After falling on android vertical stripes. On the tablet screen, stripes and ripples appeared - what to do? Flickering on charging

A television

When appear stripes on the screen sAMSUNG tablet Almost 100% its normal exploitation is blocked. The owner of the gadget cannot view the image, respectively, the comfort of use of the device is reduced. Since the breakdowns of this kind at home are not eliminated, we propose to urgently go to the consultation and for pre-computer diagnostics (we have a free complimentary) to our specialized service center. Here will be explained why the incorrect behavior of the tablet computer began, and also prompt how to eliminate the breakdown. Since you will not be able to repair the device yourself, then our highly qualified employees will hold the necessary rescue operation as soon as possible. At the same time, we will not require overestimated amounts by payment, on the contrary, we will offer minimal rates even on high-quality original components for replacement. When it becomes known why black stripes appear on the Samsung tablet screen, it is not difficult to eliminate the problems. By the way, at the end of the repair, we will certainly provide a warranty for one year - this is an important remark.

Description of malfunction and ways to eliminate:

If highlighting white and colored stripes on the Samsung Tablet ScreenThis clearly indicates the presence of the following listed defects:

The display is mechanically damaged (often strips appear after the apparatus drops, then you have to install a new original screen for replacement);

The screen controller failed (as a rule, advised to replace the corrupted controller);

The loop is defective (this is rarely found, but this option cannot be excluded).

How is the troubleshooting: stripes on the screen

To resume the full functioning of Samsung, you need to deliver it to its service center GSMmomoscow. To do this, call our courier's house or alone go to us. The address of the establishment is accurately specified in the "Contact Information" section.

When the device is already with us, professional, experienced masters are taken out:

Do you need to urgently eliminate breakdown?

No matter how surprisingly, but even at our minimum repair times, customers sometimes require even speed up.

The urgent repair of Samsung occurs when it is necessary to replace screens, glasses, speakers. It lasts such an operation for up to 20-30 minutes.

For promptness, it is not necessary to overpay - this is guaranteed.

The phone is very common. The main trouble is that such a malfunction can appear at any time: on the day of purchase or in a few years of use.

However, despite the frequent emergence of the problem, the owners of devices remain, which are not known to solve it.

What a defect looks like

The main thing is that it is worth remembering - the display does not lose performance after the malfunction is detected. But this is not a reason to throw a device in such a state, because only his owner suffers from the incorrect functioning of the smartphone. If stripes appeared on the phone screen, the image quality drops, so the reading and watching movies will have to be excluded (few people love to "break the eyes"). That is, there will be no sense in the presence of such a device.

The defect is manifested as a distortion of the content on the display. It ripples and goes strips (horizontal or vertical) different colors: from black to rainbow overflows.

Classification

According to this section, you can indirectly find out the cause of the breakdown, but it will be quite inaccurate. However, try.

For example, colored and white stripes on the phone screen are often a sign of mechanical damage to any component of the display or a loose passage of the loop in the groove.
Black lines sign about the need to replace this part of the smartphone.
Colored ripples talks about the problem with the controller.

However, without opening the case, such "diagnoses" do not have confirmation, so there is to help either your own hands or service centers.

As a defect is manifested

This section is also important, because it will make it clear to which part of the device (hardware or program) is a malfunction. Everything is quite simple here:

If the bands on the phone screen appear only when you start a specific application or making any changes to the settings and the device files, it is possible to fail the operating system.
When the lines go on the display after mechanical intervention, damage or when touching touchscreen, you can safely talk about problems in the "hardware".

After determining the type of malfunction, you should move to the methods of solving it.

The band on the phone screen: what to do?

If the problem is caused by mechanical damage, that is, two ways: to attribute a gadget to the service center or disassemble it yourself. In the latter case, you should look for a master class in the video format, where it will be shown how to open the case and get to the display. Next, it will be necessary to carefully explore this part of the gadget to understand the degree of damage.

If the problem is only in a loose contact of the loop in the groove, it is enough to simply correct, and the bands on the phone screen will disappear. But in the case when it or the controller (microcircuit) is corrupted, nothing but the complete replacement of components does not remain.

Under the program, a malfunction is usually correcting hardware reset (resetting settings, during which all personal data is deleted, it is recommended to save important files before execution) or cleaning smartphones from viruses. Although the first way is more reliable, since many programs for the protection of the OS do not see the pest.

Also helps flashing the device, but this item is better to fulfill only people with experience, otherwise the gadget on hand to turn into "brick". Although this is also an option, then the displays will be worried about less than anything, but it is not worth experimenting.

