How to fix the error "err empty response" - the most effective ways. Error ERR EMPTY RESPONSE: causes and solutions What does the error err empty response mean

If you see an error message (for example, "Shit ..."), then Chrome is having problems loading the page. The site may be slow or not open at all.

Page load error codes

The following error codes indicate that there was a problem loading the web page:

• "Shit ...".Chrome cannot load the webpage.
• ERR_NAME_NOT_RESOLVED. Non-existent web address.
• ERR_INTERNET_DISCONNECTED. The device is not connected to the Internet.
• ERR_CONNECTION_TIMED_OUT or ERR_TIMED_OUT. It took too long to connect to the web page. Possible reasons: either the connection speed is too slow, or too many users are trying to open the page.
• ERR_CONNECTION_RESET. The connection to the page was interrupted.
• ERR_NETWORK_CHANGED. When loading the page, the device disconnected from the network or connected to a new one.
• ERR_CONNECTION_REFUSED. The page didn't allow Chrome to connect to it.
• ERR_CACHE_MISS. The page asks to resend the previously entered data.
• ERR_EMPTY_RESPONSE. The site did not send data and may not be available.
• ERR_SSL_PROTOCOL_ERROR. The page sent data that Chrome couldn't understand.
• BAD_SSL_CLIENT_AUTH_CERT. Unable to sign in to a site (such as a bank or organization) due to an error in the client certificate.

The following problems may also occur:

• The site could not be found.
• The site does not open.
• HTTPS site won't open.
• Photo is not loading.
• New tab won't load.

To fix the problem, follow the instructions below.

Use the tips below.

Refresh the page

As a rule, it is enough to refresh the page.

Click the More icon.

If the problem persists

1. Check your internet connection

Make sure your device is connected to Wi-Fi or mobile internet.

Then refresh the tab with the error.

Step 2. Clear the cache

Data stored in Chrome may be preventing the loading of web pages.

Open the page in incognito mode

Clear cache and delete cookies

3. Close other tabs and applications

They may have taken up a lot of space in the device's memory, so the site cannot be loaded.

1. You can free up memory as follows:
   • Close all tabs except the one where you received the error.
   • Close running applications and stop downloading content.
2. Refresh the tab with the error.

Couldn't fix the problem?

Get help

• If all sites open except one, most likely, the matter is in the work of this particular site.
  • Refresh the page. If it does not open, write to us by clicking Post a review.
  • Turn on

Connection errors that occur in browsers can be roughly divided into two types. The first type includes errors caused by incorrect operation of the site or problems on the side of the provider, the second type - errors caused by problems on the user's computer. You cannot do anything with the first ones, it does not depend on you to fix them, it is a different matter when the source of the problem is hidden somewhere on the local machine.

For example, here's an error with the code 324 , sometimes encountered by users of browsers based on Chromium ... The error text is translated as "Empty answer" , that is, the server did not issue anything for the request. It is logical to assume that the problem is related to the site and in most cases it happens, but if the error appears when entering other resources, you should look for its cause on the computer.

Note: you can check the site for availability on the Internet using a special service Ping-Admin (ping-admin.ru/free_test).

So what can you do. To get started, go to chrome: // extensions and try disabling extensions, especially those that override IP -address.

Restart your browser.

If the error goes away, one of the extensions was causing the problem. In the event that you changed the settings proxy-servers in your browser, check if they are correct.

Reset your browser settings.

Resetting browser settings can be soft and hard. In the first case, all third-party extensions will be disabled, temporary data will be deleted, including files cookies ... A hard reset is tantamount to reinstalling the browser; doing it will delete all user data, including history, bookmarks, and saved passwords. In the same Google chrome: open advanced settings, scroll to the very bottom and reset using the option.

Hard reset - a radical measure, during which the user's folder with all its settings is physically deleted.

To perform such a reset, close the browser, go to Explorer at % userprofile% \\ AppData \\ Local \\ Google \\ Chrome \\ User Data and remove the directory Default .

Advanced users can dig deeper to find and delete other service directories for the browser.

Leaving a hard reset for last as a last resort, scan your PC for viruses (they can also throw ERR_EMPTY_RESPONSE error) and reset your local network settings to their default values.

You can reset the network settings with the command.

