Removing the password when entering Windows 7 is quite simple. This will require a minimum amount of time as well as knowledge. This kind of operation usually takes no more than a couple of minutes.

It can be done different ways: via a special console, command line or by dumping key data from SAM. Each method has its own advantages and disadvantages.

Why set a password

It often happens that some important and confidential data is stored on a PC, access to which should be limited. Microsoft Windows makes it easy to restrict the circle of persons who have access to files on the computer by installing a special key. It can be its own for each person, if there are several users.

Also, an access code is required to protect information on a PC to different owners from each other. For example, it is not uncommon for parents to need this, so that curious children cannot familiarize themselves with some information they do not rely on.

Remove the password through the "Run" console

One of the easiest way to disable the entry of an access key on the OS is using the "Run" item. Accessing it is quite simple - just click on the "Start" button. Most often, the item in question is present on the right side of the window that opens.

Command entry

To disable the function in question, you must enter a specific command. It will open a special applet to do this.

The process of entering the command itself is as follows:

• open the menu of the "Start" button;
• click on the "Run" item;
• in the field that opens, write "control userpassword2".

After completing these operations, a window called "User Accounts" will open.

It contains two tabs:

• "Users";
• "Additionally".

It is necessary to stop your attention on the first tab. Since it is in it that all account settings are carried out, including changing the login, access key and other attributes. Plus, you can easily add new accounts or delete old ones if you want.

Disable password

To disable Password, just open the corresponding window ("accounts" -\u003e "users"). In it, you must uncheck the box titled "Require username and ...". In this simple way, you can disable the need to enter a Password.

We confirm the user

You can also completely disable the Microsoft Windows login window.

To do this, you need to do the following:

• in the window called "Accounts", double-click on the desired line (admin, user or something else);
• click "OK".

A window containing three fields will open. Only the top should be filled in, login is written there. The rest are left blank. After that, click on "OK" again. After completing these operations, when you start Microsoft Windows, you will not need to enter Password. Which is quite convenient if only one person has physical access to the PC.

video: Password reset

Remove password when Windows starts without programs

Also, Password in the operating system under consideration can be unstuck without using the "Run" item, as well as various kinds of third-party applications. To do this, just use a special command line. This way you can avoid the need to enter the Password when turning on the computer, as well as when it wakes up from sleep mode.

Command line configuration

In order to configure the command line, you must use the disk with the Windows distribution kit. This method of setting and resetting the access code is suitable if it is forgotten, and otherwise it is not possible to start the OS.

First of all, you need to install through Bios boot from a CD or other device containing the distribution kit. After that, you should reboot and start the installation.

After that, the following actions are performed:

1. CmdLine - enter cmd.exe;
2. SetupType - replace parameter 0 with 2;

• select section 999 and click "Unload bush";
• extract the distribution and reboot the PC.

Reset password and login

After loading the operating system, the user will immediately see a command prompt window. To reset the password, enter the following command: net user username

If, for some reason, User has forgotten the name of the account, then you can simply write net user without parameters. This will display all available titles and select the required one.

If the new Password is not supposed to be used, then it is sufficient to leave the field blank.

If you need to enter a new one, the command will look like this: drive name: Windowssystem32net user username new-key.

It is also often required to create a new account without an access key.

To do this, you must execute the following commands in strict order:

These commands perform operations in strict order:

1. creating a new User;
2. adding it to the Administrator working group;
3. removal from the Users group.

The considered reset method is rather complicated, but quite feasible even for not very experienced PC owners.

Method for resetting key data from SAM file

There are many different ways to reset your login code. But all of them just change the information stored in a special file called SAM in various ways. It is he who is used by the OS to place data concerning both User and Password in it. This abbreviation name stands for Security Account Manager.

The file in question does not have an extension, since it simply does not need it. It is a direct part of the registry, located in the directory systemrootsystem32config... Also, a copy of the file in question is available on the rescue disk, if this function for some reason was not disabled earlier.

Editing this file to change the operating system login parameters is the most difficult path. To work with SAM, you need specialized software from third-party developers. All SAM operations must be performed with the utmost care and accuracy.

How it works

The most popular application for changing data in a SAM file is the active password changer. Before starting work, you need to copy the application to some medium or another FAT32 hard drive.

After performing this operation, you must:

1. run the file from the password folder "BootableDiskCreator";
2. in the window that opens, select "Add USB ...";
3. activate the button "Start".

After completing all the above steps, a bootable USB drive will be created.

The process of changing data using the application in question looks like this:

This way of working with accounts and their attributes is as secure as possible. Since it avoids editing the registry and other manual operations. This is sometimes difficult for not very experienced users who started working with their PC relatively recently. The probability of harming the operating system in this case is practically zero.

