How to set up the Internet on your tablet, as well as how to connect your tablet to the Internet, you will learn from this article. It describes the most popular ways to connect to the Internet. With links to detailed instructions... Do not hesitate to ask questions if something is not clear, than I can - I will help.

3G connection

Simple too. The same principle works as in phones. Insert the SIM card into the tablet, and it will figure out what to do with it (in some cases, the SIM card must be activated). Turn on Data transfer in the settings and the Internet to pick up. Some operators mobile communication send SMS with Internet settings. Problems are solved with the operator himself. And as a rule, all settings and instructions can be found on your operator's website, and they all boil down to one thing - you need to register an access point. For example like this:

• APN (access point): internet.life.com.by
• Name: blank
• Password: blank

This is done for Android 4. * in the settings, settings block WIRELESS NETWORKS, tab Yet.

Settings - "More" tab

There you choose an item Mobile network .

item "Mobile network" in the tablet settings

Connecting using a 3G modem

In short, you have to disable the PIN code entry on the modem and create an access point with the parameters of your cellular operator... And you may need to get it.

Internet connection using a computer via USB

In view of the rather large amount of material on this connection method, I decided to transfer it to a separate article on the site, which is called that. I warn you that the method is quite complicated, especially for beginners. And it requires the installation of additional programs on the tablet and on the computer. Root rights are also required.

Internet connection via Ethernet

An exotic way. It is used if you need the fastest Internet connection on your tablet. To make such a connection, you need a USB to RJ45 adapter and driver. You will have to look for the driver for your tablet yourself, I can only tell you where you can download uSB driver to Ethernet for Asus Eee Pad Transformer. Copy the zip archive to the device memory and install in Recovery mode. In a terminal emulator, enter the commands

su
usb_ethernet

Connect the adapter and Ethernet cable to the tablet. Since Android itself has no support of this type connection, turn on Wi-Fi.

A video about all the ways to connect your tablet to the Internet.

Hello dear readers, today I want to tell you about the methods of connecting the Internet to any tablet. If you have such a gadget at your disposal, but you do not know how to properly configure the network connection, then this guide will come to your aid. You should not set up anything for too long, you just have to follow all the steps step by step and everything will definitely work out. So, today you will learn about three ways to connect to the global network!

We use a Wi-FI router to connect to the Internet

If you have a PC and a router, then no problems should arise. If there is no such device, you can purchase it and then configure it. The router has many advantages, since the Internet will be available on a computer, as well as mobile gadgets. So, the procedure is as follows:

1. Open the gadget settings menu, go to the "Wireless networks" - "Wi-Fi" tab.
2. Select the name of the network and try to connect (if you previously set an access password, do not forget to enter it).
3. Profit!

We use a laptop as a router

All modern laptops have a special Wi-Fi module. If the laptop is connected to the Internet (using a cable or modem), then you can easily organize a router from the Wi-Fi module on a laptop using OS functions or software.

Connecting a 3G (4G) modem to a tablet

This method is especially convenient if you need the Internet to be constantly on the tablet.

Necessary devices:

3G modem;
OTG cable.
On Android gadgets there is an option "USB On-the-Go", just it will help in this matter. First, the modem must be connected to the gadget, then it will take some time until it is recognized. Then we go to the "Settings" - "Data transfer" tab. Click on the "Mobile Network" link and create an "APN Access Point". Point parameters must be obtained from the provider. If the setting was done correctly, then soon the Internet will work.

Find public Wi-Fi hotspots

If you cannot connect to the network at home, then you can find access points in a public place. They are usually located in large stores, parks, cinemas, etc. You can find them by their icons. Sometimes access to the network is paid, in which case you will have to send a message.

So, we have considered the methods of connecting to the network, which are the most convenient. You can use any of them.

When buying a tablet, the issue of connecting to the Internet becomes very relevant. Without it, the device will not be able to use all of its functionality and will become an unhelpful piece of plastic. There are many possibilities and ways to connect a tablet to the World Wide Web: the most common use of a SIM card and Wi-Fi, a computer with a special utility, a phone as an access point, and even the use of exotic adapters for a network cable. Let's consider each of these methods separately.

