Turning a flash drive into a hard disk. How to make a hard drive from yusby

Settings

I have long wanted to write this article, I think it will be very interesting for you. I received such a question from a friend how to make a hard disk from the flash drive. So, we will disassemble two options: change the flash drive on the 64-bit Windows and on the 86 bit.

If you decide to use programs like Acronis Disk Director or others to see the USB flash drive, then you will not see it there, because there is a so-called Removable Media Bit descriptor (RMB), which is in any flash drive and causes Windows to determine such storage devices As removable, not as a local disk. To correct this case, we just need to delete this descriptor.

Why did I say that there will be two options? Because on systems of different discharge, this operation will be carried out in different ways. It will be easy to do it enough, so I will proceed.

How to make a hard disk flash drive on windows x86?

To do this job, we need to download a special Hitachi MicroDrive driver. You can download from here.

Now we learn the code of the device instance. In this case, we need to go to the Device Manager, proceed to the Disk Device tab. Looking for your USB flash drive and press the right mouse button on it. In the window that opens, go to the "Details" tab, and select the drop-down list "path to the device instance". In the "Value" field allocate the entire string and copy.

Let us turn to the driver. Unpack it to start in any place, and then, using any notepad, open the cfadisk.inf file. Find there the item and in the most recent line, starting with the word USBSTOR, we replace all that we copied in the device manager. That's how it all happens:

At the end of the string, after Rev_Hxx, you need to remove a small tail:

After all the file made.

Now we go to the Device Manager again and open the properties of our flash drive again. We turn to the "Driver" tab and click the "Update" button.

In Windows 7.

Here we need to choose "perform driver search on this computer" and choose just that file CFadisk.inf, which we have changed.

In Windows XP.

In this OS, we select "Installation from the specified place", then "not to perform a search" and "Installing from a disk". Repeat the CFADisk.inf file again as a driver.

After that, your flash drive should be determined by the system as a hard disk.

How to make a flash drive hard disk on windows x64?

So, in this case, we download this archive.

Now go to the Device Manager, open the properties of our flash drive and go to the "Details" tab. There, from the drop-down list you need to choose "EDUCATION IDs". In the "Value" field, you will need to copy all the lines except USBSTOR \\ GENDISK and GENDISK.

F2DX1.INF file, which we downloaded, open up the usual notepad. In general, it is advisable to use NotePad ++. Opening the file, we find a clause in which we remove the first 5 lines, and then simply replace them with what was copied. The main thing is that each line begins with the phrase:% attach_drv% \u003d f2d_install.

In addition, I want to say that the flash drive will be determined by a hard disk on the system in which you have been done this operation, since we just changed the driver in Windows. If you insert a flash drive to another computer, then it will be defined as a flash drive. That's all.

Http://computerinfo.ru/kak-sdelat-fleshku-zhestkim-diskom/http://computerinfo.ru/wp-content/uploads/2016/05/drive.jpghttp://computerinfo.ru/wp-content/ Uploads / 2016/05 / Drive-150x150.jpg2016-05-02T12: 18: 50 + 00: 00Evilsin225WindowSKAK make a hard disk flash drive, make a hard disk flash drive, flash drive as hard dismissively wanted to write this article, I think she will be very interesting . I received such a question from a friend how to make a hard disk from the flash drive. So, we will disassemble two options: change the flash drive on the 64-bit Windows and on the 86 bit. If you decide to use such programs like Acronis Disk Director or others, ... Evilsin225andrey Terechov Computer technology

computerInfo.ru.

How to turn a USB flash drive to a hard disk

Many users could note that any programmer coming to repair the problems associated with the system has an operating system directly on the flash drive. Such a trick is very useful, because, with any problem with a system or hard disk, the user can always restore access to the computer and understand what is the problem with the computer. In this case, not everyone wants to have a system in a computer, much more easier to carry with it a small system disk with additional files. Therefore, anyone should know how to make a hard disk from the flash drive.

But how to turn the flash drive into a hard disk? It would seem that such a process should be difficult and resource-friendly, but in fact everything is carried out quite simple, with the volume and "age" of the flash drive value does not have. The main condition for flash drives is so that it works fine. Also, not only a USB flash drive, but also the SD card, the process of changing properties is identical to this role.