Another important advantage of this program is the ability to set a schedule for using a PC by separate accounts.

The disadvantages include the fact that some outdated motherboard models do not support starting from USB media. In such a situation, you have to look for some alternative options: floppy disk, CD or something else.

Quite often, especially with beginners, situations arise when the combination of characters required to enter the OS is forgotten or lost for other reasons. There are many ways out of such a difficult situation; system reinstallation is not always required. Moreover, any computer owner who has minimal skills in interacting with equipment of this type can cope with resetting the OS access code.

How to reset password in Windows 7 if it was lost. Reset password for 7 32 and 7 64 bit.

We will reset the password either from a flash drive or from a disk
First, we need to have either a bootable disk with ERD Commander, or a bootable USB flash drive with ERD Commander, since it is with the help of ERD Commander that we will reset password in Windows 7!
According to the manual, I will do it from the ERD Commander bootable USB flash drive (there is practically no difference if you did it from the ERD Commander bootable disk)
First, select your Windows 7 bit from the list. If you don't know what bit Windows you have, then choose at random. If you chose the wrong one, then an error will pop up and after rebooting, just select another option

After a few minutes, select your operating system from the list (most likely it is one), press ok a couple of times and Next

ATTENTION! If an error pops up, restart your computer and select another ERD Commander for 7, since you selected the wrong one DISCHARGE! If you clicked Next and the window popped up like in the picture below, then you did everything right. Select Microsoft Diagnostics ...
On the screen you will see a window in which you should select the utility, which is exactly responsible for resetting the Windows 7 password -\u003e Change Wizard passwords (or Locksmith)


After that, a window will appear in which you need to select the NECESSARY USER from the list and write a NEW PASSWORD for him.

After that, take out the flash drives and load Windows. Log in with a new password, which, by the way, first change immediately to another!
That's the whole procedure! If you want to remove the password altogether, go to Start -\u003e start typing Accounting -\u003e select User accounts -> Remove password -\u003e Enter your old password and click Remove password

You can also check out other articles on the topic "Troubleshooting"

To reset the administrator password in windows 7 without being able to log into the OS through the “Guest” or simple “User” account, you need to: have a working boot (installation) disk or USB-flash drive with you, follow the instructions below.

Password reset via bootable CD or USB stick

Resetting your password while logging into windows

It should be noted that if you have the ability to log into windows using the "Guest" or "User" account, then you can reset the password of any user on a computer with administrator rights in this way.

Loading ... Published: 17.03.2016

How to reset windows 7 password without programs

dontfear.ru

How to reset a forgotten password in windows 7

If you cannot log in to windows 7 due to the fact that you forgot or lost your account password, then this article will help you. It contains all the effective ways to delete, reset or replace the password of any account (even the administrator) in the "seven" and gives recommendations on how to protect yourself in case the password is lost in the future. All the described methods of unlocking a user account are absolutely safe if you follow the instructions and do everything carefully.

How to reset a forgotten password using Ophcrack

Ophcrack is a unique utility that allows you to restore access to any account in windows 7 in just a few minutes. Moreover, it works in any edition of the OS, starting with XP, and can function from a bootable USB flash drive. The mechanism of the program is somewhat different from the password guessing algorithms for similar applications and includes several components:

• lM-hash algorithm - passwords in windows 7 are stored in this format, the number of characters of which does not exceed 15 pieces;
• rainbow tables - a mechanism designed to recover encrypted passwords through the use of hashes with a complex reverse decryption process.

The program can also unlock complex passwords by extracting them from registry files and then decrypting them using completely new data processing methods, due to which the load on hardware resources is small, and the speed of guessing increases by orders of magnitude.

Using a bootable flash drive with Ophcrack

The algorithm below is relevant for computers that cannot be accessed for the following reasons:

• the password for one account has been lost, but there are no other accounts;
• no user profiles on this computer can be accessed.

If you are faced with a similar case, you will have to follow the instructions, which boil down to the following: create a bootable USB drive based on a special version of Ophcrack and boot from this media to restore access to your account. In more detail, this instruction looks like this:

For inexperienced users it is recommended to select the first (graphic) mode of OphCrack operation: Ophcrack Graphic mode. But it should be borne in mind that in the graphical mode the program may not start, and the text mode works flawlessly, although it requires certain skills in handling console programs.

If we consider working in a program with an interface in more detail in the next section, then we will dwell on using its console version in more detail. Although the only feature here is the absence of windows and buttons. After starting the console version of the utility, it will automatically determine passwords for all accounts and display them in the "Results" section.

