How to unlock your phone if you forgot your stark password. How to unlock a pattern I forgot on Android

It is hard to imagine the life of a modern person without a mobile phone. Today it is not only a means of communication, but a place where a large amount of information is stored. Therefore, many users try to lock the phone and the programs installed on it. If there are a lot of passwords, there is a risk of quickly getting confused in them. Therefore, you should know in advance what to do if you forgot the password on your phone.

How to unlock your phone if you forgot your password

The user can set a password on the phone himself. This feature is provided by many manufacturers. If the code is entered incorrectly or the device is locked, then it will not be possible to use it in the future. What to do in this case? Reset the firmware, that is, reset all functions to factory defaults. This operation is carried out in different ways on different devices.

For Nokia phones

Let's consider several options for unlocking your phone.

1. Entering the service number - * # 7370

Turn off your phone. Press and hold three keys: the green call button, the asterisk, the number 3 key. Without releasing these keys, press and hold the phone's power button for a few seconds. If everything is done correctly, then after restarting the phone, it will be reset to the factory settings.

2. Contacting the official website

After 3 unsuccessful attempts to enter the password, the machine will be locked. It can only be restored using code. The latter can be found on the official website of the manufacturer. The master code is a sequence of numbers used to unlock the phone. In most Nokia devices, the code is calculated by the IMEI - the international phone number. It can be found in the warranty card or passport for the device.

3. Contacting the service center

If none of the above options fit, then you should contact the service center. Experts will determine what exactly was blocked (SIM card or device) and restore the phone's functionality.

For Samsung phones

Devices from this manufacturer are equipped with a security code lock function. If you lose it, you can restore the phone's operation through a special program - Samsung @ home 9.41... You need to install it on your PC and follow the instructions of the application. What else to do if you forgot your password on your phone?

  • Call from another mobile

    This recovery method is suitable only for modern smartphones. Dial the blocked number from another phone. Without accepting the call, go to the menu "Phone settings" In chapter "Confidentiality" select item "Reset" and confirm the operation. Reboot the machine. If everything is done correctly, the password will be reset.

  • Holding down certain keys

    If it was not possible to turn on the phone, then you can do Hard reset on older phone models: mini, Duos etc. To do this, you need to press 3 buttons on the phone: power, volume and home. After the logo appears, the power button can be released. Within 15 seconds, the engineering menu will appear. Use the volume key to navigate to Wipe data / factory reset... Press the power button to confirm the operation and follow the system instructions.

  • Resetting user preferences

    You can reset your password using the key combination *2767*3855# or *#56658378# ... The engineering menu will open, in which you need to select Hard reset or Wipe data / factory reset, confirm the operation. After the phone restarts, the password will be reset.

What to do if you entered the wrong PIN code on your phone

The PIN is the password for protecting the SIM card. It is issued when you connect to the network of a cellular operator. The phone requires a PIN code every time the device is switched on. If desired, the user can independently disable the verification of the code through the phone settings. In chapter "SIM Lock / Security"(or any other item with the abbreviation SIM), you must select the item "PIN / password request" and deactivate the option.

After three unsuccessful attempts to enter the PIN, the phone will be locked. What to do if you forgot your password on your phone? Take advantage of PUK code... It is indicated on the starter package of the SIM card. If the plastic card is lost, you can recover the password in one of the following ways:

  • send SMS to the room 9999 with the text: 375 XX XXX XX XX codeword... Its user indicates when concluding a contract for receiving communication services.
  • Through the Internet assistant of the cellular operator.
  • At the operator's Contact Center (if you have a passport).

To unlock your phone PUK code stands out 10 attempts... If all of them are unsuccessful, then the SIM card will be blocked. In this case, the user will have to change it in the Contact Center.

How to bypass Android password

You can lock your Android smartphone with more than just a password or PIN. There is also a pattern, a finger scanner and other protection methods. It is very difficult to hack them. But you can bypass and gain access to the device. Let's consider the most popular methods.