It should be known that multi-inclusiveness should not be applied to such external media, since many operating systems support only the first partition in the disks that are not HDD-species. HDD is the carriers that are installed in the computer. You can remove them, but it is spent a lot of time and effort, so people use cards and external drives to facilitate the entire process of transferring information or operating system directly.

To begin with, it is necessary to make it so that Windows defines a USB flash drive as a non-caliper device. In this case, any Flash card standard has a reverse parameter, then you need to start changes. Some do not think about the safety of their equipment, so they simply modify the flash drive. But this method is dangerous in that many flash drives simply will not be able to change under the selected parameter, which is why they break and they will have to carry in the service center. It is much easier and safer to replace the response from the device to the desired result. This establishes a special driver. A flash drive instead of a hard disk on Windows 7 will also work, as with any other operating system.

First step

Before a flash drive to make a hard disk, the device must be connected to a computer, after which it is possible to determine the type of flash drive.

Open Media Management Manager. You can find it using the "Run" button, "diskmgmt.msc" fits here and "Enter" is pressed. Now it will be possible to see what type has a drive, removable or visible.

Second option

You can also see the type of device by opening the VOLUMES tab in the flash drive properties.

Third option

You can also enter the DiskPart command.

So, now the user knows, is a flash drive with a removable or unable device in this case.

Second Step

If the device is defined as "beam", then it can already be used as a hard disk. Otherwise, before using a USB flash drive instead of a hard disk, its type need to be changed to the "unknown". To do this, use a special filter driver, which with ease will change the incoming information by changing it to the necessary one. One of the most common and simple filters is the Hitachi MicroDrive driver. Thus, the user does not invade the flash drive microclimate, while simply deceiving his system, giving her a false answer.

After the carrier becomes unavailable, the computer will consider it a full-fledged hard disk, which can be divided into sections, each of them will function simultaneously. The main thing in this point is to download a program suitable for bit to your operating system.

Third stage

After the user was able to deceive the computer, you can identify the device code. You can find the code in the Details tab, Device Instance Path.

As a result, it is necessary to copy information, with it further will produce some manipulations in the Hitachi MicroDrive program. When copying, you must remove all the information after the second "\\".

On system 64 bits

Now you need to find the CFadisk file in the Hitachi MicroDrive folder where we find the CFADisk_Device and CFadisk_Device.ntMD64 sections.

In the sections instead of information after "\\" insert the code of our device.

On system 32 bits

The process is similar, only in the file for the 32-bit version you need to find the section "CFADISK_DEVICE".

Here it is necessary to replace "Disk & Ven_ & Prod_usb_disk_2.0 & rev_p" to the device code.

If you want to set your own name for the device, you must replace "Microdrive_Devdesc" to the desired name, let's say "USB_HARD".

Fourth stage

The last step is to replace the drivers. On 64-bit operating systems, before this action, you must disable the driver signature check for the driver so that it is not updated independently due to third-party intervention.

You must open the DRIVERS tab \u003d\u003e "Update Drivers". The following is the folder with the Hitachi MicroDrive driver. This driver is selected, it remains to skip the message about the absence of a digital signature, after which restart the computer, and see the result of the work. The drive became unavailable.

Deleting the driver occurs with the "Update Drivers" button.

That's how it is easy to make a hard disk from the flash drive. This procedure can be held any person if you follow the instructions, while the computer can absolutely impossible to damage, like the drive system. If you use a high-quality volume external drive with good indicators, it does not even occur if it is possible to use a flash drive instead of a hard disk. In this case, it will cope with the task of not worse than rigid disks.

Nastroyvse.ru.

Replaceable USB Drive As Hard Drive in Windows

In this article we will show how to make a USB flash drive or SD card is defined in the system as a regular local hard disk. You probably ask, why do you need it? The fact is that Windows defaults all flash drives and memory cards as interchangeable drives that cannot be broken by Wndows to several sections. And even if the flash drive is broken into two or more partitions using third-party utilities (in the same Linux), only the first of them will be available in the Windows family of the Windows family. Those. Windows supports normal operations with multi-sections for HDD disks, which are defined in the system as local (i.e. non-removable).

Connect to any free USB computer flash drive, then open the disk management manager (diskmgmt.msc) and make sure that its type is defined in the system as Removable.

Also, the type of device can be viewed on the Volumes tab in the disk properties (as we see and here Type: Removable).