Remove password from windows

What if I forgot the password for the administrator account? Ophcrack will also help here, but if you have a network connection to download it. Consider the sequence of actions:

After a few seconds or minutes, depending on the complexity of the combination of characters in the password, it will be displayed in the "NT Pwd" field.

We use system recovery tools

What if you don't have access to the Internet and another computer, but you need to log into your account? A bootable USB drive or a disk containing the distribution of the windows 7 operating system used on the computer will help to solve the problem.

In this case, resetting the windows 7 administrator password is as follows.

Thus, forgotten password It is easy to restore as many times as you like, but using the proposed method on other people's computers will not work due to the fact that changing the password is required when gaining access to any of the accounts.

Create a flash drive for instant password reset for a specific account

If you do not want to repeat the situation with a forgotten password, it is better to make a diskette to reset it. By a floppy we mean a USB flash drive, because the use of floppy disks and disks in recent years is not relevant.

As a result, the wizard will generate a boot disk required to unlock the account, the password for which was lost.

Now, if for some reason you cannot enter windows 7, click the Reset password button, insert the created disk or USB flash drive and follow the instructions. which boil down to clicking Next.

After reinstalling the system, changing the password, or creating a new account, the password reset disk will have to be recreated.

Knowing how to reset the windows 7 administrator password and having a USB flash drive with a key file, a forgotten password will no longer be a problem.

Related Videos

Good publicity:

UstanovkaOS.ru

Reset forgotten windows 7 password without reinstalling

We need to download one of the assemblies of the utility for resetting the password and editing the windows registry in offline mode presented below (without loading the operating system itself).

How to create a bootable CD. The process is very simple. We unpack the required archive with the program, we get the ISO image. We insert a blank CD-R into the drive and write the image to a disc (in the program for burning, select an item, like "Burn a disc from an image"). As a result, you should see several files on the recorded disc, and not one with the extension .iso

How to create a bootable flash drive. The process is a little more complicated. First, unpack the archive into the root partition of the flash drive. Not a problem if other files and folders are already there. Now let's turn the flash into a bootable one. open the command line (Win + R - cmd), write the command: F: syslinux.exe –ma F (instead of "F" - the letter of the partition with your USB flash drive). Press "Enter". If no error messages appear, then everything went well.

At the next stage, we boot the computer from the created bootable CD or USB device (For myself, I just press the F8 key after going through the POST BIOS, a window appears with the choice of bootable media. You may have it differently. It all depends on the manufacturer and model of the motherboard) ... In the downloaded utility, select the partition with installed windows (system) and the path to the system folder, follow the further instructions of the program. All standard steps are shown in [square brackets]. In most cases, you just need to press the "Enter" key to perform the default actions.

Standard items that need to be selected at all stages of the utility operation:

• System registry path: C: \\ windows \\ System32 \\ config
• Password reset
• Edit User Data and Passwords
• Enter the username for which we reset the password
• Clear (Blank) User Password
• Next, we enter an exclamation mark (!)
• Then press the Y key

To be able to make changes, you need to correctly shut down windows. After resetting your password, you will no longer have access to encrypted data (EFS), if you created such (the only way to recover it is to remember the password). I do not recommend changing the password with this utility. Sometimes it doesn't work. But erasing the password (Blanking) should help in any case.

Second way.

Requires a windows installation disc. Works only with windows 7 and Vista OS. I just "forgot" my password on purpose and changed it using this method. Everything works just fine. Here are the images - tips for the first four steps (the quality is terrible, I'll make my own later):

• Step 01. Boot the computer from the installation disk. After copying the files, we will be prompted to select the language options. Leave everything as it is and click Next
• Step 02. In a new window, instead of the "Install" button, click on the System Restore item in the lower left corner, after which windows will search for installed systems to restore
• Step 03. A window with the text "Problems found in boot parameters ..." may appear. We burn (Press the No button). In the new window, select our system and click Next
• Step 04. A window will appear with a list of various system components and options for recovery. We don't need them. We look at the very bottom and click on the Command line item
• Step 05. In the command line, enter the text (make a backup copy of the Sticky Keys utility): copy c: \\ windows \\ system32 \\ sethc.exe c: \\ and press Enter
• Step 06. We write further (instead of the sticking utility, insert the command line):

  copy c: \\ windows \\ system32 \\ cmd.exe c: \\ windows \\ system32 \\ sethc.exe press Enter, Y and Enter again

• Step 07. We have replaced the required utility. Close the command line window and press the Restart button in the background window (Now we boot from the hard drive, as usual)
• Step 08. After the login window appears with a choice of user and password, press the Shift key 5 times. A command prompt window should appear (which is what we wanted)
• Step 09. In the command line, enter the following command, substituting the required data: net user User NewPassword and press Enter
• Step 10. Close the command prompt window and in the background window, in the lower right corner, select the Restart item. Password changed. Now let's put the files back in their places ...
• Step 11. Follow steps 01 - 04, instead of the fifth step, enter the text:

  copy c: \\ sethc.exe c: \\ windows \\ system32 \\ sethc.exe press Enter, then Y key and Enter again