A tablet without the Internet is an unnecessary thing

mobile connection

Allows you to use the Internet wherever there is coverage. 3G has long been the norm for everyone; in many cities, even 4G communication is available, offering access speed at the home level. Depending on the need to purchase additional equipment and the complexity of the settings, you can use the access through the built-in SIM card slot, mobile 3G router and external 3G modem.

Built-in 3G module

Most modern models of Android tablets, even budget class, are equipped with a 3G module, which allows using the device as regular phone... If not every model can call, then access to the network is possible on any of them. You will need to purchase a SIM card from any Russian operator. Then choose suitable tariff for the Internet and make simple settings.

For settings on your Android tablet, you need to go to Settings - Wireless & networks - More - Mobile networks. Create a new access point. Operators offer automatic settings, but in rare cases they need to be set manually. You can learn more about the parameters from the operator's technical support.

For settings on iPad go to Settings - cellular - Cellular data network and add connection parameters. Some Windows tablets have a built-in 3G module. When connecting for the first time, click on the Internet icon - select the name of the operator - correct the parameters and make the connection.

3G router

This and all other methods will have to be used on those tablet models that do not have a SIM card slot.

Having bought such a router and inserted a SIM card into it, enter the interface using the information from the user manual or indicated on the router to establish an Internet connection. This requires a computer. When you buy a device in the operator's salon, the settings are usually registered automatically. After completing the procedure, connect to the Wi-Fi network from your tablet.

3G modem

Here you have to tinker a little, and in addition to the tablet and router itself, you will need a computer or laptop. Please note that this method is not possible on every model. If your tablet supports OTG mode, then proceed to the next step. Follow these steps:

1. Plug the modem into your computer. Wait for it to be determined by the system. The proprietary configuration utility should start.
2. Disable PIN verification.
3. Download the 3G modem program “Mode switcher” and install it on your computer.
4. Use it to switch the device to the "Modem only" mode.
5. After a successful mode change, disconnect from the PC and connect the modem to the tablet using the OTG cable.

Home Internet

Wi-Fi router

This is the easiest way to use landline internet on your tablet. If you already use it on other devices, for example, TV, computer, then just select your home network, enter the password and use it for health. You can also connect your phone if you want to save mobile traffic. If you have just purchased a router, then configure it on your computer via a disk with a utility or a web interface by entering the connection parameters of your Internet provider and applying a reliable protection method.

Ethernet cable adapter

It is the most exotic and rarely seen way to connect your Android tablet to the Internet. You will need a dedicated USB to Network Card adapter. It is unlikely that you will find it in every store, but you can order it on the Internet without any problems. This method is only recommended for very experienced users, otherwise you may ruin your tablet. Our next steps:

1. On the website http://forum.xda-developers.com, download the special drivers for your android tablet and install them in “Recovery” mode. Each model has its own drivers, so read very carefully.
2. Connect the tablet to the adapter via an OTG cable, insert the power cord into the router at one end and into the adapter at the other. The Internet should work.

Other computer equipment

Phone

Relevant when you have an Android or iOS phone and a tablet without a SIM card support, but with Wi-Fi. We will use the phone as a Wi-Fi router. To do this, on Android go to Settings - Wireless networks - More - Tethering - Hotspot wi-Fi access... Rename the connection and create a password. After activating the mode, you can connect to the Wi-Fi network on the tablet. On iPhone, this mode is activated through Settings - Cellular - Tethering. Please note that the battery of your access point will quickly deplete, so you can connect your phone via a USB cable and activate the USB modem in the settings.

Laptop and special programs

When there is a computer or laptop connected to home internet, and there is no router, try installing a special program for organizing an access point from a laptop. The most famous are “Connectify Hotspot” and “MyPublicWifi” (more on this - How to share Wi-Fi from a laptop Windows 8 (8.1), Programs for distributing Wi-Fi from a laptop). It is very comfortable to use this method when traveling, since not all hotels have a wireless connection, while a cable can be in every room or when it is not possible to buy a router for the home, or is simply impractical.

Conclusion

We have considered all possible ways connecting the tablet to the Internet. Choose the one that is most appropriate in your situation and depending on your technical background.

How do you connect to the Internet? Leave comments.

