It is necessary for those people who want to untie their router from the card of a certain operator. If we are talking about a 3G or 4G device, then every second owner will face this problem. The fact is that, as a rule, people with such equipment change tariffs every few years. It is often necessary to unlock the modem for those buyers who live outside the city and periodically move to the city.

Often the operators used in different locations are different. That is why, in order not to buy several routers, you have to deal with the question of "how to unlock the modem." Speaking about the issue of blocking in more detail, it should be noted that almost all devices sold from the hands of a provider do not accept cards from another operator. That is, if a SIM card from Beeline is inserted into a modem that was purchased from Megafon, it will not work. There are two ways to unblock the modem: free or paid. This article will cover both methods. By the way, the question of how to unlock the Beeline modem is quite relevant for consumers.

Unlocking the old device

If the router model is old, and the device was purchased several years ago, then unlocking can be done by IMEI. We are talking about an individual device number that is assigned at the factory. It is usually located under the cover of the device. Moreover, the same number can be seen on the icon or label that is included in the box of the device. Thanks to this number, you can easily get a code to unlock the modem, this must be done using third-party programs. Often all providers use modems from one Chinese company, we are talking about Huawei. That is why the utilities that are suitable for such devices will be described below. How to unlock a 3G modem? The methods below are also suitable for this type of device.

First step

First, you need to find a program on the Internet that supports Huawei Modem. You can choose any assembly, both the newest and the oldest. The only difference between them is in additional functionality. The main objective of the program remains unchanged. After installing the program, it will automatically replace the previous connection manager that was installed with the modem. Do not worry about installing the drivers, as they will remain normal, that is, access to the router will remain. Do not remove them before installing this device, since without them it will not be possible to unlock the device. If, nevertheless, they were removed, then you need to reinstall them. To do this, you should either reinstall the router into the computer, knocking down the settings, or install the file from internal memory modem by yourself.

Additional Information

Before downloading the program, you need to make sure that it is able to unlock the modem you are using. As a rule, the list of devices is provided either in the characteristics of the software on the site, or during installation. The model number can be found either in the instructions or on the box of the device. If everything fits, and the program is designed to unlock a specific model you need, then it must be installed. After that, you should reinsert the modem into the computer, but with new sim card, then run it in automatic mode. After that, an unusual dialog box will appear, in which you will be required to enter the device unlock code.

It should be noted that the modem (router) in some cases, when using a new SIM card, knocks out a similar requirement. If you already have this setting, you don't have to bother downloading an additional program.

Step two

Having successfully completed the first step, you need to move on to the second. To do this, you need to download an application called Huawei Calc. Further, after downloading it, you should unzip it and run it. We will see a dialog box in which in the first line you will need to enter the IMEI device. Then you do not need to enter anything, you just need to press the Calc button. Then the person will see several lines with the generated code, but the user needs to fill in only one, which is called NCK. This value is the unlock code for the device.

Step three

This step is necessary for those people who have encountered certain problems when working with softwarewhich is described in step # 1. This problem is just as relevant as the question of how to unlock the Beeline modem. Sometimes it happens that the modems do not recognize this program, respectively, the dialog box with the unlock code is not displayed. In order to fix this problem, you need to open the Huawei Modem Telminal program.

This software allows you to work with the modem through service commands... You need to open it, select the item labeled "Interface", and then press the button "Connect". After that, it is necessary to enter the AT command in the lower field. It will allow you to understand if the modem is working and sees its computer. If the outcome is successful, the message "OK" will appear. This means that you can control the modem from this terminal. In the help of the program, you need to see what commands are needed to unlock the modem.

You cannot avoid using the Calc program, as you will still need the NCK code. Unblocking in this case will occur through the terminal, there are 10 attempts in it. If all of them are exhausted, it will be very difficult to unlock the modem.

Methods for old / new devices

If the modem router is old or too new to find software that is designed to unlock the device, then you need to turn to this method. Recently appeared new programcalled Huawei Unlock Code Calculator. She is able not only to generate a code for the firmware, but can also unlock almost every device.

When working with the program, you must select the required unlock code: V1, if the program is with the old firmware, and V2, if with the new one. It is enough to enter IMEI in the dialog box, both codes will appear. To understand how old the firmware is, you can look at the information on the official website, however, in general, you can check the performance of both the first and second codes. Either way, one of them will do. How to connect an unlocked modem? It is enough to change the SIM card and insert it into the computer.