• Step 12. We perform the actions exactly as in step 07 ... Then we enter a new password and are happy :-)

Note: If the username consists of two words - at step 09 it must be entered in quotation marks, for example: "Username"

I know of another method, similar to the second one, only which implies working with the windows 7 system registry. It is the most complicated, so it was decided not to describe it in this article (especially since it also requires a system installation disk)

rapidsoft.org

How to recover windows password without installation disc

If you do not remember the windows password, or you urgently need to go to another computer, but there is a password and there is no way to find it out - we read the article, and using a flash drive (disk) and the program, we reset the password.

Also, the previously written instructions can help you: "How to reset an account password in windows 10" - using this instruction, you can reset or change your password without third-party software (it is also described how to restore access if you are logged in with a Microsoft account ); Resetting the password using the windows installation disc - if you have a system installation disc, you can use this method; How to reset the password in windows - I wrote this instruction when it was necessary to reset the password in XP and the utility described in this article did not help, I tried it on XP, 7 and 10, removes the password for local accounts and if the instructions below do not help you - try this ...

Creating a bootable disk or flash drive:

To create a bootable flash drive (disk), we need another computer, the flash drive itself and the Offline NT Password & Registry Editor program.

Open the Offline NT Password & Registry Editor website and select Bootdisk

go down, find the files to download, and for the disk and for the flash drive, download the archive with the name at the beginning of cd

unpack the archive, inside the image that you want to write to a USB flash drive.

The archive is unpacked on each computer in different ways, depending on which archiver is installed on your system. For example, we opened the downloaded archive (clicked on it in the browser with the left mouse button).

There is one file inside, select it and click "Extract all files" above.

Click Browse to select where to unzip the file.

Select "Desktop" or any other folder in which it will not be difficult to find this file later, and click "OK".

In the next window, click "Extract".

Now the extracted image needs to be written to a disk or USB flash drive. To do this, we will use the free utility Rufus, with its help you can write an image to a disk, USB flash drive or sd card. Download the program \u003d\u003e connect a USB flash drive (or insert a disc for recording) \u003d\u003e run Rufus (you do not need to install it when it boots, just open it from the downloads by double-clicking the left mouse button) \u003d\u003e click where the disc with the drive is drawn and select image for recording.

That is, when you clicked on the button with the painted disk, a window will appear in front of you where you need to find the unpacked image. In the example we unpacked it to the desktop, in the window that opens, select the desired image on the desktop and click "Open". Then, in the Rufus program, you need to click "Start". You will be warned that all data from the flash drive will be erased (if you have something you need there, you can still cancel everything and save the data).

When the blue line reaches the end and writes "Finish" - click on "Close" \u003d\u003e pull out the USB flash drive (disk) and connect it to the computer on which you want to reset the password.

Reset windows password:

If you already have a bootable USB flash drive (disk) on hand, insert it into the computer and do everything as in the instructions:

1. Turn off the computer and, when turned on, select the boot from a USB flash drive (disk). On my laptop, to select boot from USB, when you turn on the computer, press the Esc key \u003d\u003e in the window that appears, select the USB flash drive and press Enter. The boot menu on each computer is called differently, therefore, at the beginning of this paragraph, the words highlighted in red refer to an article with a list of keyboard shortcuts for each device, find your device in the list and select boot from a flash drive or disk.

2. If the download method is correct, the software will download and you will be prompted to select a section for password reset (you will see those available in the description). If under the inscription Possible windows installations found opposite the section with windows is 1 - just press Enter. If there is another number, press this number on the keyboard and Enter.

Note 2017: recently a friend forgot her password, she has a very old computer and for some reason this utility did not load, I had to reset the password using windows PE, the procedure is simple and is described in the instructions How to reset the password in windows.

3. Perhaps you will be asked for the path to your registry, or maybe not, if you see it like in the picture, just press Enter, and if not, go to the next item;

4. At this stage, you need to choose that you want to use the program to reset your password. By default, 1 Password reset is selected - just press Enter (the second option suggests using the recovery console);

5. By default, 1 Edit user data and passwords is selected, you do not need to change anything, press Enter.

6. A list of all users of this operating system will appear in front of you, so you need to decide who you want to reset and enter it. If the user is written in Russian, then the program will put a full stop instead of each letter, and instead of the username from the RID column, you need to write numbers and letters that stand along the line of the desired user. For example, the name of the user for whom I want to reset the password is "I" and it is displayed in the list as one dot \u003d\u003e numbers in front of it in the RID column 03e8 \u003d\u003e write 03e8 from the keyboard and press Enter. Also, the top-most user is the built-in administrator account, at the moment it is disabled, but you can enable it and already logging in as an administrator, change any user password to the desired one (to enable it, enter the numbers from the RID column that are in front of it and press Enter ).