The reasons

The phone arise under a number of situations, since the modern gadget is a very fragile thing. Of the common reasons, it is worth highlighting the following:

strong pressure on the display;
blow or drop with high height;
moisture getting (provokes corrosion chip);
viruses who leveled into the system with unverified applications;
manufacturing defects;
breakdown controller;
break or loose loop;
overheating when charging;
system failure;
unsuccessful flashing or installing update.

And this is not all possible factors leading to breakage. If the smartphone is assembled from poor-quality parts, then it is enough just to shake a lot - and voila! Something inside and will deny. Therefore, there are dozens of nuances, it is impossible to predict all of them.

Precautions

To avoid such unpleasant consequences, you need to comply with the elementary rules for using the technique. Smartphones can not drop, wet, charge using an inappropriate adapter, disassemble without need. You should not give them as a toy to small children, as well as install applications from suspicious sources. Yet better decision There will be an installation of a program blocking advertising, then the phone is definitely not affected.

And of course, it is worth acquiring high-quality equipment. Otherwise, it is meaningless to even be surprised in the next breakdown, because nothing else owner does not expect such a "miracle".

What to do if the stripes appeared on the screen after the phone is dropped. PC4User video.

If the strips or ripples on the tablet manifested themselves after hitting or falling, there is a possibility that the loop connecting system fee Devices and display, jumped out of the connector. At the same time, the tablet itself is visually intact, there are no permanent black spots on the display or cracks. In this case, the device user can try to independently eliminate the problem. To do this, you will need to carefully disassemble the tablet, and insert the train in back into the socket on the motherboard.

In the event that you know that the tablet 100% has not fallen, but the bands still appeared on themselves, it will probably have to carry a tablet to the replacement of the loop. Unfortunately, he has a property with time to "wear out".

Mechanical damage to the matrix

If ripples, bands or spots on the display manifested themselves as a result of shocks, falls, and other physical influences, this may indicate damage to the matrix. This type of breakage can be distinguished from the previous presence of a crack under the touchscreen, or the presence of dark spots of various sizes, which retain their permanent position when the display is turned on. An independent repair can only be done if you have experience in replacing the display, as well as a new display in stock. Otherwise, it is necessary to carry the device into the workshop. The replacement cost varies depending on the model of the tablet and the size of the display.

Video crash

Sometimes the reason for inadequate behavior of the image on the display may be caused software failure. How to distinguish problems in the system from problems with a loop? If the tablet was not subjected to mechanical effects, but the image changes in colors in itself, or duplication occurs, the imposition of the image is one to another, try resetting the tablet settings to factory. If this does not give the result, you can try to reflash the tablet. And only if these manipulations did not solve the problem, it can be assumed that the culprit of faults is a train.

Cooling problem

With some budget plates Chinese production may be problems associated with their overheating, and a shortage of cooling. The tablet can work quite normally, but after a strong load (for example, after the games), it may hang, and the lanes will appear on the display. After some time, the stripes disappear by themselves, and the tablet works again. Such symptoms clearly indicate poor-quality cooling, or even on its absence. At home, it is possible to organize the cooling system only if you have knowledge and skills in this area. In other words, the service center will help us.

Flickering screen tablet

When the flickering of the tablet screen occurs, determine the cause is quite difficult. Let's look at how it happens. The first option is software, that is, you just need to update the firmware. It is unlikely, although often users eliminated the problem with the setting of the application for nutrition, sometimes the reason was in a specific energy saving profile.

The second option is a hardware. Here everything is again reduced to a non-high-quality contact between the display loop and its connector. More precisely, this is what can be checked. If the loop does not help, then only a specialist for diagnostics is needed and, as a rule, you will not achieve anything.

The fact is that the tablet screen flickers also in cases low-quality capacitors. They must be silicon, but often the manufacturers of China are trying to save on it. Sometimes a group of capacitors is not fully soldered. You can give them personally, although it happens extremely rarely.

A frightening situation - stripes appeared on the phone screen. But when using a mobile phone, no one is insured from this. And it doesn't matter how much time you use this phone, the problem may occur immediately after purchase or in a few years. Let's look at detail: why the stripes may appear on the phone screen, and what to do about it.

Causes of the appearance of strips on the screen

The emergence of the bands may be due to a number of reasons that are inevitable when using a cell phone:

drop from high height, blows, pressure on the screen;
moisture getting
failure in software;
viruses that can be downloaded and installed together with unverified applications;
overheating when charging;
manufacturing defects.

