Configure Internet Rostelecom on a Windows computer
Rostelecom is one of the most popular Internet service providers and has the greatest number of subscribers. If you are his user or just going to connect, it is useful to know how to establish a network yourself. This can be useful in various situations - for example, after reinstalling Windows or when purchasing a new router. Moreover, supporting Rostelecom is known for its slowness. In addition, for the call of the wizard you need to pay extra money. Consider today the question of how to configure the Internet Rostelecom on Windows with a direct connection and using a Wi-Fi-router.
Configure Internet Rostelecom can be in several ways.
Direct connection
If you use the only computer and do not plan to use the stationary Internet on the tablet, the router does not need to purchase. Enough just connect the wire to the network card. In Moscow and other regions of Russia, the Internet comes through the fiber optic cable to the house, with further eyeliner twisted pair to the apartment. It is not required to buy any modem or adapter. In addition, you can connect cable television service at the same time.
If the network card driver is installed, and it works fine, then in the Windows system tray, the red cross must change to the yellow exclamation mark. This denotes that the Rostelecom server is available and only to make settings. The Internet is available one of two types of connection: Static IP or PPPoE.
Static IP.
In this case, the provider allocates you a permanent IP address, you are its sole owner. It is very convenient to use various online services, where you need to remember the user and save the site settings.
- Three windows right-click on the yellow exclamation mark, select "Network and Shared Access Center".
- On the left side, select "Changing the Adapter Settings" - "Ethernet" - the right mouse button - "Properties" - "Internet version 4" - "Properties" - "Use the following IP address and DNS server".
- Add data to the fields that are fixed in the contract for the provision of Rostelecom services.
After a couple of seconds, the yellow icon will disappear, and you can use the Internet.
PPPoe
According to this standard, you do not need to enter a bunch of numbers with addresses, but is enough to add login and password specified in the contract. The process of the new connection is slightly different from the previous one.
- Right-click on the yellow exclamation mark - "Network and Common Access Center" - "Creating and Setup or Network" - "Internet connection is high-speed (with PPPoE).
- Add a username and password from the contract, come up with the original name.
When you turn on the computer, the connection will be installed automatically.
Through router
Adjusting the router is no harder. Connect the device to the power grid, the internet cable to the corresponding connector (it is always different in color). For the primary installation you need to get into the device's web interface.
When using Wi-Fi, connect to the new network, it is unprotected and does not request a password. In any Windows browser, dial the IP address, login and password. They are recorded in the manual or on the back or bottom cover of the router (for details, see the article IP address of the router). When you first start the system, the system will propose to go through the quick setting procedure. You can choose a region and city, as well as provider - Rostelecom. Parameters will be able to automatically, you will be used to imprint the data from the contract.
If this is not in the settings, select the "Static Address" or "PPPOE" connection type, add the necessary parameters. Then click "Save"; In some cases, the system will propose to restart the router. Do not forget to set the protection method and password. Now you can connect various devices to the network, even such unusual as TV or an interactive television prefix.
Conclusion
Even if you are an inexperienced user, the entire setting process will take no more than 5 minutes. As you can see, it is quite simple. If the service for various reasons does not work, then you should contact technical support.