7. By default, 1 item is selected Clear user password and if you just press Enter - then the password for the selected account will be reset. If you want to reset the password, press Enter. If you want to enable the disabled administrator account and you selected it in the previous paragraph, press the 2 key and Enter on the keyboard (that is, select Unlock and enable user account and press Enter).

8. Now you need to exit this menu, press q and the Enter key

9. Enter y and press Enter to save

When Edit Complete writes, you can safely restart your computer and log in without a password, or if you have enabled the built-in administrator account, log in under it and make changes for any user through the control panel. That's all for today, if you know other ways to reset your password or you have any add-ons - write comments! Good luck 🙂

Read also:

How to turn a PC into a Wi-Fi hotspot;

LastPass Password Manager Guide

How to install two (or more) versions of windows

vynesimozg.com

How to reset windows 7/8/10 administrator password?

When it comes to resetting the windows user password, it means that the forgotten password will be deleted or replaced with a new one, which will allow you to resume access to the account. Guessing (or, in technical terms, "brute-force") the windows password is a much more complicated operation. It is carried out using programs such as Ophcrack, LCP, SAMInside, etc., while it is far from always possible to guess the old password, but only if the password is short enough or it is present in the so-called "rainbow tables". In addition, even in these cases, a very powerful computer and a lot of time can be required. Sometimes brute-force attacks are the only way to regain access to files encrypted with the built-in Windows EFS file system.

This article will focus exclusively on the operation of resetting (deleting or replacing) the windows password. The methods described below are most commonly used to reset the administrator password, but they are also applicable for normal users.

Warning for Windows built-in file encryption (EFS) users. If encrypted files are associated with the account into which you will make changes in the ways described below (and there is no backup copy of the encryption certificate), then access to these files will be lost, even if you later remember the password for the account.

Method 1. Replacing Utilman.exe with cmd.exe to run the net user command

This method seemed to me quite simple and also a little funny. Utilman.exe is a windows utility that launches accessibility features on the lock screen (narrator, on-screen keyboard, magnifier, and so on). Called by Utilman.exe with a small button at the bottom left. If we trick windows by making small changes to the system files and replacing Utilman.exe with the command line program cmd.exe, then we can launch a command window right on the lock screen! And then we enter there a simple command net user User Password, which will reset the password of the desired user.

It doesn't really matter how you make this replacement, but you will most likely need one of the following:

• any installation DVD or USB stick with Microsoft windows 7, 8, 10 (no matter what system you have);
• any bootable disk with windows PE or windows Live CD / DVD / USB;
• any boot disk with any OS that supports the NTFS file system, for example, the miniature SliTaz Linux.

I will show you how to replace Utilman.exe using the windows 7 installation disk. For 8 or 10, the steps are exactly the same with a slight difference.

Now you can log into your account with the specified password.

After completing the above steps, replace Utilman.exe. To do this, you need to boot back from the installation disk and go to the command line (to step 5), then run the command:

move D: \\ Utilman.exe D: \\ windows \\ System32 \\ Utilman.exe

and confirm the replacement. (However, you can return Utilman.exe from windows itself, but you need to change the owner and access rights on the Security tab, so it's better to boot from the installation disk a second time).

What if I don't have a windows installation disc?

If you do not have an installation disc, you can download its image from the Internet and burn it to a disc or flash drive. It is worth noting that you can burn a DVD disc under a user account with normal rights using the InfraRecorder Portable program (that is, if a non-administrator account is open on the computer, there is no need to use another computer). To write an image to a USB flash drive, you must have administrator rights, that is, another computer. Recording can be done using windows 7 USB DVD Download Tool, Rufus or UltraISO.

In addition, the operations described above can be performed using another operating system loaded in Live CD / DVD / USB mode. One such system is SliTaz Linux, which image is less than 40 MB. To do this, write the image to a USB flash drive using the Rufus program (or to a disk using any disc burning program), and boot from the media. Select the system, language and keyboard layout, and a graphical shell will appear in front of you. For simplicity, you can launch PCMan File Manager (Applications), which looks very similar to Windows Explorer. Your discs will be displayed on the left. Find your system drive, go to windows \\ System32, move Utilman.exe to a safe location (for example, the root of the drive), make a copy of cmd.exe in the same directory, and rename this copy to Utilman.exe. Boot your operating system and follow the steps in points 8 and 9. Do not forget to revert the changes.