Or using the DiskPart command:

List Volume

Filter Driver for Hitachi Microdrive Flashpeckers

To the USB flash drive or SD card recognizes in the system as a hard disk, we will need a special filter driver that allows you to modify the data transmitted through the system stack of the current device driver. We will use the filter driver for USB flash drives from Hitachi (Hitachi MicroDrive driver), which at the OS driver level allows you to change the type of flash drive device from removable on fixed (USB-ZIP -\u003e USB-HDD). Through the use of this driver, you can hide from the system that the connected device is removable. As a result, the system will assume that it works with a conventional hard disk that can be divided into sections that will be available at the same time in the system.

Archives with Hitachi MicroDrive driver:

You need to download the driver version for your system in accordance with its discharge. Both archives have the same structure and consist of two files:

cfadisk.inf - installation file, with driver settings
cFADISK.SYS - Hitachi Driver File

The next step is to identify the device code of our flash drive. To do this, in the disk properties on the Details tab in the Device Instance Path parameter, select and copy (Ctrl + C) the device instance code.

In our example it will be:

USBSTOR \\ Disk & Ven_Linux & PROD_FILE-CD_GADGET & REV_0000 \\ 0123456789ABCDEF & 0

Suppose we plan to install the driver on the 64 bit system. Using any test editor, open the CFADisk.inf file to edit. We are interested in CFadisk_Device and CFadisk_Device.ntaMD64 sections.

% Microdrive_devdesc% \u003d cfadisk_install, IDE \\ Diskts64GCF400 ______________________________ 20101008% microdrive_devdesc% \u003d cfadisk_install, IDE \\ DiskTS64GCF400 ______________________________ 20101008

Change the value diskts64gcf400______________________________________________________20101008 on the code of our device.

We get:

% MicroDrive_DevDesc% \u003d CFadisk_Install, IDE \\ usbstor \\ Disk & Ven_Linux & Prod_File-CD_GADGET & PROD_FILE-CD_GADGET & REV_0000% MICRODRIVE_DEVDESC% \u003d CFADisk_Install, IDE \\ USBSTOR \\ Disk & Ven_Linux & Prod_File-CD_GADGET & REV_0000

Save the file.

If the driver is installed on a 32-bit system, you need to download the advise archive, unpack it and open to edit the CFADisk.inf file. We find a section:

% Microdrive_devdesc% \u003d cfadisk_install, USBSTOR \\ Disk & Ven_LEXAR & Prod_JD_LIGHTNING_II & Rev_1100% Microdrive_devdesc% \u003d cfadisk_install, USBSTOR \\ Disk & Ven_JetFlash & Prod_TS1GJF110 & Rev_0.00% Microdrive_devdesc% \u003d cfadisk_install, USBSTOR \\ DISK & VEN_ & PROD_USB_DISK_2.0 & REV_P

Then change the data in the last line by specifying the copy code of our flash drive, i.e. In our example, we get:

Installing the Hitachi MicroDrive driver instead of the USB drivers

It remains to replace the driver used USB flash drive.

Open the Drivers tab and click the Update DRIVERs button.

We specify the folder to the directory into which the downloaded archive with the Hitachi driver is unpacked:

Select a new driver.

I ignore the warning about the missing digital signature of the driver.

It remains to restart the computer and, opening the disk manager, make sure that our flash drive has become defined as a regular hard drive (type: Basic), and the Hitachi driver is used as the driver.

Opening the conductor, you can also make sure that the flash drive icon has changed it began to be displayed as a rigid disc.

Now with this flash drive, you can work as with the usual HDD: Create partitions, specify the active partition, create dynamic disks, install software that does not work from flash drives, etc.

Important. On other Windows computers without this driver, the second section of the device will not be available.

How to remove the Hitachi MicroDrive driver

To remove the Hitachi MicroDrive driver, open the disk properties and on the Driver tab, click the Update Driver button - the system itself will install the native driver.

winitPro.ru.

How to make a flash drive hard disk

How to make a flash drive hard disk on windows x86

Users who prefer to work with different operating systems know that quite a lot of time goes to "settle" at least two OS on one computer.

If you want to reach OS, you want much more than a couple of-trip, then a simple and banal flash drive can help you.

What does it mean? Simple words, you create an operating system on a USB media and you can work directly without installing it directly to the computer.