Using your own Google account

You can reset your picture password through google account on devices with Android 4.4 OS or earlier. After several attempts to unlock the lock, a link is displayed on the screen. Click on it. Log in to the system of the locked device. This will reset the pattern.

Any mobile device can be controlled via a remote service https://google.com/android/devicemanager... The manager page displays a list of all devices connected to the account. If the required device is not displayed in the list, then you need to refresh browser page... To restore access to the phone, click on the button "Block" in the Manager. The screen will display a window for entering a new password, which will replace the pattern, PIN. New Password need to indicate twice and then press the button "Block".

The data recovery process takes 5 minutes.

Reset picture password using ADB

This method can be used if the user previously managed files on a smartphone via a PC via USB using ADB. Connect the device to a PC using USB. Open a command prompt in the ADB directory and enter the command "Adb shell rm / data / system / gesture.key"... Reboot your phone. The lock screen should disappear.

Samsung "Find My Mobile" service

The easiest way to reset your password on Samsung devices is through the app. Find my mobile... It can only be used if the user has previously created an account with Samsung. Go from any available browser to the link https://findmymobile.samsung.com/login.do and log in in your Samsung account. In the left menu pane, select the option "Lock Screen"... Enter new code and press "Block"... Reboot the machine. The lock screen password should be changed to a new one.

Function "Forgot your pattern"

On devices with Android 4.4 OS and below you can restore access to data through the function. After 5 attempts unlock message will be displayed on the screen "Repeat after 30 seconds".

At this time, press the button "Forgot the key" at the bottom. A window for logging into the Google system will appear. You must enter login and password from the account. The system generates a letter with an unlock pattern and sends it to the specified email address.

What else can you do if you forgot your password on your phone? If the lock screen was created by a third-party application, then the easiest way to bypass it is by booting the device in safe mode. To do this, just press and hold the power key. In the new menu, select the option Turn off the power and confirm the operation. The phone will boot into Safe Mode. All third party apps will be disabled.

It is enough to uninstall the program or change the password and restart the phone again.

How to unlock your phone or tablet if you've already tried everything

What if I forgot the password on my phone and none of the above options worked?

Factory reset

Even an inexperienced phone user can perform a factory reset. This will remove all installed programs. The general sequence of actions was described earlier. There is no universal instruction, since the reset is carried out differently on each model of the device. The process itself takes 5 minutes.

Phone flashing

If the reset fails, then you will have to reflash the phone, that is, change the operating system. This is a more complicated process, so it is better to take the device to a service center.

Deleting the system files "gesture.key" and "password.key"

On devices with root rights, you can delete the system files responsible for unlocking the screen and changing the password. To work you need to download Aroma manager archive... Reboot the device and go to the menu Recovery holding three buttons Volume + Power + Home... On the menu "CWM Recovery" select.

Click to view all recently uploaded archives and find files by Aroma manager.

Open your file manager. Enter the path " / data / system /"And delete the files: "Gesture.key", "Password.key", "Locksettings.db", "Locksettings.db-wal", "Locksettings.db-shm".

Reboot your device. The password will be reset to zero.

Through TWRP Recovery

TeamWin Recovery Project is a modified Android system recovery application. Its functionality is broader in comparison with the official system recovery application. Therefore, on many devices, the program is installed simultaneously with the official application. TWRP allows you to change firmware, fix system errors, reset data, clear cache, and perform other system tasks. However, user files remain unchanged.

Clearing internal memory using Fastboot

Fastboot is a tool for flashing partitions. It is designed for quick software updates without data recovery mode. It is also used to solve a number of system tasks, including unlocking a phone. You need to connect the device to a PC via USB and start the mode "Fastboot"... A program for performing command tasks will appear on the PC. If this does not happen, then the selected phone model does not support Fastboot mode.