Method 2. Using Offline NT Password and Registry editor

In the previous method, the administrator password was reset using the net user console command, without the participation of third-party programs. In other words, windows itself made changes to the SAM file, so I think the first method is preferable to the others. However, there are programs that allow you to reset your password by making the necessary changes to the SAM file directly. One of these programs is the Offline NT Password and Registry editor. This program is based on Linux and is completely free. The program does not have a graphical interface (for this and other reasons, I recommend using it for experienced users, and for beginners I advise you to pay attention to method number 3).

To use the Offline NT Password and Registry editor, you need to download the image from the developer's website (at the time of this writing, the latest version is 140201) and burn it to a disk, or create a bootable USB flash drive.

You can burn an image to a disc using any program for burning discs, but if you do not have such a program, then you can use InfraRecorder Portable (does not require administrator rights).

To create a bootable USB drive, you need administrator rights. Make sure the file on your flash drive is FAT or FAT32 (if not, format it). Download the archive, unpack its contents to the root of the flash drive. Then run Command Prompt as administrator and run the command there:

J: \\ syslinux.exe -ma J:

J is the letter of your flash drive. That's it, your flash drive has become bootable!

To reset the administrator password (or simple user) using the Offline NT Password and Registry editor you need to do the following:

Now load your windows. If everything went well, you can get into the desired account without a password.

Method 3. Removing the administrator password using the paid program Passware Kit Forensic

There are also paid programs to remove the windows user's password. One of these programs is Passware Kit Forensic, which costs just under $ 1000 (you can download the program itself and the key to it on the Internet if you search for Passware Kit Forensic 13.5.8557 upon request).

This tool allows you to crack passwords for over 200 file types. To crack a windows password, the program can create and burn a boot disk (or USB flash drive). The downside is that this requires an installation windows disk (or rather, the boot.wim file on it). And the plus is that you can create a media with a convenient graphical interface to reset the user's password.

To reset the windows administrator / user password using Passware Kit Forensic, do the following:

After rebooting, you can log into your account without a password.

SoftLakeCity.ru

0X80070005 how to fix windows 7

All passwords, especially complex ones, are often forgotten by us. Sometimes it happens that we write down their meaning only on a piece of paper, which is soon simply lost. In general, the situation is typical. Newbies are sometimes frightened by the fact that it is impossible to enter the system with a forgotten password. They do not know what to do in such cases. Formally, it is impossible to enter the system without a password (if it is set and enabled), but this situation can still be corrected. How exactly to do this, you will learn from our article. So how to remove password from Windows 7?

About SAM

On the seventh version of the Windows operating system, as well as on XP, the SAM system is used to store keys and usernames. All information contained in it is reliably protected from hacking. Therefore, in order to find out a forgotten password, you will have to spend a lot of time and effort. However, there are simpler ways to hack. And their main essence is to reset the password and replace its values \u200b\u200bwith new ones. That is, you will not be able to unravel the old information about the “Admin” or “Guest” user, but you will be able to enter the computer after the first reset. To do this, you will have to use several programs, which we will tell you about a little later.

It is also worth noting that when the OS is running, you will not be able to "break" into the password store and change any information there. That is why programs for resetting keys must be downloaded from another computer to a separate DVD / CD-disk or to a USB flash drive.

And now about utilities

The most famous program designed to reset passwords in computers with Windows OS is Offline NT Registry and Password editor. This utility is capable of working with almost all operating systems. This is XP, Vista, and Windows 7.

How do I use it?

Before you remove the Windows 7 password, you need to have access to another computer that does not use security keys or you know their values. It is a laptop or a stationary system unit - it doesn't matter. The main thing is that he has access to the Internet. So, we go to the world wide web and enter the key in the search engine (for example, download the NT Registry and Password editor). Download the program and save the exe installer to a USB flash drive or disk. After you've burned the image to disk, you can proceed to reset your password. Unfortunately, this program does not have a graphical interface, but it is not very difficult to understand how it works.

We insert a USB flash drive or disk into a "password-protected" computer and wait until it lights up Sometimes, to enable this program, you need to press the F6 button at one of the moments when the OS starts (similar actions are performed when installing a new operating system on a computer). In general, this utility starts itself, and all that is required of you is to press the Enter key.

What to do with the command line?

Boot from the removable media of the program and select the partition number on which your "operating system" is installed. If an error occurs, you will have to start the computer again. Next, the program will ask you to specify the path to the folder where the key storage file is located (that is, to the SAM system). A line like this should appear here: X: / Windows / System32 / config . This is the path to the password file. If the line is incomplete, complete it with appropriate characters. Now select the item called Password reset (it is the first in the list).