It is much easier than to crush the hard disk into many parts and for each of them for a long time and painfully install all sorts of linux, Ubunti and Open Solaris.

That is why there is a popular question "How to make a hard disk flash drive?" In the computer maniac.

It is not so difficult for experienced users, but if you are well oriented in programs, then you will not be difficult to do this process.

Driver to create a hard disk from a flash drive

First of all, you should get on the computer by a special driver, which will greatly facilitate your work. It is called Hitachi MicroDrive. Download here ...

After downloading and installing it, go to the instance code of the device that you have to find out.

To do this, open the Device Manager and locate the Disk Device tab.

Find your USB device and open the context menu.

In the "Details" tab, open the drop-down list and click the "path to the device instance" button.

Pay attention to the "Value" field, where you want to highlight the string completely and copy it.

After the work done already needed the assistance of the driver, with the help of which we make a flash drive hard disk.

If you work with him for the first time, to start unpack it into any folder, then use the notepad and open the CFADisk.inf file.

You will need an item, in the last line, replace the text you previously highlighted, all starting with the word USBSTOR.

At the end of the line, remove the so-called tail, which stands after REV_XXX.

Open the Device Manager and find your USB flash drive there, and in the Driver tab, make it updated.

How to make a flash drive hard drive windows 7

In this case, click "execute the driver search on this computer" and select the file that you previously changed.

Namely cfadisk.inf.

How to make a USB flash drive Windows XP

Here you need to select the "installation from the specified place", then "Do not search" and at the end click on the "Install Disk" button.

The driver will again be the file that has been subjected to change.

Now the flash drive is determined by your system in any way as a hard disk!

However, it should be remembered that the flash drive will be a hard disk exclusively on your computer and exclusively in the operating system in which you worked with it.

This is due to the fact that you only changed the driver in Windows, but not the structure of the USB device as a whole itself.

Therefore, if you need to open a hard disk on another PC or laptop, you will have to repeat the entire procedure again. Otherwise you will have a simple flash drive.

kevin-seoshnik.ru.

How to make a hard disk from a flash drive

When there is not enough free space on the hard disk, and it fails to be released, you have to consider various options for increasing the place to store new files and data. One of the most simple and accessible ways is the use of a Flash drive as a hard disk. The medium-sized flash drives are available in many, so they can be freely used as an additional drive connected to a computer or a USB laptop.

Creating a hard disk from a flash drive

The usual flash drive is perceived by the system as an external portable device. But it can be easily turned into a drive so that Windows will see another connected hard disk. In the future, you can install the operating system (optional Windows, you can choose among more "lungs" options, for example, based on Linux) and make all the same actions that you do with a regular disc.

So, we proceed to the transformation process of the USB Flash in external HDD.

In some cases, after executing all the following actions (for both Windows discharges), you may need to reconnect flash drives. First, perform safely removing the USB drive, and then connect it again so that the OS recognizes it as HDD.

For Windows X64 (64-bit)

For Windows X86 (32-bit)

After that, you can break Flash to the sections, install the operating system on it and boot from it, as well as do other actions as with a conventional hard drive.

Please note that it will work only with the system on which you have completed all of the above actions. This is due to the fact that the driver was replaced responsible for recognizing the connected drive.

If you want to start a flash drive as HDD and on other PCs, then you need to have an edited driver file, and then install it through the "Device Manager" in the same way that it was specified in the article.

We are glad that you could help you solve the problem.

Many users could pay attention to that any programmer coming to repair the problems associated with the system has. Such a trick is very useful, because, with any problem with a system or hard disk, the user can always restore access to the computer and understand what is the problem with the computer. In this case, not everyone wants to have a system in a computer, much more easier to carry with it a small system disk with additional files. Therefore, anyone should know how to make a hard disk from the flash drive.

Before a flash drive to make a hard disk, the device must be connected to a computer, after which it is possible to determine the type of flash drive.

First option

Open Media Management Manager. You can find it using the "Run" button, "diskmgmt.msc" fits here and "Enter" is pressed. Now it will be possible to see what type has a drive, removable or visible.

Second option

You can also see the type of device by opening the VOLUMES tab in the flash drive properties.

Third option

You can also enter the DiskPart command.

So, now the user knows, is a flash drive with a removable or unable device in this case.