Remove password on phones with MTK processor

Apparatus with MTK chip should be reflashed with SP Flash Tool applications... This program allows you to install Recovery without clearing the sections first. You can also use TWRP or CWM utilities to delete files "Locksettings.db", "Locksettings.db-wal" and "Locksettings.db-shm"... This process was described in more detail earlier.

We try to protect our mobile devices in all available ways. And one of them is a specially drawn shape or pattern. This kind of password will not protect our confidential data and personal information from those who know how to technically extract it. Nevertheless, it will protect the device if it falls into "curious" hands. But there is one problem: we often forget what we have drawn and do not know what to do in this situation. Don't panic. There are several ways to unlock your phone. And we will look at how to remove the pattern from android using the simplest solutions.

To begin with, we suggest using standard operating system tools. And only if they are not available to you, choose other options.

Using a Google account

To unlock your mobile device, follow these instructions exactly:

This method is only suitable if the mobile device is connected to the Internet and you remember the login information for your Google account.

Now we will consider more options tested by other owners of smartphones and tablets on the Android operating system.

Reset

If the phone is new, just bought and has not yet managed to acquire gigabytes of personal information, you can safely use the factory reset. Returning to factory settings will allow you to specify a new picture and, accordingly, unlock Android.

If the phone has been in use for a long time and your personal information is stored on it, you will lose it when you return to the original settings. Your tablet or smartphone will delete contacts, saved records, messages, music and media content, photos, and any settings you changed. But you can protect at least the data that is stored on flash memory. Therefore, do not forget to remove the MicroSD before performing a hard reset.

Important information! It is recommended to do a hard reset only when the mobile device is charged at least 65%, preferably more. If you do not follow this advice, you will not be able to turn on your smartphone. This will not necessarily happen, but there is such a danger.

An example of a factory reset on Samsung phones

Since when blocking, we cannot simply enter the phone menu, the reset will need to be done with a combination of buttons. This combination is different for each mobile phone or tablet model. To find out it, go to the manufacturer's official website or find information on the Internet.

Samsung phones also use different keyboard shortcuts. But the general instructions for resetting the settings to the original, factory parameters are as follows:

  1. Disconnect your mobile device.
  2. Press three buttons, for example Power + Home (center) + Volume +.
  3. As soon as you see the Samsung screensaver on the screen, do not press the "Power" button anymore. But hold the other two buttons for another ten seconds. This is necessary in order for the recovery mode to appear - Recovery. It may not boot the first time. And if this does not happen, repeat your actions.
  4. After starting Recovery mode, you will find yourself in the Menu. To perform a hard reset of all personal parameters, we need to activate "Wipe data / factory reset". This is "hard reset" - erasing information. Navigate the recovery menu using the volume buttons.
  5. After selecting the appropriate item, open it using the "Power" button.
  6. Select "YES" and confirm the reset with the power button too.

Everything. Personal data and settings have been reset. After rebooting, your gadget is unlocked. The instructions given above are relevant for phones of any manufacturers. The only difference is in the key combination used to load device recovery mode. Again, the information can be found on the manufacturers' official websites.

So, you have learned how to remove the unlock pattern from an android if it is impossible to use the standard operating system tools. Yes, the method is tough, but in some cases the only possible, and most importantly safe.

Call from another number

This simple method can only be used if you have a very old operating system version - 2.2 or lower. Ask someone to dial your number or call from another phone. Answer the call, minimize the call window and click the Home button. You will see that the device is temporarily unlocked. Go to "Settings". All this must be done as quickly as possible. Open the menu, select "Security" and remove the pattern. That's it, the mobile device will no longer require you to enter a password until you re-enter it.

Discharging the device

In this case, we need to wait for the battery to discharge. When the battery charge reaches a certain minimum, a warning will be triggered. You need to enter the battery status menu and from there go to "Settings", where you can turn off the picture password.

New firmware

This option can also be used. A software update will unlock your device. But using this method is undesirable if your phone is under warranty service. By deleting the original firmware version, you lose the opportunity to contact the service center.

