Can the old SIM card be cut. Cutting a SIM card to Micro size with your own hands

The creators of modern mobile devices strive to make them more compact and thinner, introduce new opportunities thanks to the development of technology. All this leads to a change in generally accepted standards. Phone owners are constantly faced with this manifestation of progress - with almost every new generation of phones a new type of charger appears, and in recent years, instead of standard SIM cards, which are available in any sales office of mobile operators, micro and even nano SIM cards began to appear.

A small SIM card saves valuable space in a mobile phone, and owners of the latest models, for example Samsung and Apple, are faced with the fact that a standard SIM card does not fit the device. In this case, all the functionality of the card will be preserved, only its size changes: 12x15 mm for the micro versus 15x25 mm for the standard one. In this article, we will tell you what to do if a SIM card does not fit into a modern phone.

How to cut a SIM card for Micro SIM?

Owners of new phones often face the problem of cutting off a SIM card after purchasing a new item: not all sellers warn that a standard card is not suitable for certain models that require a micro SIM card. In this case, you can trim the SIM card yourself.

In fact, this is not as difficult as it might seem. In order to make a micro SIM from a regular SIM card and cut off the excess yourself, you will need:

• pencil
• ruler
• sharp scissors
• sandpaper

To simplify the process, we recommend using the micro SIM card template - download and print it. After that, stick your SIM card with adhesive tape on the printed sheet of paper over the selected template. Then, using a ruler and a pencil or pen, draw the dimensions of the future micro-sim on the SIM card.

Carefully cut it out with sharp scissors or a clerical knife and trim the edges with fine sandpaper. Additionally, you will need to slightly sharpen the thickness of the card from the side of the logo with sandpaper. That's it, the Micro SIM card is ready and can be used for its intended purpose.

If, after trimming, you want to use your micro SIM card in a phone with a standard slot, you do not have to change it, you just need to purchase an adapter for micro SIM cards in an electronics store.

Or you can use a ruler to measure the dimensions you want and manually cut off the excess plastic. When marking, place the SIM card with the chip facing up so that the beveled edge is at the top right. To the right and left of the edge of the SIM card, measure and cut 1.5 mm, from the bottom - 2 mm and from the top - 8 mm.

Be careful not to damage the gold chip on your card. Now measure where to cut the beveled corner: from the upper right corner 2 mm down and the same amount to the left, connect the points obtained using a ruler and a pencil, and then carefully cut. Slightly round the edges of the SIM card with scissors.

Sometimes it's easier to change than cut

In the event that it seems too difficult to cut out a micro SIM from an ordinary SIM on your own, then you can seek help from a consultant in the office of your mobile operator - Beeline, Megafon, Tele2 or MTS. Ask to change your SIM card or cut it - they will be happy to help you.

When replacing you will be given either a universal card on which micro and nano sizes are already outlined. All you need to do is to carefully squeeze the SIM card of the desired format out of the plastic frame. The only inconvenience when replacing a SIM card is that the numbers from it will need to be saved to the phone.

Also, in the salons of communication there are special devices that allow you to quickly and accurately cut any SIM card to the required slot size on a mobile device, both micro and nano. This service is provided free of charge, and the SIM card is cut to the required parameters in a couple of minutes.

So, you bought a new phone, and then, here's the bad luck, it turns out that your old, beloved SIM card does not fit into it, no matter how hard you try to shove it there. If you were not warned in advance which SIM card the device you purchased is equipped with, and you did not purchase this card, then you have 2 options:

1) Go to dear operator and ask for nano- and micro-sim availability;

2) Cut out from the available Normal or micro-sim what you need.

We will now talk about the second option. I warn you right away - this path is for the lazy, experimenters, or lazy experimenters. There is a chance (although experience suggests that it is also from the micro, or even nano category) to damage the SIM card, so if there are important contacts on it, save them first.

How do we have the opportunity of such a vital conversion of SIM card formats? Due to the fact that a SIM card is a thin little chip with contact surfaces, this is the notorious piece of iron that we all have seen and know perfectly well, and a plastic plate to which this chip is simply glued. Naturally, all information is stored on a chip, and therefore with plastic we can do whatever our darling wants, as long as the contact surfaces are where we need it.

So, whatwe will need?

1) Ordinary ruler, and for nano-sim vernier caliper / good eye or printer;

2) Ordinary (but good at cutting plastic) scissors;

3) Pencil, pen or fine marker;

4) Fine sandpaper (for nano-sim, as it is thinner).

Now directly instruction:

We make a micro-sim from a regular SIM.

The picture above shows what dimensions the micro sim has and how it should be marked.

We take a ruler and mark it out, and if you believe in your eye, then we figure it out, and then we cut it.

We make nano-sim from a regular or micro sim card.

Here it is already more complicated, because the final product is smaller and needs to be adjusted in thickness. It is possible that the contact pads for an ordinary SIM card will be larger than the entire nano-cim, then you will have to cut it for metal, and the survival rate of SIM cards after such an operation is about 80% (own research conducted on cards of different operators)

Dimensions of the nano sim card from the specification: width - 8.8mm, length - 12.3mm, thickness - 0.67mm

Option number of times (requires a caliper or eye gauge):

As you can see, here the count goes to tenths of a millimeter, but we don't worry too much, the main thing is that the contact surfaces are right where they need to be and the chip is not damaged.