Universal method

Another method, which in any case will help to reflash the router for any operator, but it is paid. You need to download the DC-Unlocker program. After that, it is necessary to check whether the this program blocking for the desired modem. To do this, check the name of the device with the options offered on the site. It should be noted that this program works with almost all known modems.

Before working with this program, you must install the Russian language. After that, in the dialog box, you should select Huawei as the manufacturer, the model number can be specified in automatic mode, if desired, it is allowed to select the device name in the drop-down list. Next, you need to click on the button that shows the magnifying glass. After that, the program generates all the necessary data about this modem router. What can you see there? The most important items among all the information will be the blocking status and the number of attempts.

Paid unlocking

If the device is locked, and there are still attempts to unlock it, you need to return to the site and register on it. It should be noted that you have to pay to work with the device. If the modem is old, then you must select in the program to unlock the modem by iMEI code... In order to do this, you will have to pay 4 euros. The purchase is worth it, because the question of how to unlock the modem for all SIM cards will be decided.

If the model is new, then the cost is slightly higher, and unlocking is also carried out by IMEI. However, the unlocking method and technology are slightly different. You must select the desired item and return to the payment page. After it is done, the user will see the login and password for working with the program. After the user returns to the program, he will need to enter data in a special section called "Server". After that, you just need to press the unlock key, after "Run" and wait a while. The message "Successful completion of the flashing" appears. So the question of how to unlock the modem for all operators has been resolved.

Articles and Life Hacks

The modern mobile technology market is able to offer us a wide range of devices compatible with domestic LTE networks. Our article will tell you about how to insert a SIM card into the Megafon modem using the example of the M150-1 4G modem.

This task is quite simple, does not require technical skills, and even a novice user can cope with it.

What is the Megafon M150-1 modem

Today the company offers at least three 4G modems. For example, modems such as the E392 and M100-1 provide a reception speed of 100 megabits per second, while the M150-1 is capable of providing 150 megabits per second.

It is about the last modem that we will talk about. It is noteworthy that the price of all three devices is the same regardless of the reception speed.

• The М150-1 modem is more compact than the others. It is offered in one of two color options - white or black. It's easy to find on the operator's official website detailed instructions to this device.

  Thanks to the modem, we will be able to provide ourselves with access to the network wherever it is convenient for us.

• To get started on the Internet, we don't even have to configure anything, since all the presets are already built into the device by default.
• In addition, at the very first connection of the modem, the system must install all the necessary software itself. Well, the current operating mode will help us to trace the special glowing indicators.
• The M150-1 modem was manufactured by Huawei at the request of the operator. In some regions it is not yet available (this is due to the fact that 4G continues to expand, but the coverage area is still not everywhere).
• Users note the excellent speed of the modem and support for memory cards. The device is also offered for a reasonable price.
• Of the shortcomings, it can only be noted that even despite its compact size, the modem still remains quite large compared to gadgets ordered by other operators.
• Of system requirements select the presence of a standard USB interface, Windows or Mac OS X, at least 1 gigabyte random access memory and 100 megabytes of free hard disk space, as well as a minimum screen resolution of 800 x 600.

SIM card installation instructions

1. We install the SIM card in a special side slot, and then install the micro-SD card (the slot is covered with a cap).
2. It is strictly forbidden to extract them in the process of work, otherwise all information may be lost.
3. Remove the cover of the USB modem (on some models, the slot is flip-out, which provides additional convenience).
4. We connect the device to a PC or laptop.

We add that the operator's modem usually supports a number of standards, between which we can easily switch. If desired, you can also specify a single network through the settings.

what will happen if you insert an mts sim card into the modem from a megaphone? what will happen if you insert an mts sim card into the modem from a megaphone? and got the best answer

Answer from Alexander Maltsev [guru]
The modem will not work, you need to reflash the modem. There is a program for flashing.

Answer from Aydar Kalimullin[guru]
Will not work

Answer from Yotalin[guru]
If the modem is not unlocked, it will not accept someone else's card.

Answer from Ѝndi Ts.[guru]
IF THE SYMBOL IS FOR A MODEM WILL WORK. ... I haven't tried it though. ... But in theory it should work

Answer from Vladimir Vasiliev[guru]
megafon building will change to MTS but will not work

Answer from Nik smirnov[guru]
in the megaphone settings, select (network) further registration mode. manual search and registration. if mts is found there, then it will work

Answer from Dfdjhfkdshkfhsdkhfjks hjkhjkhjkhjkhkhk[newbie]
will not work
when forced connection attempts - block
ask the sysadmin or hacker to flash the modem.