Service center

If you are afraid to make decisions on your own or you cannot unlock your phone in any way, contact the service center specialists for help. Such an appeal will not be considered a guarantee and will cost a certain amount of money.

Bypass blocking Android devices with a third-party application.

To use this option, you will need to root and download a third-party application. The essence of the method is that when you lock the screen, you will need to send a special message to the device itself. SMS serves as a kind of code that allows you to reset the pattern. To activate this feature, follow the instructions below:

  1. Access the super user account (root).
  2. Go to the Play Store, enter the name of the application "SMS Bypass" and install it on your Android device. The program is paid, the cost is only $ 1.
  3. Go to the program settings, change the preset password and grant root rights.

That's it, the application is ready to use. How it works? If your phone is locked, send a message to it with the following text XXXX reset (X is your key reset password). As soon as the text message arrives on the mobile device, it will automatically reboot. Then you can install a new pattern or use any protection method.

Can SMS Bypass be set if the phone is already locked? Yes, but you must have root rights, an Internet connection, and access to your Google account.

Video on removing the pattern on android

How to unlock samsung if forgot password, pattern or fingerprint? When we buy a new Samsung phone, we need to install some necessary things first. As far as I know, Samsung phone provides people with four kinds of protection. We may use these models to protect privacy and data security. Mobile phones can be called the closest friends. We always use them to chat with friends, send and receive text messages, take photos, browse the Internet, etc. We have a similar article: How to do it before factory settings?

We use telephones almost all the time. The phone records our lives and messages in silence. Therefore, we set a password so that other people do not view our phone. But have you ever wondered what to do if you forgot your password? How to bypass Samsung lock, pattern, password and fingerprint to remove them and restart the phone? How to unblock?

If you haven't updated your firmware to Android Lollipop (5.0) then there is a faster way to unlock your screen lock pattern. (Android 4.4 and below only)

1) Enter the wrong lock screen pattern five times (shouldn't be hard if you don't remember the correct one)

2) Select "Forgot your pattern"

3) You can now enter your backup PIN or your Google account login.

4) Enter either the backup PIN or Google login.

5) Your phone should now be unlocked.

How to Unlock Samsung Using Find My Mobile

This is an easy way to unlock your Samsung device if you have created a Samsung account and registered it in advance.

2) Log in with your Samsung login information.

3) On the Find My Mobile account interface, you should see your registered phone on the left. This indicates that you are registered with this account.

4) On the left sidebar, select "Unlock Screen".

5) Now select "Unblock" and wait a few seconds for the process to complete.

6) You should receive a notification window that your screen is unlocked.

7) That's all. Your phone must be unlocked.

How to Unlock Samsung Using Custom Recovery?

(SD card required). This method is for more advanced Android users who know what the terms "rooting" and "Custom recovery" mean. As the name says, for this you need any customized recovery and your phone must have an SD card slot.

Why SD card? Well, we need to transfer the ZIP file to your phone, and that's usually not possible if it's locked. The only way is to insert the SD card with the file. Unfortunately, card slots have become something of a rare thing in the smartphone world, so this will only work for some people.

Here's what you need to do:

Step 1. Connect your Samsung phone

Launch the software on your computer and select Screen Lock. Then use a USB cable to connect your Samsung phone to your computer. At this point, the program interface is as shown below, click "Start".



Step 2. Enter Download Mode

Second, you need to manually turn on your phone to enter download mode. The specific steps are as follows:
1. Disconnect your phone.

2. Press and hold the Volume Down + Home + Power button at the same time.

3. Press “Volume Level” to enter download mode.


Step 3. Download the recovery package

When your Samsung phone enters download mode, the program will automatically download the recovery package, which will take you a few minutes, please wait patiently.


Step 4. Remove Samsung lock screen

Finally, when the download of the recovery package is complete, the program will start removing the lock screen. Please be assured that this process will not lose any of your data. When this process is over, you can reuse your phone without entering a password.


How to Hard Reset Samsung Unlock?