If there is a caliper, we accurately measure and cut off everything that is unnecessary, if not, we cut along the edge of the piece of iron, and then adjust it to fit into the tray. IMPORTANT: do not forget where the corner was, a small and neat one is also present on the application!

Having placed the SIM card in the tray, we go through the plastic side with sandpaper so that the tray with the SIM card can freely enter the phone.

Option number two (requires a printer):

We save the corresponding picture, presented under the title, on the desktop. Create a Microsoft Word Document and insert it, and then stretch it until the outline of the SIM card coincides with your SIM card. Then we print, take a ruler and a marker, and, fixing the SIM card on the template, draw along the ruler, continuing the already prepared lines. We cut it off, adjust the thickness of the pouch, insert it, rejoice.

If the SIM card is inserted and works - victory! If it is not inserted, we cut it, if it does not work, go to the operator and calmly restore the SIM card.

When buying a new phone or smartphone, we first of all look at the moments that are most important to ourselves. For some, this is design, while others pay attention to technical characteristics. However, almost no one is ever interested in what slots a new gadget for SIM cards has. At this stage, you may encounter the problem of how to cut a SIM card under a micro-SIM with the help of improvised means, because you already want to use the device, but the card simply does not fit into it. In this article, we will look at several methods on how you can cut your card without damaging it.

Using ready-made micro-SIM as a template

The easiest option would be to find a friend who already has a ready-made card of the size we need. With modern trends in reducing the size of everything and everything that concerns technology, it will be quite easy to do this. This will simplify the first way to solve the problem, how to cut a SIM card for a micro-SIM.

After that, you will need to combine your card with the cut one so that the cut control corners and chips completely coincide, and circle the outline. To cut off the plastic, you can use any means at hand, be it a knife, scissors, or even a needle heated over a lighter. When cutting, try to match the outline as much as possible. Do not be afraid to cut, because you will not be able to hook the chip, and accordingly the card will remain intact in any case.

This was the first way to cut a SIM card under a micro-SIM with your own hands. But what if no one has a ready-made card of the right size? The second method will come to the rescue, for which you need a computer and a printer.

Printing a template

If no sample was found to cut a SIM card for micro-SIM, the template can be found on the Internet, downloaded and printed. This method requires a computer and printer on hand. In addition to them, you will need a clean sheet of paper and good glue or double-sided tape.

The downloaded template should be printed in such a way as to maintain the dimensions and proportions. The template will indicate exactly where all the lines should go. Using glue or double-sided tape, glue the cut-out printout evenly onto your card and cut it along the lines shown in the template.

After completing this procedure, it is advisable to remove the glued paper from the card so that it does not accidentally remain in the slot when the SIM card is removed and does not spoil it. Now you already have two ways in your arsenal of how to cut a SIM card yourself for micro-SIM. However, this is not all, because there is a third and simplest method, which, however, will require small financial costs, but has its advantages.

Using a special cutter (hole punch)

If you know that this card to be cut is definitely not the last, and in the near future you will have to carry out this manipulation with several more cards, then you should think about buying a cutter. It is a small press, which contains knives that cut the card exactly to the required size.

With it, you don't have to transfer sizes for a long time, look for templates and more. Often, such cutters, or hole punch as they are called, have the ability to cut cards to any modern size. In addition, after trimming, a whole plastic frame remains, into which, if necessary, the trimmed SIM card can be glued back. The cost of this device is quite low, and you can find it in almost any mobile accessories store. Its purchase will save not only money on trimming in service centers, but also your own time, because the process itself takes 5 seconds at most. This is the third and easiest method on how to cut a SIM card for a micro-SIM. But there is one more, which can rightfully be called strange, but deserves the right to exist.

Cutting with a heated mold

The Chinese, developing devices for cutting, went even further, and made a budget version of the cutter. It is a metal shape on a spoke, which should be warmed up on gas or a lighter, and then gently attach to the card and melt the desired part of it.

Quite sophisticated, but still practical and fast way. It is perfect for those who do not want to overpay for the cutter, but would not mind speeding up and making the cutting process easier. Now, faced with the question of how to cut a SIM card under a micro-SIM, you will know at least four options. And you can choose the most suitable for you among them.

Output

Do not be afraid to manipulate your equipment. In almost any case, your card will continue to work unless you hook the chip itself. Knowing how to cut a SIM card under a micro-SIM with your own hands, you will save a small part of the family budget, as well as your time, which can be spent on going to the service center.

If you are unlucky, your hand trembled and the card was damaged, then you should not worry too much either. In the official salon of your operator, you will be given a duplicate of it. Some operators do this for free. In addition, modern cards are already pre-cut according to all necessary standards, so all that remains is to break out of the mount the one suitable for your smartphone.

