How to set up online Rostelecom on a computer with Windows 7/10

Settings

Rostelecom is the largest service provider with the Internet in the Russian Federation serving the largest number of subscribers in the country. Using the services of this provider or by planning a connection to it, it will not be unnecessary to be able to configure the connection. This will help if the time has come to change the router to a more functional or in case of reinstalling the OS. Of course, you can invite a specialist, but it will require additional financial costs, and it will have to wait for it. While setting up the Internet in the Rostelecom network, made personally, will be executed immediately and for free.

Configuring the Internet from Rostelecom depends on the technology and equipment that was used to connect the subscriber. Users living in large cities are available on a dedicated line or through fiber optic cable. The modem in this case is not needed and most likely you have to configure the router. For residents of less civilized areas, the service can be provided through a telephone cable, which requires configuration of an ADSL modem.

This section of the manual can be read with the Instructions for Connection Setting for both types of devices.

Through router

Within the framework of this article, the sequence of actions necessary in order to connect Internet Rostelecom on a specific model of the router will not be considered. The following are general recommendations that can be applied for almost any modern router:

To connect the Internet Rostelecom, you first need to connect the computer and the router with a network cable that comes with the equipment. On the router, we insert the wire into one of the LAN ports on the PC to the network connector.
We turn on both devices in the electrical network and run them.
To enter the router control panel from a computer, in the network parameters on the PC, the automatic receipt of the IP address and DNS servers addresses must be installed. You can check these options by going to the Protocol Properties page 4. To do this, you need to do this in the Network Management Center and access to the menu item changes in the adapter parameters. Then in the window that opens, select Connection through your network card, click on it right mouse button, select Properties. In the next window, make a double click on the version 4 protocol.
We launch any Internet browser and in its address bar We write 192.168.1.1. The exact address of the router can be found on its bottom panel or in the instruction manual.
In the window that opens, enter the data for authorization of the user (usually the username and password Admin), the exact values \u200b\u200bof which are also shown on the label from the bottom or in the user manual.
After successful authorization, the device status page opens on it to find the WAN section.

Further setting depends on the standard for which the provider provides Internet access. To connect most subscribers, the PPPoE standard is used, which is configured as follows:

On the WAN configuration page, on the field in which you want to specify the connection type, select PPPoE.
In the following fields, we specify the name of the connection (usually any Latin).
Login and password in the network of the operator (provided by the provider, do not be confused with authorization data in the Personal Account).

After confirming the changes made, the router will be rebooted and if the data is entered correctly, the Internet connection will appear.

Rostelecom provides its subscribers branded equipment, together with which a disk with a program for configuring a router is supplied. This software allows you to configure the router automatically with the minimum user participation.

Via ADSL modem

Subscribers who are not available communication on Ethernet technology, Rostelecom, provides services via a telephone network cable. To connect a computer to the Internet via telephone communications, you need to use a special conversion device - ADSL modem. Consider it further.

You can connect the modem Rostelecom to the computer as well as the router - through the LAN cable.
After turning on to the power grid of both devices, we go into the control panel of the modem with a PC, typing in the browser in the address bar 192.168.1.1 (the exact address will be found in the user manual).
In the opened admin panel, enter authorization data (usually admin / admin, or see the manual).
Select the connection parameters, specify the PPPoE type, prescribe the username and password of the user, which should be in the copy of the contract.
Next, you need to specify VPI and VCI values, which differ depending on the subscriber's stay region. These data will find out in technical support.
If everything is entered correctly, it remains to restart the modem and wait for the connection.

There is another configuration method - start the application from the disk provided by the provider.

Attention! Connect the home Internet Rostelecom directly to the computer, without using the router or modem.

How to connect to the Internet Rostelecom on a computer

When connecting the Internet through the router in most cases, nothing to customize in the computer's operating system is unnecessary. Just connect the Ethernet cable one of the LAN ports of the router with a PC network card. If the connection is carried out without a router, then you may need to specify some parameters.

As a rule, configuring the Rostelecom connection occurs through the equipment setup wizard. Following the wizard prompts, you need to specify authorization data in the Rostelecom network for connecting to the PPPoE standard. If all data is true, the Internet Rostelecom connection will be set after confirming the changes.

Consider the procedure for installing parameters for different operating systems.

How to set up the Internet from Rostelecom in Western Windows 10

To configure the Internet from Rostelecom, you need to perform the following actions:

Now the output to the network will be possible after the startup of the connection is done manually. On Windows 10, this process can be somewhat automated, the label setting. First you need to create it, selecting the Create Label in the context menu in the context menu. After that, place this shortcut in the OS autoload or activate the appropriate option in the label properties.

How to set up online Rostelecom on a computer running Windows 7

The Internet Rostelecom Connection Parameters for computers running Windows 7 are no different from those described above for the tenth version of this operating system. In addition, network configuration will be the same for all versions of the older seven. There are minor differences in the Windows XP interface, in which it is not difficult to understand independently, focusing on the recommendations given by this manual.