See other ways below.... In fact, forgetting the screen lock password on your Samsung phone is a common thing. There are many ways to help you unlock passwords, pattern, and any other PIN codes for your Samsung smartphone. However, if you really don't have any method, a Samsung phone factory reset is also a good choice.

Step 1. Turn off your Samsung phone.

Step 2. Press the Home, Volume Up and Power buttons at the same time to open the recovery menu.

Step 3. After entering the recovery menu, use the volume down button to navigate, scroll to wipe data / factory reset and use the power button to select.

Step 4. Scroll down to "yes - delete all user data" using the volume down button to confirm deleting all user data and press the power button to select.

Note. Rest assured that you don't mind deleting all data on your Samsung device, it cannot be undone.

Step 5. If done, all user data including password, PIN, pattern, etc. will now be deleted from your Samsung device, please wait patiently until it is completed.

Step 6. Use the power button to select “Reboot System Now” and your Samsung phone will reboot automatically.

When you complete the above steps, your Samsung device is now as good as new, proceed with the setup. If done, you can now use your Samsung phone again. Now you can set a lock PIN, pattern, password for your phone, but please remember it.

In addition, since all personal data has been deleted, you can restore through the backup created by KiK, MobileTrans or other backup tool, now you can restore the backup to your Samsung phone.

Of course, today, graphic password protection is one of the most reliable, but when working with it, the question often arises related to how to unlock the phone if you have forgotten the graphic password. The fact is that users very often simply forget what they entered before. On the Internet, you can find many ways to solve this problem. But only a few of them work.

Therefore, this article will describe only those methods that really work and that other users of the Russian Internet have experienced on themselves.

Standard way

If your phone is connected to your Google Account, bypassing your picture password is a breeze. And if on your device version Android older than 5.0, this is so, because then the connection to all necessary Google services occurs automatically. True, the username and password still need to be entered, but usually this happens when the phone is turned on for the first time and after two or three days of use, a person already forgets that he has logged in somewhere.

In any case, if you have registered with Google, you must do the following:

  • Enter the wrong password several times and do this until the message "Forgot your pattern?" Appears on the screen. It is quite possible that this inscription will not appear right away and you will have to enter the wrong keys, then wait 30 seconds and enter the same keys again. In any case, when such an inscription appears, you must click on it.
  • After clicking on the inscription "Forgot your pattern?" the system will prompt you to enter your username and password from your Google account, as shown in Figure 1.

  • After the password and login are accepted, you can enter a new pattern.
  • Then it remains to try again to unlock the phone by entering a new pattern. An internet connection is required to follow these instructions. If there is no access to the World Wide Web, you should use the following method.

Phone call

This is a very simple to impossibility method, which consists in making a call to a locked phone. If Android version 2.2 or less is installed on the device, during a conversation it will be possible to go to the "Settings" menu item, then select "Security" and generally disable the input of the pattern.

In some later versions of Android, it is also possible to go to the menu while making a call and perform certain actions there. If the user still manages to enter the screen lock menu, he will see something like the one shown in Figure 2. There you just need to click on the "Remove protection" button.

This method is also very simple and requires little effort. There is another equally simple method that allows you to unlock your phone if you forgot your picture password.

Wait for a message about a low battery

This method is suitable for those who have a lot of patience and endurance. It consists in just waiting for the battery to be discharged and the phone will give an appropriate message about it. And when this message appears, you need to click on the message itself, which is shown in Figure 3. This will open the battery status window, which may differ depending on the version of the operating system. But we are not particularly interested in the appearance of the menu. You should exit from it, then go, again, to the "Settings", then select "Security" and disable the input of the pattern, as described above.

It is worth saying that this method and the method with a call to the phone can be used even if there is no connection to the worldwide network. But for the above method with authorization in Google, you still need an Internet connection. If there is no money on the account and there is no wi-fi point nearby either, it is better to insert another card with money in the account. After that, you will need to try again to log in to Google.