Answer from Lada[newbie]
So, the way after which the modem will eat the sim of all operators (tested on Huawei USB modem E160G, sharpened for BeeLine). After the unlocking, there is a sim of all operators (tested on MegaFon, MTS, BeeLine). When using the above sim cards, the modem was connected at a speed of 236.8 Kb / s, which corresponds to the EDGE standard. The connection is stable, does not break.
The SIM card that comes with the modem can not be pulled out of the box at all, but used when needed.
You can immediately insert the desired SIM card into the modem. After that, connect the modem to the computer. The installation of the drivers and the Beeline Internet Home (BID) program will begin. After installation, BID will start and immediately swear that the wrong SIM card is being used and will close. When you try to start it again, it is the same.
We do not despair, but through the FAR program we go to Program Files Huawei E160G Beeline Internet at Home and find the atcomm.dll file there. Press F4, and then search through F7 we find the word CARDLOCK and replace the letters in this word with zeros. We leave, we are saved. All. Now BID starts up, does not swear and does not close. Can read incoming sms, but you won't be able to send it (and nafig?).
At the same time, it will not be possible to connect to the Internet via BID even with a newly created profile for the desired operator. You need to create a connection manually and enter the necessary settings for the modem. This information can be found on the official websites of the operators.
After the manually created connection, you can freely access the Internet. In this case, the BID will count the traffic. You can also disconnect the connection through it.
Do you think that's all? You are mistaken. I want more, namely, to check the balance.
Since BID sends a standard request for Beeline to check the balance using the * 102 # command, it needs to be replaced with a command that another operator uses for this purpose. To do this, go through FAR to Program Files Huawei E160G Beeline Internet Home pluginsUSSDUIPlugin and find the USSDPluginConfig.xml file there. We open it through F4 and look for the line
*102#.
In this line, change * 102 # to the desired command. For example, I work through MTS (* 100 #). Megafon-Siberia has * 100 #. Megafon-Moscow has * 102 #
After that, in the same place we are looking for the line
*110*10#.
The command * 110 * 10 # allows you to find out the federal number of your SIM card from Beeline. We change this command to the required one. Close the file and save.
Now, through the BID program, you can check the balance and, if necessary, find out your number.
The only thing that cannot be viewed through the BID is the received signal level.

For many people, buying a 3G modem from MTS is the only way out for fast and inexpensive Internet access. And it should be noted that this operator provides high-speed access to Internet resources - this is evidenced by independent tests of large analytical companies.

When buying a modem, we receive not only a subscriber device, but also a SIM card with a certain tariff plan (usually this). By installing a SIM card inside the modem, we can immediately access the Internet. Next, we just need to replenish the account monthly (by phone number) - and there will always be access to the network at hand.

If you purchased an MTS modem and do not know, and configure it for full use, then perhaps you will be interested in another article located at the link above. Now let's imagine a situation that another operator offered more favorable rates for Internet access. Or it turned out that the speed of access to the network from another operator in a given point of the city is much higher. What to do?

A simple answer suggests itself - you need to install a SIM card from another operator into the modem. But when you turn on the modem, we will see that the modem asks for an unlock code - this means that the MTS operator has locked the modem for working with its SIM cards. How to unblock MTS 3G-modem to work with SIM-cards of another operator?

In order to unlock the MTS modem, you will have to use special programs. First of all, we will look at modems from Huawei, and then we will take on modems from the ZTE brand. They have different unlocking procedures, but the result should be the same - both the modem must accept the SIM card of the "foreign" operator.

Some models of modems are unlocked directly at MTS offices.To do this, the subscriber signs a corresponding application indicating the IMEI of the device. Within a few days, the operator will provide the unlock code.

Unlocking Huawei MTS Modems

The easiest way to unlock a Huawei MTS modem is to find a universal firmware for it. It will not only replace the modem's firmware, but also replace the built-in MTS-connection with a universal program. Moreover, there may be configured profiles. If there are no configured profiles, it doesn't matter - let's create a connection profile manually with the following parameters:

• Profile name - indicate at your discretion, but it is better to enter the name of the operator;
• Dial-up number - * 99 # (for operators MTS, MegaFon, Beeline and Tele2);
• Login - mts for the MTS operator, beeline for the Beeline operator. For Tele2 and MegaFon, the login remains empty;
• Password - mts for the MTS operator, beeline for the Beeline operator. For Tele2 and MegaFon, the password remains empty;
• The access point is internet.mts.ru for MTS, internet.beeline.ru for Beeline, internet for MegaFon, internet.tele2.ru for Tele2.