While working on the Internet, the user may encounter a situation when, when trying to enter a certain site, he receives a server error message ERR_EMPTY_RESPONSE (error 324)... In this article I will tell you what this ERR EMPTY RESPONSE error is, what are its causes and how to fix the ERR EMPTY RESPONSE error.

The error “ERR_EMPTY_RESPONSE the server dropped the connection without sending data” is quite rare, and usually indicates a disconnection with the server, from which the required data was not received. In addition to the warning itself, a reason may be mentioned that interferes with the transfer of data - for example, various browser extensions and other options. After this problem usually arises, how to prevent its occurrence, read the article.

Basically, the error ERR_EMPTY_RESPONSE is encountered by users of the Google Chrome browser, and cases of this error have been reported on the Yandex browser, Opera and Firefox. In the browser, Chrome also happens when downloading extensions.

Reasons for the error

This error was first recorded back in 2011, and now experts identify the following reasons for the error No. 324:

• problems with browser cache;
• problems with cookie settings;
• problems with various browser extensions;
• problems with malicious software;
• problems with the registry;
• problems with outdated drivers;
• problems with incorrect network connection settings.

How to fix ERR_EMPTY_RESPONSE

Below I will present several options for solving this error when opening. Before following my advice, try restarting your browser and computer. If this does not help, then follow the recommendations below.

Option 1. Clear the browser cache and cookies

Since the browser cache is one of the causes of this problem, it must be cleared.

Option 2. Remove unnecessary extensions

Click on the Chrome settings icon (three horizontal lines), then select "More Tools", and then "Extensions". Remove unnecessary extensions, leaving only the most essential ones.

Option 3. We use incognito mode

Try using incognito mode, which does not save data about your online activities. Click on the settings icon and then select "New Incognito Window".

Option 4. Reset the browser

You can try to reset the browser, for which we go to the settings again, select additional settings and click on "Reset settings" below.

Option 5. Reinstall the browser

If the previous options did not help to fix problems with sending data and with the server, try completely uninstalling the browser and then reinstalling it. After uninstalling the browser through settings and uninstalling programs, go to C: \\ Users \\ Username \\ AppData \\ Local \\ Google \\ Chrome \\ User Data \\ and delete the Default directory. After uninstalling, install a fresh version of the browser.

Option 5. Updating network settings

We use the command line, with which we troubleshoot network settings.

• Click Start, enter cmd in the search bar, but do not press Enter, but right-click on the cmd line that appears at the top (right under "Programs").
• In the menu that appears, select "run as administrator".
• Then we sequentially drive in the next set of commands.

ipconfig / release
ipconfig / all
ipconfig / flushdns
ipconfig / renew

netsh int ip set dns
netsh winsock reset

After entering these commands, be sure to restart your computer.

Option 6. Checking the system with an antivirus

Try to check your system with a powerful anti-virus such as Dr.Web Cureit !, Trojan Remover or AVG. After completing the verification process, restart your PC.

Option 7. Fix registry errors

To fix OS registry errors, we will use the functionality of auxiliary programs - Adwcleaner, CCleaner, Regcleaner, etc. Install one of them, and select a full scan of the operating system registry. After completing the check and fixing the errors found, reboot the system again.

Option 8. Updating drivers and installing updates

Update your system drivers and install any required system updates if you have them in the installation queue. One of the reasons for the ERR_EMPTY_RESPONSE error is a problem with the latest system drivers.

Option 9. Change the antivirus and firewall settings

In some cases, you can try turning off the antivirus firewall and turning on the system firewall. There were cases that this helped.

Conclusion

Usually the problem with this error is fixed by installing a fresh version of the browser or by clearing cash and cookies. If this does not help, try updating the network settings or checking your system with an antivirus - perhaps the problem is not in the browser, but in the more general settings of the operating system. If you used all the tips and the problem persists, then write a question in the comments to the article.

Hello! Today I will tell you about what the err empty response error is, why it can occur and how to fix it.
In general, I want to note the fact that lately people have often asked me what this or that mistake means. And the pages of the forums on the net are full of messages about one error, then about another. Of course, you cannot tell about all the errors in one article, so let's go straight to our topic.

The reason for this error lies in the following: when your browser cannot open a particular web page, the error message "err empty response" immediately pops up, and usually it is accompanied by code 324. In addition, you are informed that the page on the specified web -address is not available and they offer a signature (that is, specific data about this particular error that occurred).