Second Step

Third stage

After the user was able to deceive the computer, you can identify the device code. You can find the code in the Details tab, Device Instance Path.

On system 64 bits

Now you need to find the CFadisk file in the Hitachi MicroDrive folder where we find the CFADisk_Device and CFadisk_Device.ntMD64 sections.

In the sections instead of information after "\\" insert the code of our device.

On system 32 bits

The process is similar, only in the file for the 32-bit version you need to find the section "CFADISK_DEVICE".

Here it is necessary to replace "Disk & Ven_ & Prod_usb_disk_2.0 & rev_p" to the device code.

If you want to set your own name for the device, you must replace "Microdrive_Devdesc" to the desired name, let's say "USB_HARD".

Fourth stage

Deleting the driver occurs with the "Update Drivers" button.

Introduction
Most laptop owners are sooner or late face the problem of lack of space on. As a rule, the laptops of the screen dimension up to 15 inches inclusive do not have a free second slot for 2.5 inch device. Therefore, the owners are forced to think either about the replacement of the laptop itself, or the replacement of its hard drive. After replacing the hard drive, there is always an old drive, which can be easily transformed into an external USB drive to carry data.
Naturally, you can purchase a mobile 2.5-inch hard drive and turn it into an external drive. Before the cost of external drives allows. For example, at the time of writing an article for a mobile hard drive of 250 GB, 40 dollars are asked, and for a 500 GB device from WD is asked only 45 dollars.
We are determined with the type of hard drive.
For the sake of fairness, it should be noted that the external drive can also turn the usual desktop 3.5 inch hard drive, - just you can't call it mobile. If you have an unused 2.5 or 3.5-inch hard drive, then first of all it is necessary to determine with the type of its interface.
Today, the following types of interface types are existing on the market: IDE (ATA) and various SATA options. As a rule, all SATA interfaces are inversely compatible with each other, and we will not stop on their variations. The case is completely different between IDE and SATA interfaces that are absolutely not compatible with each other and have different connectors.

Picture Clickable -

In the figure, you are presented two hard drives with various interfaces. Winchesters have a 2.5-inches mobile format. The left is represented by the hard drive with the SATA interface, the hard drive is shown with the IDE with the interface.

Picture Clickable -

In our hands turned out to be 250 GB Winchester from Western Digital Series Scorpio Blue with SATA interface. This drive was used for a long time in the Acer laptop, but its capacity was missing, and it was replaced with a more spacious 500 GB solution.

Picture Clickable -

Despite the long-term use, the work of the Winchester did not cause any complaints, so it was decided to use it as an external mobile drive. To do this, it was necessary to find an external case for him that we did. External Case Agestar for 2.5 inches mobile hard drive.
Computer components stores offer many different external cases for 2.5-inch hard drives. Their key difference is as follows:
- body manufacturing material,
- type of external port (interface),
- cost.

As a rule, there are various Cases with USB 2.0 interface in stores, in a significantly smaller number of cases with an ESATA interface, even less cases with their combination of USB 2.0 & ESATA. Several cases with a modern USB 3.0 interface were found on sale, but their cost exceeded the cost of the Winchesis itself, so they were not considered.

The key difference between USB 2.0 and ESATA interfaces is the data rate. Using the USB 2.0 interface allows maximum compatibility, since the port data is available on all computers. The significant minus of the USB 2.0 interface is a low data transfer rate, which will not allow to reveal the full speed potential of your hard drive.

The ESATA port is more promising, but it is not much common and occurs only in expensive versions of motherboards, buildings and laptops. The ESATA interface allows you to fully reveal the SATA device potential.

Production material may also be the most different. In a simple case, it is plastic. In more expensive variations, an aluminum case with a leather cover included.
The cost of external cases is also returned. The cheapest option will cost the user in 3 dollars, expensive versions will cost more than 100 dollars.

Purchase 100 dollar Case for Winchester, which costs less than $ 40 when it is new and twice cheaper after the start of operation, at least, wastefully. Therefore, for testing, we were granted a case worth with an equal symbolic 3 dollars, - Agestar sub2p1. Complete set and external inspection of Agestar sub2p1.