Articles and Life Hacks

When purchasing a tablet, the consumer, first of all, plans to use it as a guide to the World Wide Web. Therefore, after purchasing a gadget, the buyer is faced with the question of how to connect the Internet to the tablet.

How to do it via wi-fi

If you doubt that it is in your power to independently make the connection of an electronic gadget and the Internet, then the following instructions will help you. In this case, all that is required:

• A charged electronic device.
• Opening the device menu, going to the settings section and searching for wireless networks.
• Activation of the wi-fi mode, after which you must enter the data to obtain permission for the connection.
• Go to the browser to test the network.

This algorithm of actions is suitable for most gadgets on Android and IOS OS.

3G connectivity

There are several types of tablets: with and without a built-in 3G module. If there is no module in the gadget, then you will have to use auxiliary means.

1. Take a 3G enabled modem and put it in Modem Only mode. Upon completion, you will need to connect the modem to the computer to activate the mode.
2. Connect the modem and tablet using the USB OTG cable. Download an application called PPP Widget on the gadget, thanks to which the electronic device can work on the network.
3. Enter the password and access point for connection, you can get this information from the operator.

If there is a module, it simplifies the procedure. You just need to go to settings and turn on 3G.

Before purchasing a tablet, you should think about what purpose your purchase has and where you will use the device.

If you will spend most of your time at home, while at home you have demon wired Internet, then it is best to purchase a device with an internal Wi-Fi module.

In all other cases, it is better to opt for gadgets with built-in 3G, thanks to which you can go online anywhere.

Greetings to all readers of the site! Today we will talk about. The tablet computer is a multifunctional device designed for a wide variety of tasks. People buy tablets for specific purposes: watching videos, reading books, playing games, working and, of course, surfing the Internet. But at the same time, many face problems when connecting the tablet to global network... The solutions to these problems are different, and in this article we will consider, how to connect the tablet to the internet.

There are several surefire ways to connect the Internet on a tablet, and they all have their positive and negative sides. Nevertheless, we will focus on each of them to help you determine the method that is right for you.
The first method is to connect to a wireless wi-Fi networks... This method is suitable if you are near the hotspot in a public place or in your home. Almost every tablet, except for the cheapest models, has a built-in Wi-Fi receiver. Naturally, in the settings of the tablet, you can enable and disable this receiver.

Therefore, you need to go to settings, turn on Wi-Fi, and after that the tablet will find available networks by itself. You just have to click on the desired network, enter the access password and use the Internet.
The second method will work if your tablet has support for 3G networks and a SIM card slot. This method is convenient because the network coverage is almost everywhere, so that you can access the Internet anywhere.

Here everything is also very simple - the connection principle does not differ from that in mobile phones... You just need to insert a SIM card into the tablet, and he must configure the connection himself. You just need to enable the "Data transfer" function in the settings. If you need additional Internet settings, you can request them from your mobile operator.
Third way, how to connect the tablet to the internet - using an external 3G modem. First of all, you must make sure that the modem can be connected to the tablet (directly to the USB connector or via an adapter).

Then put the 3G modem in “modem only” mode - for this you need a computer and Hyper Terminal program.

After that, set the "Data transfer" function in the tablet settings and connect the modem. After it is recognized by the tablet, select the "APN Access Points" menu item and create a new point - enter the access data of your operator. Save all settings and surf the internet.
The next way is rather exotic - connecting using the Ethernet connector. Such a connection is used if you need fast internet on your tablet, or if your home router is not able to distribute internet via Wi-Fi. To connect, you need a special USB to RJ-45 adapter and special drivers for your tablet, which you can find on the manufacturer's website.

USB to RJ-45 adapter

Then just connect the adapter with the Ethernet cable inserted into it to the tablet and turn on the Wi-Fi mode in the settings.
Another way will help resolve the issue, how to connect the tablet to the internet in the event that your device does not have Wi-Fi or 3G, but there is Bluetooth. You will need any phone or smartphone with this technology and the Internet configured on it. You must make both devices paired, then download the bt DUN program to your phone and install it on your tablet. After that, launch this program on your tablet and press the "Connect" button. She will pick up the Internet settings on the phone and distribute it to the tablet.
As you can see, there are many ways how to connect the tablet to the internet - use any of them and enjoy access to the global network.