If you decide to deal with the signature, you will understand that the information there is based on those empty data that your PC snatched from the provider - that is, something interferes with normal data transfer. In normal cases, this “something” is a virus.

Correction of the error "err empty response".

What steps should I take to fix this error and access the selected web pages?

1. Step one. Update your antivirus software. Maybe even install a good new antivirus program. Then scan your PC for threats, restart your computer and try to access the websites again.
2. Step one. If the error "err empty response" still pops up, we proceed as follows: we call the cleaner program for help. For example, CCleaner is a very convenient and free utility. With it, you can safely clean the system registry by removing any garbage and cache from it.
3. Step three... Well, if Ccleaner could not help you either, you will have to reset all network settings that you personally set while working with a PC. Resetting them will take you back to the default settings.

• In order to do this, press simultaneously on two keys Win + R;
• The command line appears, in the open field of which we write cmd and confirm the selection with the Enter key;
• In the window that opens, enter the command to return to the default settings - netsh winsock reset and again click on

Conclusion.

That's all you need to do to get rid of the "err empty response" error forever! After reading my article, I'm sure no one else will have a question: what is this err empty response error? If suddenly something remains unclear to someone, or you cannot correctly correct this error - please, write in the comments, I will answer and help everyone!

What is the "err empty response" error and how to fix it?

While working on the network, the user of the Windows operating system (regardless of the version and build of the system) may encounter an error, the text of which is as follows: “It is impossible to load the web page, because no data has been received from the server. Error code… ERR EMPTY RESPONSE ". In this case, the numerical code is different for each individual case. The error is common for all existing browsers.

Causes of the ERR EMPTY RESPONSE error

ERR EMPTY RESPONSE is translated as "connection to the server was interrupted". It indicates that the browser, when trying to load some page, terminates with an error. The reasons for this error are different. We will highlight the main ones among them.

• Browser cache problems;
• Problems with cookie settings;
• Outdated drivers;
• Damage to the registry;
• Incompatibility with browser extensions;
• Malware problems;
• Problems with incorrect network connection settings.

In addition, the ERR EMPTY RESPONSE error may appear when the router does not work correctly. Therefore, the breakdown of this device should also not be ruled out.

Solution ERR EMPTY RESPONSE

One of the causes of the ERR EMPTY RESPONSE error is the cache. Therefore, if this problem occurs, it is worth cleaning it. This is quite simple to do:

• Open your browser. Click on the tray (three dots in the upper right corner of the screen) and select "Settings".

• We select "Additional settings".

• We click "Clear history".

• Choose clear cache and click "Delete".

• After deleting the contents of the cache, it is worth restarting the browser.

The next reason that causes the ERR EMPTY RESPONSE error is extension. If you have installed any extensions, you need to disable them. To do this, go to the browser settings and select "Accessibility". Next, go to "Extensions" and disable suspicious ones.

If you do not want to remove your extensions or have not installed anything recently, then we recommend running the browser in "Incognito" mode. In this mode, the browser is launched with bare settings. If everything works fine, it means that after all changes have been made to the program settings.

Finding out what changes have been made to the browser settings is quite difficult. Therefore, you need to check the system for viruses, and then reset the browser settings. To reset browser settings, you need to open "Settings" and click "Reset".

If resetting the program settings did not bring a positive result and the error continues to appear on your PC, it is worth updating the network settings. To do this, do the following:

• We launch the command line with Administrator rights.
• We enter the following commands one by one.

ipconfig / release

ipconfig / flushdns

netsh int ip set dns

netsh winsock reset

After entering these commands, be sure to restart your computer.

Also, if this error occurs, it is worth checking the system drivers. If you have updated the Windows operating system, then it is worth rolling it back to an earlier state. The network drivers may have been updated and are not working correctly.

If the update was not performed, but it is worth updating the network drivers separately. To do this, open the "Device Manager", select the network adapter and right-click on it. We select "Update drivers". Follow the prompts of the Installer Wizard. After updating the software, you should restart your computer.

Alternatively, if the system settings have been changed and the ERR EMPTY RESPONSE error starts to appear, it is worth cleaning the registry. To do this, launch the CCleaner program and select "Registry", "Search for problems".

Then we select "Fix problems".

After fixing the registry, you need to restart your PC for the changes to take effect.

If the above methods did not help fix the problem, it is worth running System Restore. System rollback solves many problems, including the ERR EMPTY RESPONSE error.