Also, the Internet can be connected using LAN. The fact is that in all cases it is better to use the same standard method. The rest are dangerous in that the user can do something wrong and disrupt the operation of the entire operating system due to his inexperience. There are also a number of methods designed for certain models of mobile phones. Let's take a look at the most common ones.

Unique ways to bypass picture password

Each firm gives certain unique features to its devices. Consider ways to bypass the pattern for different companies. It is important to note right away that in almost all cases the picture password will be reset along with all other data!

Samsung

The following Samsung models there are such special ways to bypass the key:

  • Galaxy S3- press the volume increase button and at the same time the large central button, then press the power button and hold it until the phone starts vibrating, then wait for the logo to appear and release the buttons, and in the window that opens, press the reset button to factory settings;

The appearance of such a menu is shown in Figure 4. The point in which the words "hard reset" appears is responsible for resetting to the factory settings.

  • Galaxy S2- press the button to decrease the sound level and simultaneously press and release the power button, a menu will appear in which you must press "Clear Storage";

Attention: This command will clear all memory! As mentioned above, this is true for most of the methods described in this list.

  • Galaxy Mini- press and hold the power button and press the center button at the same time, which will open the same menu that opens in the Galaxy S3;
  • Galaxy S Plus- press the volume up button and simultaneously press the power button, after which the same menu appears;
  • Nexus- press the volume up button and simultaneously press the power button, after which the same menu appears;
  • Samsung Galaxy Fit- press the big center button and simultaneously press the power button, after which the same menu appears;
  • Galaxy Ace Plus S750 0 - press the power button, the large center button and two volume control buttons, after which the same menu appears.

How to flash a phone - we disassemble step by step

Htc

In this case, you also need to open the system menu and find the command there, in which the words "factory reset" appear. Only access to this very system menu is different depending on the model. The menu itself looks something like the one shown in Figure 5.

On such HTC models like One V, One X and One S and other popular representatives of this company, you can get to the system menu by pressing the volume down button and simultaneously pressing the power button. After that, the HTC video logo will become. Now we just need to select the "factory reset" item we need and press the power button again. In general, on most HTCs, the algorithm for accessing the system menu looks exactly like this. If this is not the case in your case, this will be written in the instructions for the device.

Sony

In this case, you should use the PC Companion program, which is located on the official Sony website. The download link looks like this: support.sonymobile.com/en/tools/xperia-companion/. After following this link, you should go to the "Find your product" button, select your phone model and download PC Companion for it.

After downloading, the program is installed in a standard way. Now on the phone you need to hold down the Home button and hold it for about 5 seconds. Next, you need to connect your phone to your computer using a regular USB cable.

How and why do you need to connect your phone to your computer?

After opening the PC Companion program, you will need to do the following:

  • Press the "Start" button under the "Support Zone" menu item (shown in Figure 7).

  • Under the inscription "Software update" you need to press the "Start" button.

  • In the window that opens, you need to click on the inscription "phone / tablet recovery" (highlighted by an arrow in Figure 9). After that, you need to click the "Continue" button (highlighted in a blue frame in the same figure).

  • Now you need to press the "Next" buttons several times, read the terms and conditions and "Agree". It is important to remember here that all data will be deleted.
  • In the window shown in Figure 10, you need to select your phone model and click the Next button.

  • Now you need to follow the instructions that the program will indicate. These instructions may differ slightly from model to model. An example of such a window is shown in Figure 11. According to the instructions shown in that figure, you need to disconnect the USB cable, then turn off the device and wait 5 seconds, then reconnect the phone using the USB cable while holding down the volume down key. This is true for most other Sony models as well.

  • Now you just have to wait for the end of the installation of the new software. After it is completed, the system will display a corresponding message.

Now the picture password, along with the rest of the settings, will be reset and can be set again.

Lg

On LG phones you also need to get into the system menu and find the "Factory data reset" command there. The appearance of the system menu on one of the models is shown in Figure 12.