Picture Clickable -

From the device worth three dollars, we did not expect any miracles as in terms of configuration, as in terms of performance. The device is supplied modestly packed in the package. The front wall of the device covers the cardboard with the enumeration of the key characteristics of the device. This is support for 2.5 inch mobile hard drives or solid-state drives with SATA interface, the presence of USB data transmission interface 2.0 and various color options.
Justice should be noted, our suppliers confirmed that in addition to the black color of this case, they did not meet any other.

Picture Clickable -

After opening the package, we were pleasantly surprised by the fact that there is a manual manual completely in Russian.

Picture Clickable -

Case is fully made of plastic. On the front wall there are paper stickers with an indication of the model, which in any case are stuck, so we recommend that they immediately remove them from the surface of the device.

Picture Clickable -

Case manufacturing material is a soft plastic black color, which does not smell, uniform in all its structure.

Picture Clickable -

The cover of the device is broken into two different sides, which ensures easy removal and installation of the hard drive in the outer case.

Picture Clickable -

The two sides of the outer case are fixed using a plastic latch made of body material. Thanks to the recesses on the covers walls, some glasses with liquid are reliably fixed, or leaving the device in the rain, they will drive themselves to any problems.

Picture Clickable -

The device is intended for SATA hard drives that we have repeatedly emphasized. Inside disintegration controllers with SATA ports for powering and data transfer.

Picture Clickable -

On the side wall, smoked mini USB port for transferring data and power of hard drive. There is no additional port to ensure the power of the drive, which can cause some user problems. With a weak power supply, which undertakes voltage over 5 volts, often encounter problems with the problems of the hard drive. As a rule, connecting the drive directly to the port on the motherboard, and not on the system unit housing, the use of a high-quality cable USB allows you to forget about this problem.

Picture Clickable -

Computer component sellers are often as the advantage of a particular external case talk about the presence of a USB data cable for data transmission or offered to purchase it separately if it is not. We advise our users to not pay attention to it, since the Mini-USB-USB cable is usually available in almost every family and often comes with mobile phones. In our case, we successfully applied the entered data cable from the Nokia mobile phone.

Picture Clickable -

The next stage we have installed the Winchester in Case. It is done simply enough, - by easy pressing. The most important thing is to pre-rotate the Winchester correctly according to the Case Power and SATA data ports located in the case.

Picture Clickable -

The absence of any protruding elements on the Winchester controller scheme allows not to take care of its rear surface when transporting and using the device.

Picture Clickable -

Some users may argue that the plastic case does not provide an adequate heat sink from the hard drive. Naturally, external cases made of aluminum are much more efficient to cope with this task. It should not be forgotten that mobile hard drives do not have such high energy consumption to suffer from overheating and in laptops, as a rule, they are not additionally cooled.

Picture Clickable -

After completing the assembly of the device, the step of its testing and use occurs. The supply of voltage to the device is accompanied by a blue LED with a luminescence, which also symbolize the user about the data transfer process. It should be noted that not all starting work with the created external drive will flow smoothly. If the hard drive has already been used, it was formatted and sections were created on it, - you will not have problems with the start of work. It is decided as the usual flash drive using the Plug & Play method. But for those users who purchased a new hard drive without formatting and with the lack of sections, will be a problem that will be associated with the lack of a drive letter in the My Computer tab.
To do this, you need to create partitions on the Winchester and formatting it. This can be done through various boot discs, but it is better not to bother and do it in the Windows operating system itself.

Picture Clickable -

To do this, you need to go to the "Control Panel" through the Start section, then visit the "Administration" section. In this section, select "Computer Management", where in the "Disk Management" tab you can place and format the only connected external drive. After creating partitions, their formatting you will have access to them through the My Computer tab and you will be exchanged with a drive, as with a conventional hard drive. Test configuration.
The collected external drive was tested both on a desktop computer based on the modern Core i7 processor and an equally modern motherboard and on the Acer Aspire 7730 laptop based on the Core 2 Duo processor. It should be noted that the level of performance on two different systems turned out to be comparable equal.

1. The speed of reading data was tested in the HD TACH 3.0.4.0 program

Picture Clickable -

It is nice to note that the external drive assembled by us shows a much higher level of performance than the external Winchester WD My Passport Essential tested. The maximum data transfer rate was 34.3 MB / s, and the average delay of about 17.9 ms.

2. The read speed in the HD Tune 4.5 program.

Picture Clickable -

In the second synthetic test, we received similar previous data, which also turned out to be somewhat better than the official external Winchester WD My Passport Essential.