When using cheap assembly phones models, any fall, shake, a blow can trigger the contact breaks damage to chips and, as a result, the appearance of the stripes on the screen.

The bands themselves can also tell about the cause of the problem. If a black band appeared on the screen after falling on the screen, this suggests that the screen itself is damaged and its replacement is necessary. In case of moisture and mechanical damage, multicolored or white strips are possible. Blue, yellow, green stripes are talking about possible software failure. The appearance of the Red Stripe talks about the factory marriage of the display, in this situation, most likely, it will be necessary to replace it. The damage to the controller says the appearance of color ripples on the screen.

What should I do if the stripes appear on the screen?

If, in all signs, the appearance of the bands on the screen is due to a software failure, then at home can be reset to factory settings. If it did not help, it is better to contact the service center, where specialists will produce, flashing the phone and make it from viruses.

With mechanical damage and moisture getting into the phone, it is better to immediately attribute the device in, since the repair can aggravate the situation on its own and make repairs more expensive.

The appearance of the bands on the screen - the phenomenon is quite frequent. At the same time, the phone fully retains its performance and, the presence of bands, delivers the inconvenience when watching video, reading, etc. # On the phone screen appeared stripes # stripes on the screen # red stripes # multicolored stripes # blue band # white stripe # green stripes # yellow band # black band # why stripes on the phone screen # after falling

It would be possible to leave everything as it is and continue to use the phone, but if this breakdown is related to the damage to the phone, then over time the problem may be aggravated, and you will need more expensive repairs. Therefore, when the bands appear on the screen, if this fails to cope at home, it is better to contact a specialist in the service center. IN service centerAfter diagnosis, the problem can be solved quickly and for a small cost.

A frightening situation - stripes appeared on the phone screen. But when used mobile phone No one is insured from this. And it doesn't matter how much time you use this phone, the problem may occur immediately after purchase or in a few years. Let's look at detail: why the stripes may appear on the phone screen, and what to do about it.

Causes of the appearance of strips on the screen

The emergence of the bands may be due to a number of reasons that are inevitable when using a cell phone:

drop from high height, blows, pressure on the screen;
moisture getting
failure in software;
viruses that can be downloaded and installed together with unverified applications;
overheating when charging;
manufacturing defects.

When using cheap assembly phones models, any fall, shake, a blow can trigger the contact breaks damage to chips and, as a result, the appearance of the stripes on the screen.

The bands themselves can also tell about the cause of the problem. If a black band appeared on the screen after falling on the screen, this suggests that the screen itself is damaged and its replacement is necessary. In case of moisture and mechanical damage, multicolored or white strips are possible. Blue, yellow, green stripes talk about possible failure software. The appearance of the Red Stripe talks about the factory marriage of the display, in this situation, most likely, it will be necessary to replace it. The damage to the controller says the appearance of color ripples on the screen.

What should I do if the stripes appear on the screen?

It would be possible to leave everything as it is and continue to use the phone, but if this breakdown is related to the damage to the phone, then over time the problem may be aggravated, and you will need more expensive repairs. Therefore, when the bands appear on the screen, if this fails to cope at home, it is better to contact a specialist in the service center. In the service center, after the diagnosis, the problem can be solved quickly and for a small value.

What to do if the stripes appeared on the screen after the phone is dropped. PC4User video.

If the bands or ripples on the tablet manifested themselves after hitting or falling, there is a possibility that the loop connecting the system board of the device and the display jumped out of the connector. At the same time, the tablet itself is visually intact, there are no permanent black spots on the display or cracks. In this case, the device user can try to independently eliminate the problem. To do this, you will need to carefully disassemble the tablet, and insert the train in back into the socket on the motherboard.

Mechanical damage to the matrix

Video crash

Sometimes the reason for inadequate image behavior on the display can be caused by a software failure. How to distinguish problems in the system from problems with a loop? If the tablet was not subjected to mechanical effects, but the image changes in colors in itself, or duplication occurs, the imposition of the image is one to another, try resetting the tablet settings to factory. If this does not give the result, you can try to reflash the tablet. And only if these manipulations did not solve the problem, it can be assumed that the culprit of faults is a train.

Cooling problem

With some Chinese production budget plates, there may be problems associated with their overheating, and a shortage of cooling. The tablet can work quite normally, but after a strong load (for example, after the games), it may hang, and the lanes will appear on the display. After some time, the stripes disappear by themselves, and the tablet works again. Such symptoms clearly indicate poor-quality cooling, or even on its absence. At home, it is possible to organize the cooling system only if you have knowledge and skills in this area. In other words, the service center will help us.

Flickering screen tablet