Then everything will be simple. After Password reset, select Edit user data and password. He is also the first on the list. Now you need to enter here or its identifier in the format 0xabcd. The last 4 digits are the RID listed in column I. It will be useful to us if the username (user) is displayed incorrectly or it cannot be entered correctly.

Now click on the item 1 - password reset. You can also change it. To do this, select section number 2 "password change". Then press the "!" and the enter key. This will exit edit mode.

To remove the password, then enter the character "q", press enter, then "y" and the enter key. That's it - the password has almost been reset. To exit, enter "n" and remove the flash drive or disk from the drive. Next, perform the Alt + Ctrl + Del combination - with this command you will restart your computer. All - Windows 7 account password has been successfully reset! In time, all this work will take you no more than 1 hour along with downloading and installing the program.

Are there risks?

There are no risks when resetting your password, even if you use this method for the first time. Files, folders and data after that will not disappear, as when uninstalling the operating system from drive C. After resetting the password, you will see the same familiar desktop with all saved shortcuts. That is, touching the bowels of the system (SAM key file), even by intuitive actions, you will not harm your computer. Everything is very simple and safe.

How to remove password from Windows 7? Method number 2

Here is another option for resetting the password on the Windows 7 operating system. To do this, you will have to prepare an installation disk with Windows in advance. In this case, you will enable the hidden administrator account by editing the registry from the OS installation environment. In the future, you can log in to the system under this account and edit at any time information about the passwords of any account that is registered on this computer. This will save you a lot of time. By default, "Admin" does not have a registered password, which only plays into the hands.

What do we need for this?

All you need to have is the original operating system installation disc. It is from it that we will boot and restore / reset protection in the SAM system.

So how to remove password from Windows 7? To do this, we need to boot from the installation disk and press the Shift + F10 key combination. This will invoke the command line. Here you need to enter the value "regedit" and press the enter key.

After it starts, you need to go to the HKEY_LOCAL_MACHINE section. To do this, select "File" - "Load bush ... ..". On the English version of the installation disk it will look like this: File - Load hive ... Now open the SAM file. It is located in the folder at / Windows / System32 / config (that is, where the operating system is installed). When you open SAM, the computer will prompt you for the value for the hive to load. Here you can type any combination of symbols and keys.

Then select the key located at KEY_LOCAL_MACHINE / hive name / SAM / Domains / Account Users / 000001F4. In this case, double-click the right mouse button on the F key. The editor will appear on the screen, in which you will need to go to the I number of line 038 (this is the number 11). This value must be changed to 10. Do not change any more data. Other numbers cannot be added or removed. To in windows system 7 to disable the password, further highlight the "HKEY_LOCAL_MACHINE / hive name" hive. Then from the menu select "File" - "Unload Hive". On English versions of Windows, select File - Unload hive. Now confirm to unload the hive and restart your computer. First you need to remove the installation disk from it.

But that is not all. To reset your Windows 7 password, follow a few more steps:

1. Log into the system with your Admin account.
2. In the control panel, select the "user management" section. Here you can remove Windows 7 password.
3. Change the forgotten password to a new one or reset it.

It should be noted that here you can change the key not only for the administrator account, but also for other accounts.

Like Method number 3

This is perhaps the most difficult method of resetting key data from a SAM file. And all the complexity and danger lies in the fact that here we will be dealing with the substitution of system files.

As you know, in each "Windows" the function is set by default Sooner or later, everyone encounters it - if you press the Shift button on the keyboard five or eight or more times, a short but very nasty sound will sound from the speakers, and a small window will appear on the screen ...

This window belongs to the sethc.exe utility. The latter is the basis of the OS system directory. It also launches on the welcome screen, namely when you are prompted to select a user account and enter a password. You can replace this useless program with something more interesting, for example, cmd.exe (command line). Naturally, it will not appear every time you start, but only if you boot from the installation disk and press the Shift + F10 key combination.

How does it work?

You must start resetting your password by determining the letter character of the drive on which the OS is installed. To do this, just enter the value “dir. C: "and view the contents of the section root.

Then copy the original sethc.exe file to the root of the disk folder, and replace the second with cmd.exe.

Then restart the computer and press the Shift key several times (until the command line is displayed on the screen). Enter the username and new password in it as follows: net user username new password. An illustrative example: net user admin 12345.

The values \u200b\u200bmay vary, but the "net user" at the beginning of the line remains unchanged. Also, when entering a password, you cannot put a space. And the username must strictly correspond to reality. If it is an administrator, then it is admin. If a guest, then after "net user" the value "guest" is entered in Cyrillic and so on.

A similar password reset algorithm can also be observed in the Windows-XP operating system. Therefore, even if you are familiar with the "seven" quite recently, then, knowing XP, it will be very easy for you to work with this OS.