3. File recording speed of 64 MB in HD TUNE 4.5.

Picture Clickable -

A somewhat more valuable is typical to practice testing, by recording files of 64 MB. In this test, we received quite expected results, which were also limited only by the features of the USB 2.0 interface.
Separately, it should be noted that throughout the testing the temperature of the Winchester did not exceed 35 degrees Celsius, while a similar hard drive mounted in a laptop had a temperature of about 43 degrees. Therefore, the experience of the working conditions of the Winchester in this case by the users will be superfluous.

4. Download speed of the Windows 7 operating system.

In the course of practical testing by loading speed of the Windows 7 operating system, we received an alcoholic for other external drives with USB 2.0 interface results.

5. Assessment of the drive performance in Windows 7.

We conducted testing the performance of the Windows 7 operating system with the forms of the Windows 7 operating system. To do this, you must call the command: "WinSat Disk -Drive G -Ran -Write -Count 10", where "G" is the letter of the test drive in the system.

From the test results, it is clear that the drive we collected received a much higher rating than the factory decision WD My Passport Essential. Conclusion.
According to the materials of this article, it can be seen that any mobile hard drive can be without unnecessary trouble to turn into a good external drive. Especially for testing, we were asked to provide us with the cheapest external case, worth 3 dollars. Three dollars allow you to get an excellent external drive from the mobile hard drive, at least for data storage. Not to mention the fact that the same external case facilitates the recovery of data with the Winchester of the "Dead" laptops.

Despite the fact that Agestar products many criticize for low quality, for many years of its use I have only a positive impression of it. First of all, it is for the democratic cost. Marriage is found in all manufacturers, let the Agestar, this indicator is somewhat higher than that of thermaltake. But the latter does not have an analogue of the presented external case for three dollars and with a guarantee of 6 months. Products of Agestar We are handing a golden honorary medal for the optimal productivity ratio / price.

Any flash drive can be without problems to turn from Windows to a natural hard disk. That is, for the USB operating system, the flash drive will be perceived as an ordinary, fixed disk, and not as an external portable device. Why can this be needed?

This technique is described first for those who want to prepare a flash drive. The whole problem is that in Windows XP, the diskpart utility does not see the flash drive at all. At least insert a hundred times for diskpart command lIST DISK., it is useless: as a result, only available hard drives will be shown and nothing more.
Consequently, from Windows XP using DiskPart, it is impossible to make a bootable USB flash drive at all.
However, what happiness - this problem can be solved by a tricky way. Namely: we will turn the USB flash drive to a regular fixed disk. In other words, for Windows XP, the flash drive will become another hard disk. And then Diskpart will show the drive you need as nice. Cool? Still would!
Such a transformation of the flash drive is useful to you for other purposes, wherever, instead of a removable hard disk, you will think about using a USB flash drive.
By the way, you wonder what kind of Diskpart does not displays the flash drive at all? It's all about the RMB Descriptor (Removable Media Bit) recorded on each flash drive. It is because of it, Windows XP (and other versions of Windows) perceive a flash drive as a connected device (i.e. Removable Device). It is enough to delete this descriptor and the flash drive is mutated into the hard disk, will be displayed as a disk in the window My computer, all file managers and generally everywhere.
Make such a phint ears will allow us to make a wonderful driver from Hitachi. Therefore, first of all, we need to download it, and then modify.
Download Hitachi driver for usb flash drive
Unpack the driver archive and locate the file. cfadisk.inf.. Let's open it. In the file a lot of things all sorts, but we need one partition, it is called .
And it has the main string with which we do street magic. In the file she looks like this:
Now everything that we need to do is to replace the selected part of the record on the identification data of the flash drive, which we will turn into a hard disk. And then change its name.
How to do it? First, connect the USB flash drive to the USB port. Now open Device Manager (for example, select Start\u003e PerformEnter devmgmt.msc. and press the key).
Expand section Disk devices, Right-click on the flash drive name and select the command. Properties.

Click the tab Intelligence. There will immediately open the menu Device instance code, It is this code that we need. Highlight the code with one click of the left mouse button and press the key combination to save it to the clipboard.