To get into this very system menu, you must take various actions depending on the model:

  • Nexus 4- press and hold the volume control buttons and at the same time the power button until the Android logo is visible;
  • L3- simultaneously press the "Home" button and two buttons for adjusting the sound;
  • Optimus hub- simultaneously press the volume down button, "Home" and the power button.

In some cases, immediately the item "Factory data reset". Instead, a menu will open where you will need to click the Recovery Mode item, and then click the shutdown button. After that, the Android logo will again be visible, after which you will need to press the power button and the volume up button again and hold them until a menu appears in which you need to select the "Settings" item. And there it will be possible to find the familiar and necessary item "Factory Data Reset". In particular, this algorithm is relevant for Nexus 4. In other cases, it is best to read the instructions for the phone. In addition, instructions for each phone model can be found on the official LG website or on other sites.

Huawei

Owners Huawei phones you will need to download a program called HiSuite. This can be done directly on the official website of the program - hisuite.ru. After the program is installed, you need to connect your phone to your computer, open HiSuite, select the "Contacts" menu item there (highlighted with a blue frame in Figure 13). After that, you will need to select the item "My e-mail". This will make it easy to find out the email address. Now you can use the standard method for such cases - repeatedly entering the wrong picture password and logging into Google services.

Below you can see how, in practice, the factory settings are reset on one of the Samsung phone models.

It so happens that a smartphone user forgets the password from his device. There are several ways to unlock your phone yourself if you forgot your password, but you have to tinker with it, since the easiest options may not work. Below are instructions for devices running on different operating systems - Android and IOS.

You should start with the fact that if you have a fingerprint lock, you need to configure this function, since there can be only ten fingerprint options for obvious reasons, and there are an infinite number of digital and graphic password variations. This option is very convenient, since the muscle memory of the hands will tell you which finger was used to block, and you do not have to remove the block with more time-consuming operations.

At the moment, for modern smartphones, there are several ways to remove the lock if the key is forgotten:

  • Smart Lock option;
  • Google user account;
  • contacting the service center;
  • self-reset to factory settings.

Smart Lock is a function that simplifies unlocking a mobile device and allows you to unlock it when one of the keys (or all) are forgotten. This option is applicable if the option was previously configured.

There are three smart unlocking methods through Smart Lock:

  • "Trusted devices" - allows you to bypass the blocking if there are nearby devices with "familiar" Bluetooth. The phone will unlock itself if the third-party smartphone has been previously marked as reliable in the list.
  • "Safe places" - unblocking occurs without entering a password, if the smartphone is within the specified territory.
  • "Face recognition" - unlocks if the front camera recognizes the face of the smartphone owner. This method will work if the room has good lighting and Android is able to set the features according to the previously set parameters.

It is important to remember that without first configuring Smart Lock, none of these options will work.

This function has one significant drawback - anyone can unlock the phone using the "Unlock by location".

After multiple incorrect password entry, whatever it may be, the message "Forgot your password?" Will appear at the bottom of the screen. or "Forgot graph.key?". The inscription may be different depending on the brand of smartphone. When you click, an automatic transition to the recovery occurs through the account.

Recovery via Google is only possible if an account is linked to the phone. Even if you forgot your Google credentials, they can also be restored via email. This requires only a computer.

  • Using the username and password, we enter the existing account associated with the phone number.

  • After automatic unlocking, go to the phone settings and set new security parameters.

In order to do this in this way, you will need a mandatory Wi-Fi connection.

Another quick and reliable way is to contact the service center of the brand. The password reset service is usually not very expensive, but you will have to pay for the operation, since it is not considered a warranty case.

Some brands of phones provide additional tools to locate the phone, lock or unlock it, even format it remotely if the device is stolen.

For example, Samsung has Find My Mobile - searching and resetting settings through a backup is the same way as with an iPhone. The option is available after logging into your Samsung account on a PC or any other device through which the search is carried out.