Everything is very simple and accessible.

If you don't want to mess with the firmware (as a result of an unsuccessful firmware, you can get a "brick" - this is the name of the victims due to the replacement of the device firmware), you should use online calculators that calculate the unlock code (NCK). There are also special programs on the network that calculate this very code. By the way, the calculation is tied to the IMEI of the modem - this number is indicated on the packaging and on the sticker (on the back cover). We enter IMEI into a calculator or program, enter the unlock code into MTS-Connect and enjoy the unlocked modem.

Do not try to enter numbers at random - after the tenth attempt, the modem will be blocked, as a result of which you will need to reset the built-in counter. If you are afraid to use software to obtain an unlock code, use free help on specialized forums.

You can download alternative firmware for Huawei modems. The user can choose from several software assemblies that differ in the support of certain models. Specify the model of the unblocked modem, download the appropriate software and follow the attached instructions.

Unlocking ZTE MTS modems

How to unlock an MTS modem from ZTE? We recommend using the DC-Unlocker program, which can unlock modems from the specified brand. In the program settings, you can find the option to unlock modems from other brands.

Select the brand of your modem, click on the "Unlock" button - the program will do the rest by itself. There are many other ways to unlock MTS modems - they can be used various programs, utilities and online services. But if you are afraid to turn your modem into a "brick", seek help from specialists.

Sooner or later, you will face a situation when another operator has better connection, better internet speed, cheaper tariffs and you would like to switch to it, but the trouble is that your modem does not work with another operator. If you insert a SIM-card from Beeline into a modem from Megafon, it will not work. To correct this situation, you first need to unlock the modem. Many sites offer paid ways unlocking, I'll show you a free way.

The easiest way to unlock the modem is by its IMEI. This option is suitable for many modems. Let's assume that you have a Huawei modem. Basically, all modems from Beeline, MTS, Megafon are made by Huawei. Some modems from MTS are made by ZTE, but there are very few of them - this article will not talk about them. You can see the model of the modem on the label, it will say something like HUAWEI Mobile Broadband 320S modem. Or maybe E173, E171. IMEI will be written on the modem below.

First: find out the model of the modem and EMEI (they are written on the modem).

Then download Huawei Modem 3.5 software (link below). This program will replace the program from your operator that you installed when you first connected the modem to your computer. By the way, if you have not installed the official program from the operator, be sure to install it, since the drivers for your modem will be installed along with it.

The points:

Download Huawei Modem 3.5

Install the office. Program from a modem

Install Huawei Modem 3.5

When you start the installed Huawei Modem, the program will ask you to enter the unlock code. We need to get it.

Step two.
You need to download the Huawei Unlock Code Calculator program (link below). It is she who will give the unlock code. It is with the help of this program that supposedly paid unlocking is done on many forums.

After starting the program, you must enter the IMEI of your modem and then press the Calc button. A lot of numbers and letters will appear in different fields. We only need the v1 code field - this is the unlock code. It must be entered in the unlock code field in Huawei Modem 3.5

The points:

Download Huawei Calculator

Enter your modem IMEI in the IMEI field.

Press Calc, then open Huawei Modem and in the unlock code entry window enter the code from the v1 code field

What to do if the modem unlock window does not appear.

The first is not to panic. To unlock the modem, you need to download the Huawei Modem Terminal program. If you have a code entry field on the second paragraph, and you unblocked modem, you no longer need to do what is written here.

After you have opened the program Huawei Modem Terminal, select your modem, it will be named something like this: HUAWEI Mobile Connect - 3G and press the Connect button
Then below we enter the command ATto check the connection with the modem. The modem should respond to this command: OK.

To unlock the modem write in the console: AT ^ CARDLOCK \u003d YOUR_V1_CODE and press Enter. If the modem answers OK, then everything is fine, you have successfully unlocked your modem completely free of charge! In another way, the code from the v1 field is called NCK. This was the old version of Huawei Unlocker, this article uses the new version. So if you are looking for NCK code, then the code from v1 is what you need.

If you have problems unlocking, be sure to unsubscribe in the comments.