Well, then everything is simple. Open the CFADisk.inf file, we find the section , in it, what starts with % Microdrive_devdesc% and change the specified value after % Microdrive_devdesc% \u003d cfadisk_install on copied earlier.
In other words, you need to change the string allocated below the bold to the one you copied. Then save the cfadisk.inf file.
% Microdrive_devdesc% \u003d cfadisk_install, USBSTOR \\ Disk & Ven_JetFlash & Prod_ts1gjf168 & Rev_0.00 \\ A7B03577C3F1B5 & 0 Now we change the name of the flash drive. At the very end of the file CFadisk.inf find a string Microdrive_devdesc \u003d In chapter And change the value in brackets on any other. Initially, there is a value "USBTOFIX", you can leave it.

The most important thing remains: install the updated CFADisk.inf driver for our USB flash drive. To do this, click on the name of the flash drive in the window Device Manager And select Team Refresh Driver.

Window opens Wizard update equipment. Now step by step.

In the first window, select Switch No, not this time and click on the button Further.
Select Switch Installation from the specified locationClick on the button Further.
Select Switch Do not search. I myself choose the driver's desired driver and click on the button Further.

Click on the button Install from disk.
In the window Installation from disk Click on the button Overview and select the driver folder where the file is cfadisk.inf..
Windows will write up if you really want to install the driver, click on the button Continue installation And then on the button Ready.

Now the case is done and the flash drive has turned into a hard disk, cheers. Disconnect it, connect again and format. And now see: instead of a portable device icon, the flash drive will be displayed as a hard disk.

Well, that's all, the flash drive has successfully turned into a hard disk, and now it will become available for the DiskPart utility, and maybe you will find it and other use.

You purchased a new, fast solid-state drive (SSD), and the old lies without a case? Put it with a new task and use as an external data storage. To do this, you will need only a housing with a SATA controller; It is available for both 2.5-inch and 3.5-inch models. For the latter, the power supply is required, the compact storage facilities have enough power supply via USB port.

Work intensity: average, costs: 600 rubles.

Mini nas on the router

Is it necessary to access the same data in the entire home network? To do this, you will not need expensive and bulky network storage (NAS) - this task can perform a USB drive if it is connected to your router. Newer devices are equipped with an appropriate port.

You must first format the USB drive from under Windows in the NTFS file system and then simply connect it to the router. In this case, the latter must have a USB port and it must maintain the appropriate functionality. Now, typing in the address bar of the browser address 192.168.1.1 (or similar), you will be taken to the router's user interface.

Click the "USB Settings | Sharing data storage device "(for TP-LINK routers, for other devices, the name of the menu items may differ) and make sure the disk started.

To access data in the home network, it will be enough in Windows Explorer to dial the address of the form "\\\\ 192.168.1.1 \\ Volume1". A permanent connection is achieved by right-clicking on the folder to which it is planned to be allowed access, and the "Connect a network drive" item.

Work intensity: small, costs: no

Flip instead of password

For a USB flash drive of a small volume, there is also practical application. For example, when entering Windows, you can unlock the computer without entering the password. To do this, you need the ROHOS Logon Key tool (1450 rubles), Predator (650 rubles) or free USBLOGON (http://www.rohos.ru/products/rohos-logon-free/).

After installation, you need to select the connected USBPC and configure security settings. After entering the Windows password, the flash drive is ready to work. Unfortunately, work with USBLOGON complicates the German-speaking interface, but even without the knowledge of German with it easy to figure it out.

Work intensity: average, costs: no

Flash drive for emergency cases

If the computer no longer works as it should, a boot USB flash drive comes to the rescue. The SARDU tool (http://www.sarducd.it/) sets up to 20 different antivirus programs to the drive, and in addition, provides various versions of Linux and other software for the provision of "first aid".

> Preparation: In the left side panel, the selected software is listed by category. Mark the necessary programs by checkmarks. We recommend choosing several antiviruses and Linux version (for example, Ubuntu).

> Creating a flash drive: On the right sidebar, click on the symbol with a USB drive. You can start creating a boot flash drive.

> Application in an emergency: To use the boot flash drive in the case of a "Alarm", you need to change the sequence of boot from the drives in the BIOS SETUP.

At the same time, set the priority of the USB boot priority with respect to the HDD. Then select the desired program from the list. Do not forget to cancel changes to the BIOS after repairing the computer.

Photo: Manufacturers, Racum / Flickr.com