To find out if a particular brand of phone has the same functionality, you need to go to the manufacturer's official website or view the technical documentation (included in the package with the box upon purchase). As a last resort, you can ask the operator a question through the site in the feedback form.

This option works on devices using the Android operating system not older than 4.0.

Factory reset allows you to bypass the lock on any modern smartphones, including Chinese devices that don't have other built-in features. The operation will delete all user settings along with the pattern and numeric password.

Remember that in this case, all user data will be destroyed, if before that there was no synchronization with Google accounts or the user did not attend to the restore point in the absence of an SD card.

First you need to call the system menu using a special key combination. The combination differs depending on the brand of the device and the configuration of the model, for example, for Samsung and Lenovo. To find out which combination you need to use, you can check the technical documentation of the model that comes with the box upon purchase, or go to the official website in the FAQ section.

After that, follow the instructions:

  1. Turn off your smartphone and hold down the keys to open the system menu (depending on the model and brand).
  2. Click on "wipe data / factory reset". If the sensor does not work, use the sound keys "-" and "+" to select the desired item.
  3. After that, all settings will be automatically reset and the phone will reboot.
  4. Enter a new pin code.

This option works with all phones running on newer OS versions. This operation may not work with older versions due to the lack of such functionality.

All of the above methods work the same for both the pattern and the digital password. There is another method that may work with some models and brands of phones - an incoming call.

You do not need to enter a password to receive an incoming call. After receiving an incoming call, do the following:

  1. Go to the "Contacts" menu, if this option is available in the conversation interface. From there, through the "Home" button, you can get to the phone's desktop and go to the settings to disable the pattern.
  2. If the previous option is not available, try swiping from top to bottom to bring up the top menu of your phone. There, find the "Settings" icon and go to them directly. This option is available on some OS versions.

The mentioned method will not work on all smartphone models, but this option is worth checking first, since it is one of the simplest. In the same way, you can try to reset the digital password.

Another simple option is to wait until the battery is low and enter the battery status menu. Through it, you can go to the phone settings and remove the lock by setting new parameters or resetting them altogether.

Unlocking on older versions of Android

For older versions of Android, there are different ways. The security level of such operating systems is lower than on modern smartphones, due to which you can get by with simple options. Older Android versions (5.0 and below) allow you to unlock your phone during a call.

Most push-button phones (for example, Nokia) that do not work on Android can be unlocked by pressing the "*" or "#" keys (depending on the brand).

How to unlock iPhone

In the case of the iPhone, everything is somewhat simpler, since the manufacturer has provided two simple ways:

  • iCloud;
  • iTunes.

If none of them worked for one reason or another, you should contact the service center and do not try to hack the phone yourself using additional utilities or by connecting to a PC, as this will automatically void the warranty period due to user intervention in the OS.

  • Sign in with your Apple ID on iCloud.com.

  • Go to the "Find iPhone" menu. The section will display your phone.

  • Next, click "Remove device" and enter your Apple ID password to confirm the operation. You will then be able to unlock your smartphone.

The method will work only if the "Find iPhone" function was enabled before and the smartphone is connected to Wi-Fi or a mobile network.

  • Connect your smartphone to PC via USB cable. It is important that this is the computer through which the synchronization was performed.
  • After the automatic synchronization is complete and the backup has been created, click on "Restore".

  • In the parameters of the restore process, you must select the "Restore from iTunes backup" option.

  • Select your device from the dropdown menu and start the restore process by checking the last backup. After restoring, all settings will be reset and you can set a new password.

It is possible to recover deleted data via iTunes when connected to a PC.

If your smartphone is locked, and you can't remember the password (either digital or graphic), you can use one of the many methods to bypass the lock. It is important to remember that the simpler it is, the better. And if you cannot unlock the phone yourself, it is best to contact the service center so as not to disrupt its functionality out of ignorance. This is especially true for iPhone owners who are forced to comply with stricter operating rules so that the warranty period is not violated due to user intervention.