How do I view the Windows 7 password? Unfortunately, this cannot be done. You just have to reset and set a new value.

That's it - now you can easily log into the system. Then, at your discretion, you can reset it or change these values \u200b\u200bagain.

Judging objectively, the fastest and easiest way to reset passwords is the first method. However, this does not mean at all that the other two are not effective.

Conclusion

So, we figured out how to remove the password from Windows 7. Choose any of the three above methods and reset passwords at any time in a matter of minutes. Good luck!

The password is very important to protect your computer from any malicious activity. Without it, anyone can exercise deliberate access to personal files and messages. email... On the one hand, the password protects the computer, although it somewhat slows down its startup, on the other hand, it can become a problem for the user if he has forgotten it. Then you have to reset your password in windows 7.

If you need to restore lost access for Windows 7, it is better to use a special program. Windows Password Key helps to disable, change, delete, bypass administrator and standard user code for Windows 7/8. 1/8 / XP / Vista.

Procedure steps:

Disabling the cipher reduces the security of the PC, so the user must make an informed decision before removing the password from the computer in Windows 7. This operation is performed from the account to which you must first log in. Sequencing:

1. Click on "Start" and then type "netplwiz" in the search box.
2. Press the Enter key. This command will load the Additional User Accounts panel.
3. Uncheck the box on the Users tab and enter your PC login information.
4. Click "Apply". When the "Auto Login" window appears, enter the name you want to disable the code for.
5. Click "OK" in the "User Accounts" window. When the PC starts up, the system will stop requesting this data.

Before you create a bootable CD or USB with a reset code with the Windows 7 operating system. Execution is performed on an alternative working PC. They use these drives to turn on a locked computer and quickly regain control over their account.

To create, download the full version of PCUnlocker from the link provided in the order confirmation email. The downloaded file is a self-extracting zip archive. After it is unpacked, creates an ISO image on CD or USB:

If you want to remove a forgotten user cipher on a domain controller, select the "Reset Active Directory Password"... When the Change dialog box appears, enter a new code for the selected account, or leave the field blank if you no longer need it. Click "OK" and "Restart" to restart the PC after removing the disc.

After that, you can log into your computer account with the new cipher.

Besides resetting your password windows administrator 7, PCUnlocker also allows you to bypass it by changing the Windows kernel. The whole procedure actually takes place without changes to the system files. For this you need to complete the following steps:

With PCUnlocker, you can bypass local passwords for Microsoft account and Windows 10/8/7 / XP - both 32-bit and 64-bit.

Administrator account

Removing a user's password in Windows 7 through an administrator account is a reliable method. If you forget the input codes, but the administrator's data remains available, you can change or delete the codes in the control panel. Before you reset your password for Windows 7, you need:

1. Start the computer and enter the OS.
2. Click the "Start" button in the lower left corner.
3. Open "Control Panel", "User Accounts", "Family Safety".
4. Click Add or Remove User Record.
5. Confirm "Delete password" and enter a new one in the text box.

CMD, or Command Prompt, is an administrative tool in the Windows operating system. It looks like MS-DOS and can therefore be difficult for beginners. You can use various on-line commands to fix system errors and problems. It can also help break the admin cipher.

The command line itself does not show the old code. It must be reset in advance, since without this you cannot log into your account. Resetting a Windows 7 user password from the command line is performed using the installation CD. Start CMD from another guest entry using a recovery disk. The above method requires available administrator rights. Before unlocking your computer, if you forgot your password, you need to use a bootable CD:

1. Insert the installation disc into a locked computer and run it through BIOS.
2. After opening the Windows installation window, configure the settings and click "Next".
3. Select "Repair your computer" at the bottom and "Next Windows" to continue after the "System Recovery Options" tab that appears.
4. Enter: c: \\ windows \\ system32 \\ sethc.exe and press Enter.
5. Enter the line: c: \\ windows \\ system32 \\ cmd.exe c: \\ windows \\ system32 \\ sethc.ext and press enter.
6. Enter exit and close the command prompt dialog.
7. Remove the CD and restart your computer.
8. When login appears, press the Shift key a few times to open sethc. ext.
9. Enter your username and new password and press Enter.
10. Log in to your computer.

Password recovery programs are called "password cracker" tools because they are used to "crack" by hackers. It is a legal practice to legally unlock your code. Most programs work with Windows 10/8/7 / Vista and XP:

Password recovery tools are not required if the user has previously created a disk to store it. This is a special disk that can be inserted into your computer during the logon process, which will allow you to change Windows passwords without the current one at any time.

It would be more correct to create this disk in advance, before losing access to your account and then demolishing the system.