The vast majority of modern smartphones, especially ultra-thin ones, only work with small Nano-SIM cards due to the fact that they are slightly thinner than their standard "brothers" Micro- and Mini-SIM. Despite the difference in dimensions, the chip is absolutely the same. That is why, if necessary, you can cut the SIM card for Nano SIM yourself. Many communication salons offer to cut a SIM card for money. If you are afraid to do it yourself, you can use their services.

By the way, recently telecom operators began to make SIM-transformers:

The user just needs to break out the size that he needs. Moreover, if necessary, you can not only reduce the size of the card, but also increase it back.

So, how to cut the SIM card for Nano SIM and not spoil it at the same time? I offer you two options.

Nano SIM Card Template

I present to you two templates for Nano-Sim, which must be downloaded, printed on A4 sheet and used in accordance with the instructions. For work you will need good sharp scissors, a powerful construction knife or metal scalpel, a nail file, as well as a plastic or wooden board.
Attention! The templates below allow you to make a Nano-SIM from both regular and Micro-SIM.
Template 1 - Download
Cut out the size you want and stick it on your SIM card. After that, you need to cut it under the Nano-SIM card. Sharp or crooked edges can be corrected with a nail file. The main thing is not to damage the chip.

After that, it will be possible to cut the SIM card for the Nano-SIM along the contour. The main thing is not to touch the chip!
File sharp or curved edges.
After that, you can insert the Nano-SIM card into the phone and check its operation. Good luck to all!

For quite a long time, mobile users used SIM cards of the usual format, and there was no need to cut a SIM card to micro or nano format. However, the rapid development of mobile technology has led to the fact that phones have become larger, and sim, more miniature. Now most of the new devices use nano sim cards.

You can cut a SIM card at home on your own and up to a micro SIM format, and before applying, however, with the advent of new types of SIM cards, services have appeared on the market that allow you to make a micro or nano SIM from an ordinary one. Today, all new SIM cards from operators have a universal format and are suitable for use in any gadget.

Today we will tell you how to make a microsym out of an ordinary mini SIM card and apply: how to reduce the size according to the template yourself, how much does it cost to cut a SIM card in the salon, and is it possible to do without trimming mini sim to micro or nano, and get the one you need for free from the operator.

Pruning

Many users, using a mini SIM card, prefer to cut a regular sim to microsim or nanosim with their own hands, or use a cut card in the salon. This option can have its advantages, albeit rather dubious. As an argument to convert your SIM card into micro and nano, many people cite that it is not difficult to do this, and trimming the sim does not take much time, unlike replacing the operator.

We'll tell you about the advantages of replacing the operator later, but for now, about how to make a nano-and micro-SIM out of an ordinary SIM, how much it costs, and is it difficult to cut a SIM card at home. There are two options for how you can cut a SIM card for micro and nano at home or in the salon, and there are no special conditions for this.

You can cut a mini SIM card at home without a special stapler for micro and nano, and the main thing is not to damage the SIM card microcircuit using a template. You can cut any SIM card, no matter how many tracks on the microcircuit are 4 or 3. Just print a micro sim-card or nano template on the printer, attach your usual SIM card to it to get a micro and nano SIM card with your own hands.

If you have never cut a SIM card before, then when using a micro and nano SIM card template, you need to trim the extra edges of your card with a margin. In this case, the excess of the remaining excess plastic can be sharpened with an ordinary nail file, but it is impossible to “glue” the excess back on. Use a construction knife or office scissors to cut a mini SIM card for a micro home.

The second option is to convert sim at home into microsim and nano - using a Micro / nano sim cutter. It is not a problem to buy it, and you can order it both on the Internet and purchase it in accessories stores. However, in this case, the cost of the process of trimming the sim for the micro and nano card will increase in proportion to the cost of the stapler. Its price, depending on the model, can range from two hundred to five hundred rubles. Of course, it is illogical to acquire it in order to cut it out of an ordinary micro or nano sim once.

If converting your sim into microsym does not work without a stapler, then contact the specialists. For a hundred or two hundred rubles, they can convert a SIM card into micro or nano in a minute.

Replacement

Cut or change the SIM card is up to you. Many mobile phone users, after looking at how micro and nano SIM cards look, think to take the one they need from the operator for replacement, or simply cut off the usual one, because the visual difference is only in the amount of plastic framing the chip. However, if you ask the opinion of specialists, then everyone will say that it is better to switch from a regular SIM card to using micro and nano with a new card from the operator.

What is a mini SIM card, and how does it differ from a newer format, and really, wouldn't it be better to just cut it? Behind the external similarity, completely different cards are hidden.

The cards of the new format use completely different microcircuits, which allow not only using more information on them, but also using high-speed data transmission. If you have an old regular card, you will not be able to register your phone in LTE networks.

Also, the main thing for any user is the question of how much it costs for operators to replace a SIM card with micro and nano. The federal four, except Beeline, offer this service free of charge. At Beeline, the service is paid in the amount of thirty rubles, but if you replace an old card that does not support 4G, the operator will return the funds to the balance in the form of bonuses.

To get a new card, you just need to come to the office of your operator, and after filling out the application, you will receive a new SIM card. This requires a passport. The new SIM card can be used in all three formats by simply separating it from the base of the desired size.