difficult to remove. This may take not even minutes, but hours of careful processing.

Toothpaste

To remove scratches with this available tool, you can use the following algorithm:

Baking soda

At home, the methods that have been known since childhood are especially remarkable. For example, you can lighten the dishes with ordinary baking soda.

Step by step guide:

Car polishes

To cope with scratches, drugs that are intended for processing road transport also help. For example, car polish will effectively cope with this task.

The utmost care should be exercised when doing this, as these formulations are not intended for mobile displays.

It should be noted that there are also special polishes designed for mobile screens.

Vegetable oil

It must be said right away that the oily structure is not able to get rid of serious defects, but it can significantly improve the appearance of a phone or tablet computer.

The procedure is as follows:

All the methods mentioned above are generally available and allow you to quickly and efficiently remove small scratches from your mobile device.

Attention, only TODAY!